FighterCat 16s-300a controller

[HTVboats]

16S-300amp FC (no BEC) Got this about a year ago direct from Ben replacing an 8S that didn't work. Don't need this large a controller in my tunnels. Consider trade for Neu/Castle 1515-1520's 1600-2500kv
$140 shipped lower 48.
Mic
8380383802

[Brushless55]

I'll take it..
would you want a New Leopard 4082 2000kv in partial trade?
thanks

[HTVboats]

Sold pending payment
I have a 4082 Leopard already and looking more to upgrade to Neu. Anyway sending pm.
Mic

[HTVboats]

Brushless55 declined. I do not have or use paypal which is my choice from some friends negative experience. Personal checks work as well as MO's. Controller still for sale.
Mic

[thomaslambo]

I have a Castle 1518 1Y 1800kv motor I might consider trading. If you're interested, I need more info on your controller?

[runzwithsizorz]

My current build I predict will have spikes of 220amps, and maybe more. Would like the headroom your esc provides. Have a brand new unused FC 16s 200amp, and a used SF 200lv.
Trade, and/or ?? Why the replacement shrink wrap??? How much use?? In what?? Is this the esc that was pretty much DOA from the beginning?

[HTVboats]

Thomas, sorry I have a 1900kv 1520 already.

Runswithsizors
Todd I would be interested in a trade & say $60 on your SF 200. As for shrink wrap it is just the way I got it from Ben as he replaced a 8s-300 that had bad solder joints. Never had the FC logo stuff on it. I have run it in two races and maybe 6 test sesions all on 6S pushing a 1521 Castle. Works fine but just not in a smaller tunnel.
Mic

[Basstronics]

I will take it if I can pay you on the 19th?

My boat budget is shot this paycheck. Could really use this too, please :)

[runzwithsizorz]

Thomas, sorry I have a 1900kv 1520 already.

Runswithsizors
Todd I would be interested in a trade & say $60 on your SF 200. As for shrink wrap it is just the way I got it from Ben as he replaced a 8s-300 that had bad solder joints. Never had the FC logo stuff on it. I have run it in two races and maybe 6 test sesions all on 6S pushing a 1521 Castle. Works fine but just not in a smaller tunnel.
Mic
How bout, the Swordfish 200amp, and a $55 USPS Mo and we call it a deal??? Do you need a cap bank, and updated pics? Need to go on a couple of errands, be back later.
http://forums.offshoreelectrics.com/showthread.php?23503-Swordfish-200amp-esc&p=301338&highlight=#post301338
P.S. I NEVER used this!

[HTVboats]

How bout, the Swordfish 200amp, and a $55 USPS Mo and we call it a deal??? Do you need a cap bank, and updated pics? Need to go on a couple of errands, be back later.
http://forums.offshoreelectrics.com/showthread.php?23503-Swordfish-200amp-esc&p=301338&highlight=#post301338
P.S. I NEVER used this!

Sounds fair. Pm'ing details.

Sold pendind payment exchange.

[runzwithsizorz]

Sounds fair. Pm'ing details.

Sold pendind payment exchange.
PM received, We are good to go, will send out tomorrow. Not sure how just yet, USPS, or UPS? Does USPS offer tracking? If not perhaps UPS would be better. Does the UPS store sell money orders? (1 stop shop).
Also think I will add insurance, we have all heard the horror stories, and it's only a couple of bucks. Will PM later with personals. Just now confirmed, ALL connectors are 5.5mm. you may keep your 6.5mm's. I may,
or may not take the time to de-solder the motor bullets. Please tell me you are including ALL of the spark arrestor wiring??? You mentioned you were running 6s, you are aware that this is the upper limit of this
ESC, and that this is the first version with just a single cooling block, correct?? I have the UNUSED Etti cap bank, and programing card for the this Swordfish, are you interested in them??
Regarding your PM, and the "leap of faith", your statements are exactly what an honest man would say,(kudos to you).

[runzwithsizorz]

Could have this packaged, and on it's way to you today. Please confirm yes, or no on the cap bank,($20),and/or the program card,($5), and my spark arrestor question.

[HTVboats]

Thanks
I have programming cards and a laptop link plus cap banks, but thanks for offering. I will send USPS and your right a couple bucks extra insures. PM me your shipping address.
Mic

[runzwithsizorz]

Understood, PM sent. Going to order 2 spark arrestor kits today from Fighter Cat, should I make it 3 ????

[runzwithsizorz]

Your money, ESC, and Elvis have left the building. Thank ya, thank ya very mush.
USPS priority insured, earliest eta Wednesday.

[HTVboats]

ESC shipped USPS priority. There is a small female bullet negative lead on the esc and the male lead that came with it for a spark arrestor. I didn't use it but it would be easy to solder a resistor and a simple alligator clip to bridge to the negative (male) battery connector then remove as you made the bullet connection.
Mic

[runzwithsizorz]

Package arrived, and all seems in order. In yours pics, I did not see the male lead which contains the resistor. glad it's there now.
Thankz Todd

[HTVboats]

Recieved your package also. I forgot I had that lead. Not sure if it is a resistor so measure it with an ohmeter.
Mic

[runzwithsizorz]

Recieved your package also. I forgot I had that lead. Not sure if it is a resistor so measure it with an ohmeter.
Mic
You can see the outline of a resistor under the wire shrink. But since it is on the controller side, without peeling back the shrink there is no way of testing it. However, since it is stock from
Fightercat, one would assume it would be close to the correct ohm's. The resistor on my Fightercat 8s 200amp is on the battery side, and is 10.5 ohm's
I know you said that you didn't use a spark arrestor, but I'll just leave these links here, in case you are interested. Cheers Todd

http://forums.offshoreelectrics.com/showthread.php?10487-Spark-Arrestor&highlight=Spark\%22%20Calculator

http://forums.offshoreelectrics.com/showthread.php?12102-M12-maritimo/page3

http://forums.offshoreelectrics.com/showthread.php?10487-Spark-Arrestor&highlight=Spark\%22%20Calculator