Miss Geico 17" build

[Gabe_k]

Alright, instead of taking over zacks thread I decided to make my own.. We all know that the stock set up is junk!! That set up went in the trash as did the straight drive! I have the stock mini mono set up in it and flex shaft deal. I came across the DIY thread so I ordered a .098 flex shaft with the bigger 3/16 tubing and coupler that will be going on this boat. I also ordered a new strut and rudder assembly and a water cooled motor mount (since it's a out runner motor)

After I cut the shaft out..
http://i197.photobucket.com/albums/aa108/abcgabe/982E8795-A9BD-4616-863C-D70141174279-12220-000007F2951FD96C_zpsa0814255.jpg

Mini mono shaft installed (will be changing it out to 3/16 and a strut)
http://i197.photobucket.com/albums/aa108/abcgabe/5F268E81-8816-41E4-A44A-F16BBCC03A5C-12220-000007F2A06E3ED8_zps884464f6.jpg

MM setup..
http://i197.photobucket.com/albums/aa108/abcgabe/23915A48-6D62-41CF-8088-7FD4BD59AD8D-11744-000007AEEABACF1A_zps5fb9c262.jpg

I will be updating with pictures as soon as I receive the parts (hopefully Thursday)
This is my first time doing something like this so for you guys who think you can't do it.. You can, it's very easy! Any tips or tricks will be appreciated!

[Heaving Earth]

My tips would be this, having a strut to hold the stuffing tube is a good idea, also offsetting the rudder would probably help.

[Gabe_k]

Yup, strut is a must.. I didnt have an extra one to use when I did this, but I've already ordered it! As far as the offset rudder... I really like the way an inline handles but I think I might have to offset it dude to clearance with the strut/rudder that I ordered.

[Speedracer128]

What's up Gabe?

Now I'm watching your's and Zacks build. What speed are you trying to get this 17 to?

[Gabe_k]

Well I'm keeping the mini mono motor in it so hopefully 30.. I just ordered a barbwire so this project may be put on hold lol

[Gabe_k]

Got some progress done... Strut and rudder are mounted. Built the flex shaft and got the flex tube where I want it, just have to epoxie it in now... http://i197.photobucket.com/albums/aa108/abcgabe/594D5131-4C99-4B9C-AFBD-F7D83FB32546-6595-000004676BB0342C_zpse5611390.jpg
http://i197.photobucket.com/albums/aa108/abcgabe/8B5D2E7B-59BB-4400-AB9E-1EF63C287BCF-6595-0000046738C20A1A_zps9d3bbdfd.jpg
With the new strut, the prop is set pretty far back... Is that a bad thing?!
http://i197.photobucket.com/albums/aa108/abcgabe/F9695613-C4FE-4171-BD2D-B646BCB6376A-6595-000004673DC17270_zpsb425bc3b.jpg
Still got to install the motor mount
http://i197.photobucket.com/albums/aa108/abcgabe/E85ABB51-CF6D-4819-BC3C-D33FD2FDDB78-6595-00000467429BDB12_zps137c64e1.jpg
I also didn't realize how much shorter the new rudder is... It should work fine though
http://i197.photobucket.com/albums/aa108/abcgabe/2AEC676F-436D-4AAB-BD99-CC8254F0329A-6595-0000046748763714_zpsb7a95490.jpg

[Speedracer128]

How's your barbwire. I got my sons law week and I have fun driving it too

[Gabe_k]

best $150 ive ever spent... my buddy and i were racing last night off that waterfall jump and the thing just doesnt stop. I love how it subs and then comes up like 10 seconds later haha

[Speedracer128]

Haha. Yeah my sons submarined and didn't come up for a bit. I wasn't sure if it was stuck to the bottom. The boat is perfect how I comes but I still got an octura prop for it and I think I'm going to attach a piece of styrofoam to the lid. But it's a fun boat

[Gabe_k]

Got the flex tube epoxied in... Doesn't look pretty but it'll work.
http://i197.photobucket.com/albums/aa108/abcgabe/DA19E177-BBD3-4C80-A882-7E20B05B558C-8025-00000547B7168AB4_zps9ca64771.jpg
http://i197.photobucket.com/albums/aa108/abcgabe/966848EF-8E44-4433-9A84-F89E9B0C7FC6-8025-00000547C2FBDD5B_zps1bda3c95.jpg
Got the motor aligned and epoxied in also..
http://i197.photobucket.com/albums/aa108/abcgabe/CD9E7991-5E52-4BED-B8A1-47D9078AB730-8025-00000547BDDCB635_zps7f87a054.jpg

I also moved the rudder as far down as I could to get it a little more in the water. I should be finished tonight with this thing.

[Speedracer128]

Good luck. I can't wait to see this MG run

[Gabe_k]

http://i197.photobucket.com/albums/aa108/abcgabe/4B4D7BB6-989C-4B88-82EC-DC274179A307-10306-00000699748A318B_zpsbef0041a.jpg

She is done. First pool test was disappointing. Had a 30mm prop on it(stock size on the mini mono) and it cavitated like crazy. It was slower than the stock electrics lol

I figured the strut was too high(it's set as low as it can go) so I figured I'd have to redo the flex shaft. I put a plastic octura 34mm on it and that fixed it. It jumps out of the hole now! She'll have her maiden voyage at the lake hopefully tomorrow.

I also forgot to mention that I bought hobby people plane servos that I'm running in this and my barbwire. $16 and they are incredibly quick! Makes it super fun to drive!

[tlandauer]

http://i197.photobucket.com/albums/aa108/abcgabe/4B4D7BB6-989C-4B88-82EC-DC274179A307-10306-00000699748A318B_zpsbef0041a.jpg

She is done. First pool test was disappointing. Had a 30mm prop on it(stock size on the mini mono) and it cavitated like crazy. It was slower than the stock electrics lol

I figured the strut was too high(it's set as low as it can go) so I figured I'd have to redo the flex shaft. I put a plastic octura 34mm on it and that fixed it. It jumps out of the hole now! She'll have her maiden voyage at the lake hopefully tomorrow.

I also forgot to mention that I bought hobby people plane servos that I'm running in this and my barbwire. $16 and they are incredibly quick! Makes it super fun to drive!
Looks great and I have to say that it takes determination to mod these boats which is what I don't have so :bowdown: to you.
What paint did you use on that Duratrax stand, looks like a good match for the hull paint, wonder if it matches the MG V1 ?

[Gabe_k]

it was more work doing research on what i needed than actually building it lol. I tested it in the pool again thankfully and the esc caught on fire.... too big of a prop for it! so ill end up ordering a seaking 35 pretty soon.

that stand is for my rc cars.. it came in that color. ill have to check and see what brand it is, i dont think its duratrax

[Gabe_k]

You guys probably can't tell what my favorite colors are... Lol

http://i197.photobucket.com/albums/aa108/abcgabe/IMG_0632.jpg
http://i197.photobucket.com/albums/aa108/abcgabe/IMG_0656.jpg
http://i197.photobucket.com/albums/aa108/abcgabe/1BABD568-5B89-4410-AEE4-EE19E57CA989-13658-000006DA0ED73228_zps31fbcfaa.jpg

[Gabe_k]

Had to take a pic with this boat at the drags
http://i197.photobucket.com/albums/aa108/abcgabe/468FCF75-25E9-4F8B-B1BD-EEE39C1DF6F7-12610-00000813E54805D7_zps96b07146.jpg

[Zackthrills]

Any videos of it running yet

[Gabe_k]

Nope.. It just sits as a decoration since I rebuilt my big miss geico. It did right around 30 totally stable and turned really well though.

[Zackthrills]

Ya I have to get mine back running I put the mini mono stuff in it months ago and I saw yours and then another guy should me how to make itty Mir drake mine would haul butt. Funny is when at first if you gunned it it would submarine then come back up and go lol. I burned up a motor and then an esc.lol but I got it rocking then stopped messing with it

[Speedracer128]

Gabe

Why did you change the servo in the barbwire? I'm just curious. IMO my barbwire turns perfect to the left and too sharp to he right. I was considering adjusting where the steering connects to the servo to the slot 1 lower. I saw someone modify it that way and it made he steering less sensitive.

[Speedracer128]

Any updates or progress on this project?

[djviko44]

Hey! Im new at the forum and got to this post, nice work, do you have any updates? Videos of the results??

[GEO302]

^^^^^ AGREED !! Your modifications are my Inspiration to get mine to the next level !

[GEO302]

Pm sent.Waiting for response.