IM 31 Prototype - BND

[Dangerous_Toys]

ALL SOLD!


Willing to part out...........

I have a Proboat Impulse 31 Prototype hull & hardware that I got here on OSE from Darin Jordan. Here is the link that I purchased it from that will explain about the hull.......http://forums.offshoreelectrics.com/showthread.php?39363-ONE-of-a-Kind-Impulse-31-quot-Prototype-quot-Hull-and-hardware-setup. I added new esc, motor and jacket, rx and a S/B X447 prop as well as the vinyl graphics. She has been sitting on a shelf since then and has had zero runtime on her. I have my gas boats that I will be running this year so this wont get used. I'd like to keep her and get her wet but I just dont see that happening this year. She is setup right now to run 2 4s batts in parallel. Here is a breakdown on prices for part out. Prices are shipped Conus....................



IM 31 Prototype Hull & Hardware....SOLD!
Seaking 180 Esc with Programmer....SOLD!
Leopard 4074 2200kv Motor w/ waterjacket.....SOLD
Spektrum MR200.....SOLD!
Octura X447 S/B.....SOLD
2X Turnigy Nano Tech 4s 5000Mah 35c-70c Lipos.....SOLD!
2X Turnigy Nano Tech 4s 5000Mah 45c-90c Lipos.....SOLD!


No PM's. First to say "I'll take it" for asking price gets it. Any offer accepted is at my discretion.....

[Dangerous_Toys]

More pics.................

[DK535]

If you break it up ill take the prop

[Dangerous_Toys]

If you break it up ill take the propIf you need an X447 prop, I have an X447/3 that is S/B I can sell.

[lenny]

How much do you want for the x447/3 ?

[DK535]

Yeah I'm interested. How much?

[Dangerous_Toys]

Yeah I'm interested. How much?$35 shipped to you. I absorb PP fees.

[DK535]

Ill take it

[DK535]

PM me your PP

[Dangerous_Toys]

PM me your PPPM Sent

[DK535]

Payment sent ! Thanks again

[Dangerous_Toys]

Payment sent ! Thanks againThanks Bruddah! I'll get it out in the morning.

[lenny]

:banana:
It's about time you got one Damen.:lol:

[Dangerous_Toys]

:banana:
It's about time you got one Damen.:lol::rockon2:

[arnie84]

I would do $150 for hull and all running harwear it is just an offer & just throwing it out there as an option for u cause u see u installed motor and esc already. I have motor and esc from badly wrecked miss geico I got from friend

[Dangerous_Toys]

I would do $150 for hull and all running harwear it is just an offer & just throwing it out there as an option for u cause u see u installed motor and esc already. I have motor and esc from badly wrecked miss geico I got from friendNo thank you. I would however consider trades for large hulls with 5" stringers or Marine gas engines.

[arnie84]

All I have then is a new aquacraft rio 51 with a zenoha g26

[Dangerous_Toys]

All I have then is a new aquacraft rio 51 with a zenoha g26Hey Arnie, I'm looking more for high performance hulls and engines. I guess I should have mentioned that. If you keep that Rio you should get rid of that velocity stack and put a hot pipe or aluminum band pipe on it. You'll get way better performance out of it.

[arnie84]

I cant run gas a local pond anymore an airplane blew up a lipo and ruined for everyone got it for christmas. So your saying the rio sux?:laugh:

[J.W. Pepper]

More pics.................

Holly crap Robert, I can't believe that's the same boat you sent me pix of last week... talk about night 'n' day.

You did a fantastic job on a boat that basically started out as a bare hull with some hardware. Wish I could do that.

[Dangerous_Toys]

I cant run gas a local pond anymore an airplane blew up a lipo and ruined for everyone got it for christmas. So your saying the rio sux?:laugh:I have never ran a Rio. But I do know that a pipe will bring out the performance in a engine rather than a muffler.

[Dangerous_Toys]

Holly crap Robert, I can't believe that's the same boat you sent me pix of last week... talk about night 'n' day.

You did a fantastic job on a boat that basically started out as a bare hull with some hardware. Wish I could do that.Thanks Bruce! Someone will get a nice boat. As listed in the original post, Offers are welcome.

[Dangerous_Toys]

Price drop

[DK535]

Got the prop a few days ago. Thanks again

[Dangerous_Toys]

Got the prop a few days ago. Thanks againGlad you got it! Enjoy!

[Dangerous_Toys]

Ttt

[dirtnsnowrider]

Would you be interested in a lightly used Chung Yang (KWA 4.5) as trade for the hull/hardware and motor with jacket?
The collet included is an Speedmaster 1/4 round

98866988679886898869

[Dangerous_Toys]

Would you be interested in a lightly used Chung Yang (KWA 4.5) as trade for the hull/hardware and motor with jacket?
The collet included is an Speedmaster 1/4 round

98866988679886898869That motor is a little too small for my applications. I run modded Zen's 28.5 - 29.5 with 6 - 7 hp. Thanks for the offer though.

[dirtnsnowrider]

I gotcha, no problem.

[Dangerous_Toys]

Ttt

[Dangerous_Toys]

Price Drop!

[Dangerous_Toys]

Willing to part out, however the hull/hardware must sell first. Prices for individual items are listed in OP.

[lv_reefer]

I don't mean to put the cart before the horse. I see the hull needs to sell first but can I reserve the 45c 4s packs? How many cycles do you have on them?

[Dangerous_Toys]

I don't mean to put the cart before the horse. I see the hull needs to sell first but can I reserve the 45c 4s packs? How many cycles do you have on them?They are new, never been cycled. If you want them I am willing to let them go. Just let me know and i'll send you my PP info.

[adifrum]

If lv_reefer dont whant the 2X Turnigy Nano Tech 4s 5000Mah 45c-90c Lipos.....$95 I will take them shipped to NY 11413. Send me your PP info.

[Dangerous_Toys]

If lv_reefer dont whant the 2X Turnigy Nano Tech 4s 5000Mah 45c-90c Lipos.....$95 I will take them shipped to NY 11413. Send me your PP info.I'll let you know this evening. I want to give lv_reefer 24 hours.

[adifrum]

Ok !

[rogley]

I will take the other two batteries 30 to 70

[lv_reefer]

pm sent

[Dangerous_Toys]

I will take the other two batteries 30 to 70lv_reefer bought all the batteries.

[JimClark]

I will take the MR200 if you end up splitting it up that far

[Dangerous_Toys]

I will take the MR200 if you end up splitting it up that farIts yours Jim. Pm coming your way with info.

[JimClark]

paypal sent thanks much

[Dangerous_Toys]

paypal sent thanks muchPayment Received. Thank you!

[nitronuts]

145 for the hull/with hardware and ill take it

[Dangerous_Toys]

145 for the hull/with hardware and ill take itI'll meet you half way at $155.

[nitronuts]

counter 150.00 and is everything there accept motor esc and batts

[Dangerous_Toys]

counter 150.00 and is everything there accept motor esc and battsYou would receive Hull, Hardware, Servo, Flex Cable, Drive Dog and Prop Nut. I'll counter back at ya with $152.50 Shipped

[nitronuts]

what the heck ill take it

[Dangerous_Toys]

what the heck ill take itPM Sent. Sorry bout the duplicate messages

[nitronuts]

payment sent thanks /Joe

[Dangerous_Toys]

payment sent thanks /JoePayment Received. Thanks!

[Dangerous_Toys]

Ttt

[jim82]

I will offer $60 for the motor..

[Dangerous_Toys]

I will offer $60 for the motor..Really? Your gonna offer me $60 for a brand new $95 motor with a brand new $15 water jacket?:thumbsdown:

[jim82]

Oh sorry bout that bro chill...lol...Did not notice it was brand new..

[Dangerous_Toys]

Oh sorry bout that bro chill...lol...Did not notice it was brand new..No Problem

[Dangerous_Toys]

All sold!