PDA

View Full Version : Finally got around to do an upgrade


eocv
03-03-2013, 01:48 PM
Running now a Leopard 4074 2000kv motor and Leopard 180A esc with an octura m545. Now it is not the slowest FE from our group lol.

Don't have a gps so i cannot tell how much is pushing. Will need to do that. Temps are around 110-115 degrees F.

http://youtu.be/3-e2AsMNKcc
Heaving Earth
03-03-2013, 01:52 PM
Lookin good
Damn nice spot too
eocv
03-03-2013, 01:54 PM
Lookin good
Damn nice spot too

Thanks. An advantage of living in Puerto Rico. Good weather all year round :)
lenny
03-03-2013, 04:34 PM
Hi,
How long of a run was it for the 176F temp and on what S cells ?
eocv
03-03-2013, 04:38 PM
Hi,
How long of a run was it for the 176F temp and on what S cells ?

Looks like the post from my phone was incorrect on the temp. The run was 110-115 degrees F, 4 minutes. 4s.
lenny
03-03-2013, 04:43 PM
That is cell, esc , motor, ? Temps.
And on what cells ?
eocv
03-03-2013, 04:49 PM
That is cell, esc , motor, ? Temps.
And on what cells ?

Leopard 4074 motor on 4s (2s x 2). 180A esc. 110-115 degrees on motor and esc. 120 degrees on batteries.
lenny
03-03-2013, 05:00 PM
Ok that is good on the temps,
But what ( C ) and what ( MAH ) and what ( MAKE ) cells ?
eocv
03-03-2013, 05:02 PM
Ok that is good on the temps,
But what ( C ) and what ( MAH ) and what ( MAKE ) cells ?

Sorry lenny. 30c, 5000 mah, sky lipos from hobbypartz.
lenny
03-03-2013, 05:12 PM
:hug1::banana::bash::moon::doh:
Ok,:lol:
If you go up in the ( C ) to like a 40 or more you will see more power and speed out of it,
And may be it will run a little cooler to.

It is nice when you get the hole info on the setup,
Makes thing a lot easier to know what is going on.

Thanks for all the info.
eocv
03-03-2013, 05:15 PM
:hug1::banana::bash::moon::doh:
Ok,:lol:
If you go up in the ( C ) to like a 40 or more you will see more power and speed out of it,
And may be it will run a little cooler to.

Thanks for the advise lenny. Will keep it in mind when i get some new batts. I'm very happy with the motor/esc/prop upgrade.
lenny
03-03-2013, 05:32 PM
No problem,
You could also parallel with 4s packs to.
It would add a little weight to the setup,
and I think the boat what handle some chop better to.
eocv
03-03-2013, 05:33 PM
No problem,
You could also parallel with 4s packs to.
It would add a little weight to the setup,
and I think the boat what handle some chop better to.

Cool, thanks!!
GixerGuy1978
06-28-2013, 06:59 PM
That thing runs circles around that sailboat!:thumbup:
Sorry....couldn't resist! Lol
erickyam
09-09-2013, 11:40 AM
Hi EOCV. Just got my Revolt and planning on doing some upgrades. I’m from Canovanas PR. Maybe we can get in touch. Where did you get the motor from? Some sites won’t ship to PR or have a high shipping cost.
Shovelnoserc
09-17-2013, 08:07 AM
OSE Ships to PR no problems. I've been buying from Steve for over a year now. Priority Mail and Express Mail (for hull purchases) I'm from Fajardo. We have a little group that runs @ las Croabas and a River in Fortuna Luquillo. It would be nice to meet up.

JJ
erickyam
09-17-2013, 08:54 AM
Just got some parts from OSE. You can call me 787- 538-9581 Fy first FE boat a revolt 30. Im new at his but learning.