Epv 135 nypd rtr 1300$

[ManuelW]

Hello Guys,

today I'm offering a RTR boat from a friend of mine. Its his EPV 135 with a NYPD paint job.

The hull is glass but very very strong laminated. The paint job looks basically fine but don't expect quality as from the Airbrushalley or Oversprayer. Building itself was done pretty good, the interior has a nice layout, check the pictures.

So:
-hull: EPV 135 GFK
-size: 54" (same class as MHZ Mystic 1380 and HPR 135)
-design: NYPD
-hardware: MTC rudder and modified drives
-motors: 2x Leopard 5698
-ESC: 2 Swordfish 240A
-driveline: 4.75mm flex shafts w. collet couplers
-Emcotec Killswitch
-DS 9500 digital servo

The boat comes ARTR, missing the lipos and a set of suitable props (eg Octura 450/3).

Price: $1300 + shipping (worldwide possible, UPS, FedEx,...)

For the rest check the pictures.

regards,
Manuel

8465184652846538465484655

[ManuelW]

and here 3 additional pictures:
846568465784658

[Make-a-Wake]

:drool:

[lenny]

Very cool,:tiphat:
What s cell can it run on ?

[ManuelW]

My recommendation would be 2x 9S, so 9S for each motor and props from X450/3 to X457.

regards,
Manuel

[lenny]

:tiphat:

Hey I forgot to ask what kv are the motors,
And what speeds do you think with this setup on two 8s 35c 3800mah cells,
And how much run time do you think ?

[ManuelW]

Hello,

I'm pretty sure they have 1100kv (5698/3D) but I'll ask. On 8S each and props around Octura X450/3 speeds between 75-80mph should be possible. I do only think that 35C 3800mAh cells might be a little small, I'd recommend to use 5000mAh 40C cells.

Runtime with the 3800mAh definitely short, maybe 3min??

And for the rest:
Price drop: 1200$ + shipping

regards,
Manuel

[ManuelW]

Okay just got the confirmation, 5698 with 1100kv

regards,
Manuel

[Mel279]

this boat similar to the fastest cat in the world...run average 211kmh with topspeed 225kmh according to Timo

http://www.youtube.com/watch?v=WSVPdp5UXCo

[Pwb201]

Who makes the EPV hull guys? Never heard before

[ManuelW]

EPV was a former company in germany producing powerboats, they were known for their Joker Design cats like EPV 135, EPV 160 and EPV 185 (73" !!) as well as some monos including the CESA 1882 with almost 100".
But as far as I know they ran out of money and most of the moulds and rights were bought from another company. So these hulls are rare and out of production for quite some time.

regards,
Manuel

[Pwb201]

Thanx Manuel, as always your answers are filled with more info and as helpful as possible. Btw there is some gent in the " want to buy " thread looking for HPR hulls and who to contact for them I recommend your name I hope you don't mind..
Phil B

[Hotrods]

I would like to see pictures of the bottom if that is possible? Also where is it being shipped from?