Gimp
11-13-2012, 08:38 PM
This Brute was made by Madscrambler to compete in TTC (placed 2nd). It's tube work on the rear Is welded to a scx10 chassis. The 3/16 tube bumper in the front is bolted on with a super clean approach angle. This rig is built to take a beating. Has full interior, metal boat sides, CMS, and panhard bar. Purpose built and extremely capable. The rear bed is lined with aluminum for added strength. Rig is fully waterproofed.
Built to kill in Class 2 and has a spectacular COG
Water Proof BR-XL
Hitec 7954SH
45T motor
32p 11/56 gearing
Axial axles and trans
RR solid trans output/gear (steal)
OD and UD gears
Modified drive cups (cvd steering angles and strength)
1.9 Pro10 wheels with VP hexes
1.9 Iroks with cut lugs
CI dual stage foams
Aluminum Chubs
Aluminum hi steer knuckles
LED lighting
MIP shafts
MG200 roof rack
Traxxas water proof rx box
Wheel wells
Full size spare
All scale accessories
I’m sure I’m forgetting something
As of right now, according to my local club’s tech-in, this is a 52 point rig. Easy addition would be a driver/passenger.
Only issue - 2 of the VP hubs have one broken screw head (one front and one rear). So 2 wheels only have 5 screws instead of 6 in the hubs. Doesn't affect anything and it can easily be removed, I just haven't had time.
Have a few spare parts I can throw in.
$615 shipped/tracked/insured
I can add in a Spek rx, charger, and 4 4s 1600mah batteries for an extra charge.
Build thread - http://www.rccrawler.com/forum/1-9-scale-rigs/403004-gimps-class-2-killer.html
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0669-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0670-1.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0671-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0674-1.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0673-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/user7205_pic38780_1352338094.jpg
Built to kill in Class 2 and has a spectacular COG
Water Proof BR-XL
Hitec 7954SH
45T motor
32p 11/56 gearing
Axial axles and trans
RR solid trans output/gear (steal)
OD and UD gears
Modified drive cups (cvd steering angles and strength)
1.9 Pro10 wheels with VP hexes
1.9 Iroks with cut lugs
CI dual stage foams
Aluminum Chubs
Aluminum hi steer knuckles
LED lighting
MIP shafts
MG200 roof rack
Traxxas water proof rx box
Wheel wells
Full size spare
All scale accessories
I’m sure I’m forgetting something
As of right now, according to my local club’s tech-in, this is a 52 point rig. Easy addition would be a driver/passenger.
Only issue - 2 of the VP hubs have one broken screw head (one front and one rear). So 2 wheels only have 5 screws instead of 6 in the hubs. Doesn't affect anything and it can easily be removed, I just haven't had time.
Have a few spare parts I can throw in.
$615 shipped/tracked/insured
I can add in a Spek rx, charger, and 4 4s 1600mah batteries for an extra charge.
Build thread - http://www.rccrawler.com/forum/1-9-scale-rigs/403004-gimps-class-2-killer.html
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0669-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0670-1.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0671-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0674-1.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/IMG_0673-2.jpg
http://i7.photobucket.com/albums/y253/NovaMan69/user7205_pic38780_1352338094.jpg