New Hull! FOUNTAIN P1 50" / 127cm Twin Setup

[Alfa Spirit]

Hi,

Here is a new hull at home, I will run this deep vee with a twin setup 8S 6000mAh for each combo

[forescott]

Isnt there already a thread about this??????:confused1:

[Alfa Spirit]

In the question section

[Alfa Spirit]

..............................

[twissted]

It's a great looking hull keep up the work.
I was looking at the Central rc hull and building a boat like this.
I found it on the redline site.

[iamandrew]

where did the hull come from?
was it allready painted?
is this your boat?
what happened to the rapide?

[jkr]

What is the weight of it?
It would be nice to post fotos from the bottom.

[Alfa Spirit]

If you are interested send an e-mail to 'alex chen' <okey100@gmail.com>

The hull is vey well made and not very expensive 132 US$

90043900449004590046

I will use a twin setup, 4092 motors and 8S

[tlandauer]

:thumbup1:Nice!

[twissted]

I would like one for that price!

[Doby]

If you are interested send an e-mail to 'alex chen' <okey100@gmail.com>

The hull is vey well made and not very expensive 132 US$

90043900449004590046

I will use a twin setup, 4092 motors and 8S

In this other thread of yours for the same hull you supplied different contact information:

http://forums.offshoreelectrics.com/showthread.php?38579-Very-nice-Fountain-50-quot-P1-100-replica

See post #10....so which one is it????:confused1:

Its no wonder people get confused with your multiple threads on the same thing that never get built.

[forescott]

In this other thread of yours for the same hull you supplied different contact information:

http://forums.offshoreelectrics.com/showthread.php?38579-Very-nice-Fountain-50-quot-P1-100-replica

See post #10....so which one is it????:confused1:

Its no wonder people get confused with your multiple threads on the same thing that never get built.



Dont worry doby, he edited the contact info. Now they match!

[Brushless55]

In this other thread of yours for the same hull you supplied different contact information:

http://forums.offshoreelectrics.com/showthread.php?38579-Very-nice-Fountain-50-quot-P1-100-replica

See post #10....so which one is it????:confused1:

Its no wonder people get confused with your multiple threads on the same thing that never get built.

:blink:

[Alfa Spirit]

If I' ve got the money I will buy an other set of NEU Motors 1521 - 1,5Y - 1050kV with 8S batteries 4x4S 6000mAh for two motors.

[Alfa Spirit]

I edited the post #10

An other picture inside the hull

90068

[Rocstar]

If you are interested send an e-mail to 'alex chen' <okey100@gmail.com>

The hull is vey well made and not very expensive 132 US$

90043900449004590046

I will use a twin setup, 4092 motors and 8S
50'' for $132 US, really?

[MrUnlimited]

I know Alex for many years and he is a dedicated boater!

[Alfa Spirit]

The design will be very simple

http://img441.imageshack.us/img441/8267/41858657.jpg

[Brushless55]

Nice action shot!

[Alfa Spirit]

Actually I have only the rudder for the hull an Arrow Shark (????) with long 150mm bracket , I will use those stingers from HOR, model made for 1/4" shaft. I will build a 1/4" shaft steped down to 3/16" for propellers and a 3/16" hole at the other side to glue a 3/16" flex shaft


http://www.horracing.com/images/hstinger7.jpg

[Alfa Spirit]

I order 2 x 4092 - 930kV for the Fountain, 10S for each combo

http://img339.imageshack.us/img339/1562/40927n.jpg

I will make red stripres on the sides and add rhe numbers "99"

http://img594.imageshack.us/img594/8837/sfountainp136.jpg

[twissted]

This looks like a fun boat. It should do well in less than favorable waters.

[KillerDave]

This is looking great! Keep it up!!!
By the way, I want "red strippers" too but don't tell my wife! ;-)

[Alfa Spirit]

Hello KillerDave, how are you?
I don' t know how to make the red stripes painting or stickers. Or may be no stripes? What do you think? The design look great to me

http://img233.imageshack.us/img233/8596/sflyp139.jpg

[Alfa Spirit]

Motors arrived today, they look great,n well build. Motors are matched : 930kV


http://img820.imageshack.us/img820/2765/409210s.jpg

[KillerDave]

Hello KillerDave, how are you?
I don' t know how to make the red stripes painting or stickers. Or may be no stripes? What do you think? The design look great to me

http://img233.imageshack.us/img233/8596/suxflyp139.jpg

I would go for the red stripes but it still looks great as it is... I see you have some red tape there, stick it on one side, stand back and see what YOU feel????
I would paint it as the water will peel vinyl off.
Heat looking boat you have!

[Alfa Spirit]

Well I' ll stick red vinyl from the sheet like this

[Alfa Spirit]

I received HRC water jackets 68mm long. The design of the FOUNTAIN is finished, I don' t know if I will apply a clear coat




If somebody is interested I sale two 40mm x 50mm water jackets

[Alfa Spirit]

I received motor mounts made by Hervé, I made some modifications because the HRC water jacket is 68 mm long .

[Alfa Spirit]

Parts of the hardware, stingers are very well made, I like the rudder with 4 water inlets, center mount and 2 arms for linkage


http://img15.imageshack.us/img15/3094/sp152.jpg

[twissted]

looks like a grate wardware. should be a fast boat. getting the stingers low as possible on a build like this is what will be the trick to getting fast.
Don't be afraid to work the rudder over to get the most from it. some stingers only pick up water frome one side. you should modify so that it picks up from both and polish when done. Are the stingers from HOR Racing?

[Alfa Spirit]

The rudder have 2 water inlets on both side , 2 on right side and 2 on left side that will give a good pressure for watercooling.
Yes the stingers are HOR models (3/16")

I made a set of cap banks for ESC, caps are 1000µF 63 Volts

http://img405.imageshack.us/img405/1945/temp422.jpg

[twissted]

Nice looking build so far!

[Alfa Spirit]

Thanks Twissted


This 50'' FOUNTAIN P1 hull is now available on Ebay, 237 US$ shipping included

http://cgi.ebay.fr/Fiberglass-50-P1-boat-hull-rc-boat-/160923448421?pt=UK_ToysGames_RadioControlled_JN&hash=item2577c8f465

[Alfa Spirit]

The 4092 - 930kV motors with HRC water jackets and aluminium motor mounts :banana:

http://img594.imageshack.us/img594/6009/suxflyp145.jpg

[iridebikes247]

Wow the boat does look good with the decals. When will it be seeing water?

[twissted]

I live in a place that has ice, this time of year. I'm ice fishing this time every year. It could be the problem. Or he just is taking his time. I have a lot of builds that I jump on and take a brake and work on something else for a while. You just need to look at other builds for awhile and wait.

[Alfa Spirit]

Here is what I need :

- 2 x High Voltage speed controlers

- An other receiver Spektrum MR200

- A medium servo strong enough (15Kg)

- A LiFe 2S battery

- 4 x 5S 5000mAh batteries

- spare parts ....


For instance, here is the hardware I have :

http://img827.imageshack.us/img827/7453/powerboatp17.jpg

[Doby]

So you have more than enough to start building........:blink:

[Xcesive8]

Im confused?
You have all the hardware to mount to the transom, but your going to wait until you recieve your electrical components?:confused2:
Drill some holes already!:popcorn2:

[Alfa Spirit]

The Rapid will be on the water first

93064

[Alfa Spirit]

Hi,

I don't know what kind of servo choosing for the 50'' FOUNTAIN. Is a 15kg necessary? Please give me your advice, thanks


If a 15kg servo is not too powerful, I can have a good deal on this model.

http://img805.imageshack.us/img805/156/temp781.jpg

[twissted]

Should be fine. so is that what your waiting on?

[Alfa Spirit]

I buy this servo on a french forum, it is new.

I ask myself (?) if 3/16" flex shafts will be strong enough... 10S for each 4092-930kV, 3000 Watts continuous

Thanks

[Rumdog]

Yup. Plenty strong.
Go drill some holes.

[twissted]

I run these shafts in my 41" zonda with motors that are almost this size, and as long as they are one piece shafts you should be fine.

[Heaving Earth]

Do you have any pictures of 3/16 flexcables? Hard to give you advise without any pics....

[Alfa Spirit]

A super-macro, the flex come from Prestwich Models http://www.prestwich.ndirect.co.uk/


93417


http://img12.imageshack.us/img12/7056/zpowerboatp12.jpg

[lenny]

They look great,
When is one of them boats hitting the water. :popcorn2:

[Alfa Spirit]

The answer is in the reply #41 Lenny.

The gold flexshaft on the left looks stronger, do you know the brand?

Thanks

[Alfa Spirit]

93438

[KillerDave]

I just got two flexes from Octura that look the same, Is that what you have?
I've used Octura forever and always will. Not worried about one breaking at all.... Until it happens!!!

[Rumdog]

Dude... Come on.

[lenny]

Ok post 41, :lol:

what year will that be ?:noidea:

[Heaving Earth]

Hey, where did my post go?!? It was very informative....
Go figure

[Mattwarner]

I just want to see one hole drilled or something mounted.....please!!

[iridebikes247]

Don't hold your breath, something tells me this boat won't ever be built. Its a shame this thing would look great on the water and its a cool setup.

[tlandauer]

OK, forget about when the boat will be build for a moment, I got questions with the appearance of the cables, if they are from the same maker, why do they look so different? I also had on that had a single darker strand spiraling thru out the length of the cable.
Also, if you look at the brazed part, the top one is kind of bumpy, I had ordered one too and it is even bumpier, guess the silver solder was not perfectly smoothed out , it is well made but would it affect balance?
BTW, if they are from different makers, I still want to learn, so I will be very grateful if someone cares to answer here, sorry to go away from topic for a moment.
Thanks,
Tim

[Rocstar]

OK, forget about when the boat will be build for a moment, I got questions with the appearance of the cables, if they are from the same maker, why do they look so different? I also had on that had a single darker strand spiraling thru out the length of the cable.
Also, if you look at the brazed part, the top one is kind of bumpy, I had ordered one too and it is even bumpier, guess the silver solder was not perfectly smoothed out , it is well made but would it affect balance?
BTW, if they are from different makers, I still want to learn, so I will be very grateful if someone cares to answer here, sorry to go away from topic for a moment.
Thanks,
Tim
I know with some wire rope manufactures they use a single strand of a different color to mark their ropes. Also some manufactures don't make right hand lay ropes is all sizes, so they could be from different places.

[tlandauer]

I know with some wire rope manufactures they use a single strand of a different color to mark their ropes. Also some manufactures don't make right hand lay ropes is all sizes, so they could be from different places.
Makes alot of sense,thanks Joel.

[iamandrew]

in my experience, any flex shafts that have been more "gold" on the outside, have been crapper, than the black ones

[axel]

anything new in thew meantime?

[Alfa Spirit]

Nothing, nada, niente, rien du tout!! :tt2: See by yourself


http://imageshack.us/a/img560/4403/gvj6.jpg

[Mulisha]

How come none of your profile picks of your boats show any hardware mounted anywhere in anything??

[tlandauer]

How come none of your profile picks of your boats show any hardware mounted anywhere in anything??
Many people have asked the same questions, some even weren't that friendly. I think Alfa Spirit doesn't mind to be teased, and to be honest, he has been very generous with all the teasing. :buttrock:I think the satisfaction for him is to see us getting crazy. lol... I love these hulls though, I don't care if he drills them or not!!!:laugh:
This is the first time that I have seen this boat with the transom showing!! And with masking tape no less! :w00t: so there is some progress!

[Fella1340]

Has anyone else taken the step and bought one of these hulls? I have emailed Alex (okey100@Gmail.com) to see
If they are still available. Does anyone know anything about the fellow? If he is the builder or just selling these?
I hope to hear something good as I may just buy one if they are still available! Jeff

[SSchevy98]

Good looking build man :buttrock:

[fjelling]

Isn't this the hull?
http://www.ebay.com/itm/Fiberglass-50-P1-boat-hull-rc-boat-/151081505560?pt=Radio_Control_Parts_Accessories&hash=item232d28d318

Would like to see one of them running...

[axel]

Yes fjelling
it is the hull
I ordered mine 6 weeks ago and it took 10 days and it was delivered to Germany .
Its top workmanship but the boat has no Gelcoatfinish and is a bit light weight.

Mine is in the laquering process momentarely

Greetings
Axel

104176104177104178104179

[fjelling]

Nice!
What is going to be your setup?

[axel]

Well it will be for sure a twin with 2 Outrunners
max 6S
no further decisions up yet

[Fella1340]

This is great to hear another member has bought this hull, would you recomeneed it?
I love the look of it and it seems it would be a great rough boat as well handle some speed
With the steps. The boat seems like it will fit my requirementsperfectly. Do you have abuild thread
going? I would love to see the boat progross and hear about any positive or negative aspects
With regards to the hull. Great job so far! Jeff

[axel]

Thanks Jeff
you have the same expectations as I have.
No i don´t have a thread over here.
It should be my Winter project but its taking now its own way .
Normally Paint is the last thing!:olleyes:

Take care
Axel

[fjelling]

A lot of off topic here now, but the tread just became usefull so I guess it's ok:)

I would like to try a bigger single in it, any suggestions?

[Fella1340]

If you can try and start a build thread once you get really going in the winter. Inquiring minds want to know!!!

[Fella1340]

I am pretty sure I am going to get this hull. I have all the hardware, electrics etc. The motor I will be using
is a TP power 5660 (5692)6y 820kv. Running 10-12s. Some people have commented it may be to small, others
Have said it will work well. I have seen the videos to back up this motor though and it seems 60+MPH are obtainable.
The proof will be getting a boat together! As this will be a winter project I won't know for sure till the spring!
I have great confidence this will work well. A lot of guys are saying the tp5850 is a real great motor. I have seen only
one in a video and it looked really good.

[axel]

So i just openend a new building thred

[fjelling]

Cool!
Is the proteus motor here on OSE maybe enough?

[Fella1340]

Glad to hear you are starting a building thread! As for the Proteus motor I think it would work well. I would defiantly
Wait for the more experiences builders to chime in. Its one thing for it to work on paper but unless you have
Actually done it and have that experience what works on paper might not be worth a s--t.

[Fella1340]

Hi Alfa, I am very instrested in your build. More so than some others as I plan on buying the hull.
I was waiting for a promised refund on the original hull I bought for this project, it hasn't came and
the Guy thinks its going to go away by not reading emails. I will be posting pictures of the hull next week
Asking for advice on repairing or trashing the hull. I got a little sidetracked there, back onto topic. Where did you
Get the scale decals for the boat? There very nice and I am wondering if they are available and in different colors.
As well did you happen to notice if the hull is wet joined all the way around? Or are the e just strips of fiberglass
Here and there with some type of glue in between? I have been told the hull is a very light layup from another member
on here and will require reinforcin. Do you feel it will need reinforcing with the setup you are using?
Basically I am looking for a straight boat that has been joined all the way around with fiberglass (top and bottom deck)
And a hatch that sits in place reasonably flat. I can work around anything else, I just can't afford to end up with I have sitting
here again. I understand it is not gelcoated. Any ideas on what they have used to finish over the fiberglass. I apologize
for all the questions. My last buy has limited my options for the moment until I get that fellow straightened out I am on a tight
budget. Lesson #1486, wait to you have hull in hand before you spend over $1000 on motor,esc, hardware, batteries
Etc. He seemed such a stand up guy and I am still confused as to what happened. I am truly starting to
Believe I wasn't meant to have a big electric boat! It's only since I found OSE that has the things have started
To work out as they should have. I think this hull will satisfy my need for it to be able to handle rough water ans hopefully
perform OK on the flat water days. I really like the shape of the hull, for the price is really does have style and nice lines.
Your feedback will be appreciated Alfa! Sorry to bust up your build thread the way I have, I just don't know another way
Of going about it. Thanks, Jeff

[siberianhusky]

LOL this isn't much of a build thread, he never built the boat, just spent over a year putting stickers on it.....
And posting pictures of the hardware next to the boat....

[stelerzman]

I call Bullsh!t, I hate it when someone starts a build thread and then backs out or doesn't finish it. Worst case scenario, post the reason for the lack of progress.

[Fella1340]

I was doing some other searching to see if I could find the boat for sale elsewhere and I did. The okey
100 guy selling the boats on eBay had a website as well. I think the boats are being painted up, having
The motors/escs and such places in them and then being used a "photo" boats for the listings. One listing
plainly had no hardware on the back at all but it appeared in side shots when you couldn't see how it was
attached. Strangest thing. I didn't write the email down but if you search 50"fountain ed boat you will come across
it. Perhaps the stuff is left properly unmounted until a customer order is made? I didn't see the boat Alfa has here on
It but it appears both of them are dressing up boats for? Photo shoots? Strange that neither of them had a finished
Boat but okey100 is selling them as completed boats. May be a way to keep costs down on hardware etc? Weird.

[axel]

can´t find the site

Axel

[stelerzman]

:cursing: X2

[Alfa Spirit]

Hi, I didn' t work on this boat. Fjelling, run a twin setup for stability, no torque effects. 2 x 8S to 2 x 12S is the good voltage range for this 130cm long deep vee
MXZ have all propellers size left + right, Octura 457 is a good size. The hull must be reinforced with light carbon layers.
In France a guy built his own deep vee from A to Z, 147cm long.

https://lh4.googleusercontent.com/-9w9heahlBrM/Uhh_KvNlmhI/AAAAAAAAA9g/C9-c905z-Wc/s800/profil%2520DYTIX%2520147%2520rd.jpg

Setup: 2 x TP power 4092 980Kv,2 x 8S

http://www.offshore-rc.com/forum/uploads/post-3209-0-65114600-1348506548.jpg

On rhe FOUTAIN P1 I run 2 x SUXFLY 4092 930kV and 4 x 5S , those motors are Leopard

[Fella1340]

I spent the last 45 minutes trying to.find it again. No luck. I don't know what I did differently in the
search last time. It was one of those basic mobile type sites. I will look again when I have some time.
Jeff

[Alfa Spirit]

I have FOUNTAIN stickers and JPG files for this offshore if you are interested


http://imageshack.us/a/img834/4793/d7b9.jpg

[fjelling]

If you are not going to finnish it, would you sell the boat and hardware?

[Alfa Spirit]

No, thanks

[Fella1340]

Hi Alfa, I am definatly interested in the decals, are they vinyl? If you could let me know the price it would
Be much appreciated, you can pm me if you like. I am ordering the boat this week and need to decide on
my paint scheme. I think the colours will work the the way they are though. Thanks, jeff

[jetnfast]

Wow, awesome hull, so this build sounds like it died out?

[Doby]

Don't think it ever actually started...

[Alfa Spirit]

All the stickers are outside quality, if you received the pictures you can see. I have ILMOR, Twindisc and others. Size is the same on mine


http://imageshack.us/a/img209/9127/zpowerboatp14.jpg

[Fella1340]

Hi Alfa, I have ordered the boat. I am very interested in the stickers and JPEG files. Just let me know
How you would like to do this. Thanks Jeff

[axel]

Congrats Jeff
so we will have two build threads one single and one twin.
We will get a lot of comparism.
I only feel sorry that we can´t ride them together in spring.

Axel

[Fella1340]

It should be pretty cool seeing the different ideas coming together on the same hull. I have already added
What may turn out to be a major headache and possibly as disappointment to the build. Although I am
Confident I will be able to work through the issues. I ordered the remote adjustable trim tabs and the remote
adjustable stinger drive from kintec. I just couldn't resist. The trim tabs have been calling to me for months
Now and seeing a servo adjustable stinger on the market as well I wasn't strong enough to resist the temptation.
I have heard nothing but bad things about going this route. You can't this, and that won't work because...
Strangely though I haven't found anybody that has personally used them. So what the heck! Why not?
I had already purchased a dual rudder drive setup with a strut built in, a really nicely built piece. I was going
to use a carbon fiber tube running into the hull so I could benefit from using a strut versus a stinger. Now I have
to get rid of the strut idea and incorporate the servo adjustable stinger into the dual rudder setup. Its going to
be a lot of work sorting it all out! The servo adjustable trim tabs should be easy enough to work out
but the servo adjustable stinger is a whole different animal. It works off a small Cam type design.
I don't see a 1/4 scale servo being able to hold it in position hough based on the current setup
So I will have to work in a better mechanical advantage so the servo won't need to work as hard
to hold position.
Well, having said that it will likely be the the same issues to overcome with the trim tabs. Most people have
Said its a waste of time and not necessary and so on. I will be doing most of my running on lake Ontario though
and there's rarely a day when conditions are ideal to run any type of speed. I just think it will be cool, I enjoy building as
much as I do running and am looking forward to the challenge. Sink or swim on it, time will tell. I can't wait to
try out! I may need to lengthen the stinger. Its around 4 1/2"taller long, do you think that's to short on a 50"
Boat? I am also wondering where the trim tabs would be best positioned. Inboard closest to the stinger
or outboard and have have regular trim tabs next to the stinger. I was thinking of doing twin sets, adjustable
Inboard and outboard but I only have four channels to use! It also sounded like a recipe for.disaster or atleast
A lot of frustration. I don't know if I mentioned what I am running but its going to be a TP power 5692 820kv
6wye motor running between 8-12s. Starting at 8s and working my way up. I am using a SF 300300a amp esc.
The winding of the motor gives a maximum amp.draw of 156amps. TP suggested using a esc over 200 amps so
I am not sure what that means? Using a castle bec that is god to 12s (maybe 14s, can't remember). I have been
told its not enough motor by many and others have said it will work good. I will find out when it hits the water!
Sorry ALFA for complety hijacking your thread but seeing as though we are all building the same thing I hope you
don't mind! I am hoping you are going to get going on your boat to! I would love to.see you complete a boat! You
can do it! Curious as to what you have decided to run Alex and any other plans you have for the boat.
Hopefully we can sure some ideas and save ourselves so frustration. My boat will not be making any speed records
in the build time department. Having back surgery in January so it really it's limits on how much I can do. It leaves
A ton of time for planning though. (Hence the adjustable stinger and trim tabs!) Came jeff

[axel]

Wow Jeff thats a long to do list.
Trimm tabs we used 20years back servo without arm and endpoints to use just the motor to drive the longerd axle/shaft with a spindel.
For me stinger schould be 4.8 long.
All the best healthwise.
Axel

[Alfa Spirit]

Tell me if you want the stickers.

I have JPG files for the FOUNTAIN

[Fella1340]

Thanks for recommending the hull Alfa, I got mine today. I can't believe how well its finished. There's not
A spot on the boat that needs work (other the the filling the vent holes). The hull needs some stiffening up
with carbon fiber but this is very impressive! I really could sent it straight to paint! The hard part will be keeping it nice on the outside while I do all the work. Glad I bought this one and it showed up at the door in less than 10 days packed very very well! Thanks for finding this one Alfa!

[Fella1340]

Hi Alfa, I am interested in the JPEG files for the decals. Let me know what needs to happen to make
this work. I will need to be changing the colors once I settle on paint. You wouldn't happen to have
The file for the word fountain with the fountain crest in the middle of it would you? I don't know if that even makes sense. I really want to have the fountain crest as a major part of the theme for my boat. I suppose I just need to find someone who makes this stuff. Hows the build coming Alfa? What's happening over there in Paris?

[Alfa Spirit]

Hello my friend,

I didn' t find the Fountain font, I bought the Fountain logos on EBay, I mean Fountain, Powerboats and logos, I didn' t use all the stickers, I have a set (x2) of FOUNTAIN + POWERBOATS Silver color, a set of POWERBOATS Blue color, a set of 1st 4 BOATS.COM Blue color, two sets of Fountain logo Yellow color and Blue color.

Other stickers are made with pdf files and printed by a pro. Here are the files:

106506

106507


http://imageshack.us/a/img707/7957/yyce.jpg


Here is what I have for instance, the servo is a 15Kg, I made caps bank, flex shafts are 1/4" steped to 3/16". The rudder is made by Arrow Shark a very nice and strong part.
I found those very cool trimtabs on EBay. I need two ESC may be Hobby Wing Seaking 130A HV ...$$$$

The setup is: 4092 motors 930kV, 10S batteries, 34000 RPM unload

http://imageshack.us/a/img854/7851/dn3d.jpg

http://imageshack.us/a/img541/3144/hw1a.jpg

http://imageshack.us/a/img849/93/rj6d.jpg

[Alfa Spirit]

How to block the openings on the deck and cockpit? I have no idea, thanks

[Fella1340]

Hey Alfa, thanks for posting the decals. I will try and find the fountain logos on ebay as well. I wont be using to many decals and the paint scheme will be something different altogether. Once I have nailed down the colour scheme I will figure out what shiny stuff I will put on it then. The real work has to happen before I really bother with all that. How are things going? Have you got anything mounted or any holes drilled. Come on Alfa, lets see you make the plunge. Get the drill and dremel and lets see something happen. Surely there isn't anymore planning to do. What you got there looks fantastic, get inside the boat! I have to admit I find it strange you giving out all this advice to people and telling them how things should or could be done and I haven't seen you do anything other than buying parts and shining up the outside of the boat. Whats up with that? Have you not got a workshop to get things done it? Lets here whats going on!

[Wetter]

This boat looks very nice:cool2:

[Fella1340]

Hi Alfa, what's going on with the build, seriously? It seems you have no intention of finishing
It. Its been close to a year. I was really looking forward to seeing all that nice stuff mounted. You
had tape on the transom of the boat. I thought you were ready to go. Seriously, what's going on. I would like to see you suceed here. What's up? Don't overthink things, just layout and drill. You must know somebody to that you could work together with to get this rolling. I still have faith you can do it, I just don't understand why things get to this point and stop suddenly. Lots of people here willing to help. All you have to do is ask. Jeff

[ECSURFER84]

I want that boat!!!!!!


I would go for the red stripes but it still looks great as it is... I see you have some red tape there, stick it on one side, stand back and see what YOU feel????
I would paint it as the water will peel vinyl off.
Heat looking boat you have!

[ECSURFER84]

Where do you get that hull from?