PDA

View Full Version : Swordfish 200+ ESC


jfrancisco892
05-21-2013, 11:41 PM
Building a whiplash for p sport with a 1515 2D, 4s2p 3700mah. How would this speed control work?
HTVboats
05-22-2013, 07:09 PM
Been running a SF200 with a 1515 1Y in a P tunnel for a couple years. Have one in my P mono with a 1518 1.5D also. Been a good controller for heat racing.
Mic
jfrancisco892
05-22-2013, 07:13 PM
Been running a SF200 with a 1515 1Y in a P tunnel for a couple years. Have one in my P mono with a 1518 1.5D also. Been a good controller for heat racing.
Mic

So the 220 pro plus should be killer?
Mulisha
05-22-2013, 10:26 PM
I have a 220 pro plus on order for my tunnel hull, either Leo 4082 or neu 1521 if I can scratch up the money. For the small price difference with data logging I think it's a great speedy. Where you the one looking for one from aus??
jfrancisco892
05-22-2013, 10:29 PM
http://www.ebay.com/itm/370808214629?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. Just bought it and gonna run a 1515 1y (2200kv) on it.
HTVboats
05-23-2013, 10:07 AM
http://www.keithbradleyboats.com/?wpsc-product=swordfish-saw-edition-220300a-2-6s-esc

Here is another SF220. I have 2 and one doesn't seem to work all the time. They tend to run a little hotter than the SF200's I have. Heifi seems to be coming out with a lot of new equipment. Not all proven in my mind. For what it's worth the 200 and 240's have performed flawlessly for me. The 220 and 300pro have had some inconsistencies, cutting out and not getting full throttle. I recommend not using the BEC's, just a receiver battery with a short extension lead with the red wire cut. The 200 runs my 1521 on 6S very well too.
Mic
jfrancisco892
05-23-2013, 12:23 PM
Maybe they are different than the pro plus?
HTVboats
05-23-2013, 03:58 PM
Looking at the dimensions the 200 and both 220's are different sizes. I know the 200 works well and 220/300 has not had enough use yet to give a final review. When you get your 220/250 installed please give us all some feedback.
Mic
Mulisha
05-23-2013, 04:11 PM
I would use a bec also but Don't cut the red wire otherwise you can't program it or use your data logging. Just pull the wire out of the harness and tape or shrink wrap it as it will have power to it.
jfrancisco892
05-23-2013, 04:17 PM
Looking at the dimensions the 200 and both 220's are different sizes. I know the 200 works well and 220/300 has not had enough use yet to give a final review. When you get your 220/250 installed please give us all some feedback.
Mic
Will do