Swap Meet Leftovers

[tiqueman]

As the title states, we (West Fl Model Boat Club) had our 2nd anual swap meet today. Ive got a few items left... a lot of things, actually most, are new and only taken out for pics. Some were left in original sealed bags.
Prices include shipping to Lower 48.

First group we have
1. 2 Proboat 45A escs. Both used less than 5 times. $40.00 each shipped
2. Proboat programmer, new unopened SOLD VAVSCT

Second group
1. V-1 Fightercat 1717 mount $35.00 shipped
2. New in box Castle 1520. SOLD LOVE6S

Third group
1. Fightercat 2028 mount. New in package SOLD SRISLASH
2. Fightercat carbon ESC tray. (See last pic) $27.00 shipped

Fourth group
1. Proboat cooling cans. one has a few scratches SOLD 2 MONOJEFF ONE SOLD CAVSCT
2. Leopard cooling can, measures 40Dx50L SOLD MAMBA2200
3. TFL small rudder. Bracket 4" long, rud 3.5" top to bottom SOLD BASSTRONIC
4. Inline strut rudder. SOLD LOCALLY
5. 110 stingers new inpackage SOLD LOVE6S
6. L and R Graupner props SOLD CAVSCT
7. Integy rx box. No screws SOLD CAVSCT
8. Small 4mm strut SOLD BASSTRONIC

Paypal only, gift payments will be refunded, Only PMs that will be answered is for paypal info. Please play by the rules and make all posts here.
Thanks

[srislash]

2028 for 4"or 5" rails?

[tiqueman]

Good question... stand by...

[tiqueman]

5". But you have a Komodo to finish so... you dont need it :laugh:

[tagasagwan]

Are those 110 stingers 3/16? Where can I get counter rotating flex cables for twin? I'm thinking about those for my Super Over due Skunk2.:frusty: I still have the twin 10XL i got from you last year but I don't have the L&R X42's anymore.

[tiqueman]

Yes they are 3/16. Sorry, i shoulda put that in there.

I think kintec has rights in stock. OSE carries them but last I checked they were out.

[tiqueman]

The shafts that are in them are for square drive. I pull those out, install the existing drivedog on the new 3/16 flex stub shaft end and slide them in the stinger. So the sq drive it comes w/ goes into a box and is never looked at again. :laugh:

[tagasagwan]

Do you happen to have cables lying around? lols! oH! btw, are those HOR's or FC stingers?

[tiqueman]

Ive got a left that I think I can spare, but no rights. Ill have to double check that though

Fightercat stingers. Both made by the same mfg though

[LOVE6S]

I will take the stingers if still for sale.

[tiqueman]

See this is where lol.... I think tags is trying to put a little package together. Am I unfair to give him first dibs... OR, Loves... (PS Rays ald Cheetah is wicked cool (your avatar)) Ive got another set, but they are opened and had been mounted. No or not all screws and I cant remember if both have the hard shafts. Let me pull them out. And I can probably find screws here to make it almost complete again.

[Basstronics]

Would you do $25 for the TFL rudder and 4mm strut?

parcel post should be reasonable shipping. No hurry either.

[tiqueman]

I will take the stingers if still for sale.

Ive got another set and can make it complete so if you want a set your in

[tiqueman]

Would you do $25 for the TFL rudder and 4mm strut?

parcel post should be reasonable shipping. No hurry either.

Yes, no problem.

[srislash]

5". But you have a Komodo to finish so... you dont need it :laugh:Hey!!!I am on final assembly and a free day tommorrow.May get a maiden in. So the 2028 mount will be good for my Scarab.

[tiqueman]

If its got 5" rails, Si

[LOVE6S]

Rays old cheetah is mine now, and its cool too.

[tiqueman]

Yeah I know.. I was just letting readers know what I was talking about. I still cant believe he sold it... hes in our club.

[maddmatt]

$125 for the 1520

[LOVE6S]

Ive got another set and can make it complete so if you want a set your in Have been run, or just mounted?

[tiqueman]

Nah ill hold 150 for now. Its brand new... or at least, never used. NOS

[tiqueman]

Loves, Since you posted youll take it first ill send you the unopened ones

[LOVE6S]

Loves, Since you posted youll take it first ill send you the unopened onesOK, pm me your pay pal.

[tiqueman]

OK, pm me your pay pal.

Info sent

[LOVE6S]

Would you take 180.00 for the motor and stingers?

[srislash]

If its got 5" rails, SiPerfect then.I'll shoot you a PP in a day or two.K?

[tiqueman]

Would you take 180.00 for the motor and stingers?

Meet me in the middle at 190?

[LOVE6S]

Meet me in the middle at 190? OK sending payment Money sent.

[srislash]

Perfect then.I'll shoot you a PP in a day or two.K?It'll work fine,paypal on the way.

[tiqueman]

OK sending payment Money sent.

Got it Shawn, thank you. itll go out tomorrow w/ tracking.


It'll work fine,paypal on the way.

You too Shawn....

[tagasagwan]

Scott, I need a complete set. It doesn't need to be Bnew. i'm looking at a complete set cheap! lols! As long as you think it's useable for my skunk and cheap, I'm good!

[tiqueman]

Ill make it complete. Ill get back to you asap

[tiqueman]

Would you do $25 for the TFL rudder and 4mm strut?

parcel post should be reasonable shipping. No hurry either.

Got payment. Boxed and ready to ship. ill send tracking info when shipped.
Thanks

[tagasagwan]

No hurry bro! My skunk has been sitting in her box for over a year anyway! Lols! I'm just slowly gathering the parts. At least the hardware and drive sets. before I start building her. Electronics can come later. Thanks bro!

[tiqueman]

Scott, I need a complete set. It doesn't need to be Bnew. i'm looking at a complete set cheap! lols! As long as you think it's useable for my skunk and cheap, I'm good!

Tags, send me your mailing address so I can double check the shipping tomorrow. I think last time I sent you something you had a relative in California or something that I sent it to?

[MAMBA2200]

i will take the leopard motor cooler send me your paypal thanks

[tiqueman]

i will take the leopard motor cooler send me your paypal thanks

Info sent

[MAMBA2200]

Thanks and will do

Sent from my DROID RAZR using Tapatalk 2

[MAMBA2200]

money is sent please send tracking thank you

[tiqueman]

money is sent please send tracking thank you

Got payment Scott. Thank you and I will as soon as I ship it later today.

[tiqueman]

Love6S, Bass and Mamba, items shipped. Updating Paypal tracking now....

Thanks again

[monojeff]

Do the proboat cans come with gaskets?
If so I might be interested.

[tiqueman]

yes sir

[monojeff]

Consider the proboat cans sold/trade

[tiqueman]

Consider the proboat cans sold/trade

You got it

[tiqueman]

Jeff, how far out are you to do a set?

And more importantly, why does MONOJEFF have a hydro in his Avatar? :confused2:

[Basstronics]

Arrived as described (of course!). Thanks!

[tiqueman]

Awesome! Thanks for the update

[gyrotron]

Hello Tiqueman,

I would take the Fightercat carbon ESC tray if it can fit a Castle Hydra 240A. Please confirm.

Thank you,

[tiqueman]

I can measure it for you when I get home. I don't run castle escs so I can't test fit one.

[tiqueman]

The inside clear dim top to bottom is 1". total width is a little over 3.5" and length is just under 8"

[gyrotron]

The inside clear dim top to bottom is 1". total width is a little over 3.5" and length is just under 8"
Tiqueman,

These are the dimensions of the ESC I need it to fit:
Size: 3.9" L x 1.6" W x 1.6"H
L and W dims are fine clear height is short. Is there a way to mod the height?

[tiqueman]

You could make taller spacers

[srislash]

You could make taller spacersI would assume it would be as easy as adding spacers such as these http://www.mcmaster.com/#binding-posts/=ka5doi
My local hardware store has them individually.Just need to check thread size.Mmm :spy:

[mtbenjamin77]

can you give me the dimensions for the FC ESC trays?

[cavsct]

Just checking- are all the proboat cooling cans gone? Was'nt sure. I was going to get a couple of other things, decided to wait untill you confirmed either way.
Thanks

Greg

[tiqueman]

can you give me the dimensions for the FC ESC trays?
Post 51


Just checking- are all the proboat cooling cans gone? Was'nt sure. I was going to get a couple of other things, decided to wait untill you confirmed either way.
Thanks

Greg

Still have em Greg. Cant get an answer from Jeff. Ive got about 3 more anyway not listed.

[MAMBA2200]

Got the leopard motor cooler today thanks buddy

Sent from my DROID RAZR using Tapatalk 2

[cavsct]

Could you do 40.00 shipped for the Programmer, One Proboat Cooling can, The pair of Props And the RX box?

Greg

[tiqueman]

Could you do 40.00 shipped for the Programmer, One Proboat Cooling can, The pair of Props And the RX box?

Greg

Ill do $50.00 shipped w/ tracking

[tiqueman]

Got the leopard motor cooler today thanks buddy

Sent from my DROID RAZR using Tapatalk 2

Awesome your welcome. And Thank you :beerchug:

[monojeff]

Jeff, how far out are you to do a set?

And more importantly, why does MONOJEFF have a hydro in his Avatar? :confused2:

I am going to size things up this weekend for you and hope to make them with my other oders this week.
if anyone else wants the cans I really only need 1 but more then that would be great also.

As for the hydro that is my Vintage 1/10th scale.
When I first started RC boats my first ever build was a mono so I made it monojeff at the time.

[tiqueman]

Cool I was just givin you a hard time about the avatar. Ive got to send the build out the first week of Dec so if you can make it thatd be great, if not, nop biggie, Ill go with my original plan. Ive got more cans not listed so more than one is not an issue.....

[monojeff]

Cool I was just givin you a hard time about the avatar. Ive got to send the build out the first week of Dec so if you can make it thatd be great, if not, nop biggie, Ill go with my original plan. Ive got more cans not listed so more than one is not an issue.....

Tell you what if you dont hear from me before tomorrow night then shoot me a message and get me going!
No worries I am the 1 Jeff after all 1 and only version of me.... :cool2:

I will take 2 of the cans and we can sort out the details of the decals when I size them up and chat then.

[tiqueman]

Tell you what if you dont hear from me before tomorrow night then shoot me a message and get me going!
No worries I am the 1 Jeff after all 1 and only version of me.... :cool2:

I will take 2 of the cans and we can sort out the details of the decals when I size them up and chat then.

Sounds good Jeff thank you

[gyrotron]

You could make taller spacers
Tiqueman,

I'll take the Fightercat carbon ESC trays for $25 shipped if you agree.

[tiqueman]

Tiqueman,

I'll take the Fightercat carbon ESC trays for $25 shipped if you agree.

Im going to stay firm w/ $27.00 on that. sorry

[cavsct]

Paypal sent

Thanks

Greg

[tiqueman]

Paypal sent

Thanks

Greg

Yup got it a while ago Greg from Ken. I replied to him, its boxed up and will ship out Monday am. Ill update his Pp w/ tracking as well as PM you when it goes out.
Thanks
Scott

[cavsct]

All parts arrived.

Thanks for everything.

Greg

[tiqueman]

Awesome Greg. thank you.