PDA

View Full Version : F/S Stock MG and everything to upgrade it.



Jason4636
09-24-2012, 07:59 PM
I have a Miss Geico that is all stock, but I changed out all the connectors to 5.5mm and it has a X-445 prop. It does have a small hair line crack where the hull joins together, on the right hand side about 2" long towards the rear. Plus the factory hatch pin in the front was epoxied back in place by the previous owner. Pic's below.


Here's what all if for sale. All these price's are what you would pay for new part. But I'll ship them for free.
Miss Geico - $250
Leopard 4082 2200kv with 40x40mm w/j - $75 (new)
CF 4074/4082 motor mount (New) - $25
MG upgraded flex cable (New) - $25
Hobbywing Seaking 180a esc (used with 8-10 runs on it on 4s) - $80
MG fiberglass hatch (New) - $40
Polished 4074 water jacket (new) - $13
Traxxas 2056 Watterproof servo (New) $28
Standard machined aluminum servo mount (New) $10
X-642 (New) $13
M-445 (New) $13
CF and Kevlar fabric orange and black 2 sheets 16x24 (New) $40
CF and Kevlar fabric orange and black 1 sheet 12x16 (New) $10
Plus a spare flex cable

Everything adds up to $622.00. I'll sell it as a bundle for $550 shipped. U.S. state side shipping only for this price.

I'm open to trades. Looking for a FC Cheetah hull, or a DF 45" sniper hull, DF 41" mono hull
8508485085850868508785088

Jason4636
09-24-2012, 08:00 PM
More pics
8508985090850918509285093

Jason4636
09-24-2012, 08:02 PM
85094850958509685097

darrin4800
09-24-2012, 08:12 PM
I would like the servo mount and the 12 x 16 kevlar sheet if you split ti up.

Jason4636
09-24-2012, 08:24 PM
I'm going to let it run for tonight as a package deal. Unless I can get offers on most of the stuff. Then I'll split it up.

Darren your first in line on the CF an servo mount.

slowornge50
09-24-2012, 08:52 PM
I would take the leopard 4082 and the mount, if you decide to seperate.

Jason4636
09-24-2012, 08:59 PM
I would be take the leopard 4082 and the mount, if you decide to seperate.
Your first in line if I seperate

darrin4800
09-24-2012, 09:23 PM
I am in for the servo mount and kevlar if you do spit it up.

Jason4636
09-24-2012, 09:34 PM
I am in for the servo mount and kevlar if you do spit it up.
Sounds good, I'll let you know if I seperate

megalops
09-25-2012, 07:02 AM
I'll take the Fiberglass hatch if split up