Racing/Sport Equip for Sale (Neu, Castle and Swordfish)

[thomaslambo]

Racing/Sport Equipment for Sale (Included; USPS Priority Mail shipping with Confirmation for all orders inside USA). Insurance, is your cost if wanted.

International orders; shipping and insurance is not included, if interested I will estimate the shipping/insurance cost to you upon request.

Neu Motors (8 units in total)

1 Used - Neu 1415 1.5D (2700kv) motor with cooling jacket……………. $125.00

1 New - Neu 1515 .5Y (4400kv) motor (competition wind)….…….....….. SOLD

1 New - Neu 1515 .5Y (4400kv) motor (competition wind)….….…….….. SOLD

1 Used - Neu 1515 1D (4100kv) motor (comp. wind) with jacket…..... SOLD

1 Used - Neu 1521 1D (2900kv) motor (comp. wind) with jacket…..…. SOLD

1 Used - Neu 1527 1.5D (1500kv) motor (8mm shaft) with jacket.……. SOLD

1 Used - Neu 1527 .5Y (2500kv) motor (comp. wind, 8mm shaft).….... SOLD

1 Used - Neu 1527 .5Y (2500kv) motor (comp. wind, 8mm shaft)....…. SOLD


Castle Motors (5 units in total):

1 New - Castle 2028 (780kv), (8mm shaft) with cooling jacket……..……. SOLD

1 New - Castle 1717 (1580kv) motor with cooling jacket……………………. SOLD

1 New - Castle 1717 (1580kv) motor with cooling jacket……………………. SOLD

1 Used - Castle 1518 (1800kv) motor with cooling jacket…..............…. SOLD

1 Used - Castle 1518 (1800kv) motor with cooling jacket…...…..……….. SOLD


Leopard Motors (2 units in total)

1 Used - Leopard Nemesis Gold 4082 (2200kv) motor (cooling jacket add $10.00)……….……. SOLD

1 Used - Leopard Nemesis Gold 4082 (2200kv) motor (cooling jacket add $10.00)……….……. SOLD



Note; all used motor’s are in excellent condition, most with less than 5-10 minutes total running time. All have 5mm shafts unless otherwise noted. All shafts (except brand new motors) have been flat spotted for coupler set screw. No wires have been short cut.


Swordfish Controllers - 240HV 4-12s Lipo (3 units in total):

1 - 240A HV ESC, reconditioned by factory, includes Etti HV ESC Cap bank….............…….. SOLD

1 - 240A HV ESC, reconditioned by factory, includes Etti HV ESC Cap bank…..............……..SOLD

1 - 240A HV ESC, reconditioned by factory, includes Etti HV ESC Cap bank…................….. SOLD


Note; these controllers have less than 5 minute’s usage and some were damaged as a result of failing to follow the setup sequence (instruction manual). All units were factory reconditioned/re-certified and have not been used following that process. All items come with Etti HV caps and spark arrestor. All controllers have 5.5mm CC connectors on bat side and 6.5 CC connectors on motor side.

[RaceMechaniX]

My goodness you are a certified Neu hoarder!

[thomaslambo]

Hey Tyler,

You bet, and it's time to move some of the inventory I'm not planning on using in the near future :)

[worriedsick4u]

I'll take the castle 2028 and a Swordfish. Paypal info please.

[Raydee]

Man I read your list very slowly looking for a 1527 1.5Y in there ;)

[thomaslambo]

Sorry, no 1.5Y.

[thomaslambo]

I'll take the castle 2028 and a Swordfish. Paypal info please.

Very good, PM with info will be sent ASAP.

Thanks,

Thomas

[Brushless55]

Thomas, I'll take a SF 240HV ESC
thanks
also would you take $175 for a NEU 1527 .5Y ?

[thomaslambo]

Thomas, I'll take a SF 240HV ESC
thanks
also would you take $175 for a NEU 1527 .5Y ?

SF ESC sale pending

Regarding the 1527:

Can't take $175.00 on the 1527 .5Y motors as they are comp wind and cost $325.00 new. These particular motors (running in a dual motor Cat) have had only 2 passes in the last Legg Lake 16th mile SAW event (maybe 60 seconds running time), so almost new :)

[Brushless55]

SF ESC sale pending

Regarding the 1527:

Can't take $175.00 on the 1527 .5Y motors as they are comp wind and cost $325.00 new. These particular motors (running in a dual motor Cat) have had only 2 passes in the last Legg Lake 16th mile SAW event (maybe 60 seconds running time), so almost new :)

understood..
how did your SAW run go with them?
thanks

[icelert]

I will take one of your swordfish esc's

thanks

[ironjaws]

next in line on the 2028

[thomaslambo]

next in line on the 2028

Noted

[thomaslambo]

I will take one of your swordfish esc's

thanks

Sale Pending

[thomaslambo]

understood..
how did your SAW run go with them?
thanks

I'll let the motor go for $200.00 if you're still interested?

[lectriglide]

I'll take a 1717 and 1518 Thomas.

[thomaslambo]

I'll take a 1717 and 1518 Thomas.

Thanks, Sale Pending on both

[lectriglide]

Thanks, Sale Pending on both
Funds sent!

[kitekook]

You mentioned Leopard gold motors?

[jamie]

I will take one of the 1527 .5Y s for $200 plus shipping to Australia if you can do it thanks

[thomaslambo]

I will take one of the 1527 .5Y s for $200 plus shipping to Australia if you can do it thanks

Thanks, Sale Pending, yes I can ship to Australia....I'll get you shipping costs ASAP

[jamie]

Thank you and can you pm paypal details please :)

[thomaslambo]

You mentioned Leopard gold motors?
Yes, they are Nemesis Gold motors 4082 2200kv, similar to a 1521 Neu in size and performance. They have one run on both motors in a Q Class Offshore Cat which hit just under 90MPH. They are almost new, and I have now posted them for sale. I'm asking $75.00ea, and with cooling jacket add $10.00 (Total $85.00).

[jamie]

Payment sent to your paypal thank you sir.

[leybold12]

I am interested in the Neu 1527-1.5D. PM sent.
D

[ringo650r]

I will take the castle 1717 and the 1518 please send paypal info thanks.

[thomaslambo]

I am interested in the Neu 1527-1.5D. PM sent.
D
Yes, still available, would you like me to flag it as Sale Pending?

[thomaslambo]

I will take the castle 1717 and the 1518 please send paypal info thanks.
Thanks, Sale Pending, will send Paypal info via PM

[ringo650r]

I will take both the castle 1717 and 1518 I am also interested in the two leopard 2200 would you do 120 on the pair? I can pay right away.

[thomaslambo]

I will take both the castle 1717 and 1518 I am also interested in the two leopard 2200 would you do 120 on the pair? I can pay right away.

So sorry I missed your offer on the Leopard motors, yes I will take $120.00. Send funds and I will ship all four motors together on Monday.

[boddenboys4]

How much for the 2 New 1515s 4400 kv? looking to buy both, any idea if one will fit in the Lynx hull?

[thomaslambo]

How much for the 2 New 1515s 4400 kv? looking to buy both, any idea if one will fit in the Lynx hull?
Retail price on these motors is $240.00 ea ($480.00 total) without shipping, which I will include in the price below.

I'll give you both motors for $350.00 ($40.00 discount for buying both).

I believe the 1515 will fit your Lynx, but you need to confirm that.

Let me know if you're interested?

Thomas

[boddenboys4]

If you can hold them until Friday I will take them both

[thomaslambo]

If you can hold them until Friday I will take them both
No problem, Sale Pending.

[boddenboys4]

Thanks

[boddenboys4]

Just wondering, if I took all 3 of the 1515s what would the price be?

[thomaslambo]

Just wondering, if I took all 3 of the 1515s what would the price be?
I'll knock off $30.00 on the third motor, so $145.

[boddenboys4]

I will take all 3 of them

[thomaslambo]

I will take all 3 of them
Ok, 1515 1D Sale Pending

Thanks

[lectriglide]

Received my motors yesterday safe and very well packaged. Thank you!

[thomaslambo]

Received my motors yesterday safe and very well packaged. Thank you!
Good show...have fun

[boddenboys4]

Its $495 total right? What's your pay pal?

[thomaslambo]

Its $495 total right? What's your pay pal?

Yes, Paypal info sent via PM.

Thanks

[boddenboys4]

Funds sent

[jamie]

Hi I will purchase the 1527 1.5D with jacket if it is still available thank you sir.

[thomaslambo]

Hi I will purchase the 1527 1.5D with jacket if it is still available thank you sir.
Yes, motor is still available.

Sale Pending, I believe you have my Paypal info, if not let me know?

Thanks,

THomas

[jamie]

Can you send it to me again sorry Thanks

[kingwrench]

Tom is the 1527 .5y still avail?

[thomaslambo]

Tom is the 1527 .5y still avail?
Yes, the motor is available.

[kingwrench]

Tom I will Take it.


Yes, the motor is available.

[thomaslambo]

Tom I will Take it.
Sale Pending, I will PM Paypal info.

Thanks,

Thomas

[kingwrench]

PayPal sent. Thanks.


Sale Pending, I will PM Paypal info.

Thanks,

Thomas

[HTVboats]

I'll take the 1521 1D if it is a 5mm shaft. PM sent for details.
Mic

[thomaslambo]

I'll take the 1521 1D if it is a 5mm shaft. PM sent for details.
Mic

Hi Mic,

Yes, it is 5mm....Sale Pending

I will PM info for payment

Thanks,

Thomas

[kingwrench]

Received the NEU 1527 thanks Boyd,, looks good as NEU.
Sale Pending, I will PM Paypal info.

Thanks,

Thomas

[thomaslambo]

Received the NEU 1527 thanks Boyd,, looks good as NEU.
The motor probably has less than 5 minutes running time on it. In fact, all the equipment I sold is almost as good as "Neu" :smile:

[HTVboats]

Double checking here as sometimes things get crossed up. My son Jay sent funds via paypal. Did you recieve?
Mic

[thomaslambo]

Double checking here as sometimes things get crossed up. My son Jay sent funds via paypal. Did you recieve?
Mic
Hi Mic,

Looks like my PM didn't make it to you yesterday due to my mailbox being full.

Yes, Paypal funds were received, package shipped yesterday and your son should have gotten an e-mail with USPS shipping info in it. Have him check his e-mail and let me know. Also, I sent another PM with USPS shipping confirmation number.

Thanks,

Thomas