Leopard 4082 2200kv

[bbosncali]

For sale Leopard 4082 2200kv greanot for sale

[bbosncali]

Tttt

[bbosncali]

Ttt

[Alexgar]

might have an esc you could use too

[bbosncali]

What do you have

[Alexgar]

its a schulze 18.97 kwf here are the specs
http://www.icare-rc.com/motor_controls_brushless.htm

[cyprus31]

Great motor !!!

[mtbenjamin77]

what;s the condition of the motor? has it been used? are the bearings good? Who did you buy it from that you had to buy two?

[ray schrauwen]

Sealed or vented can?

[bbosncali]

Never noticed a difference til. Now but definitely vented
M

[mtbenjamin77]

the sealed cans have the wires coming out of the side, vented they come out the back thru a vent

[bbosncali]

Plenty of resistance fire right up there's a piece of tape mark on one can both motor s seem great. Guy sold them to me from greece would only sell both. Itvwasc worth it for cost I saved money rather then buying two

[bbosncali]

Let me chevk now I'm 2nd guessing myself

[bbosncali]

Definitely vented. .. what's the difference? I'm assuming waterproof and not???

[ray schrauwen]

I've seen sealed cans with wire out the back too... many different versions...

Great deal.

[ray schrauwen]

Water resistant for cars being sealed but, vented is better for boats for airflow and ease of clean out if swamped.


Definitely vented. .. what's the difference? I'm assuming waterproof and not???

[bbosncali]

Thanks for the clarification



Water resistant for cars being sealed but, vented is better for boats for airflow and ease of clean out if swamped.

[mtbenjamin77]

BBOSNCALI,

What's the history of the motor? What's the Condition? Are the bearing smooth? I'm interested, but need more info.

[bbosncali]

Ttt

[mtbenjamin77]

Yeah i put a 4082 in a MC and MG. The MC would do 63 consistantly, the MG the owner was too scared to run it full speed. Im interested in the motor for another build but I'm just a little concerned becuase it looks as if it's been dropped or at least had a rough life. If a motor takes a hard hit it can weaken the magnetic properties of the rotor. I build boats for customers and I can't risk using subpar equipment even if the customer just wants to save a few bucks. For 18 more I can get a new and not worry about it. I'll talk to my customer today and see what he wants to do.

[bbosncali]

Point taken but there are no dings tttt

[bbosncali]

Tttt

[bbosncali]

No nicks dings or blemishes except the tapes mark might be a small scratch after looking at photo with a fine tooth comb lol