micro hardware questions

[Ctonez]

in the specs for the micro hardware it states the requirements as a .094 flex cable and 3mm shaft...
Steve, do you carry these cables, or is there another option?
I'd prefer 1/8 shaft if I can work it...ya' know, for prop choices and easy prop swaps.

[Steven Vaccaro]

I just listed it will the flex cables. A 1/8" shaft may work but you would have to make a bushing to fit it, in the strut.
http://www.offshoreelectrics.com/proddetail.php?prod=mcr-mhfs&cat=70

[Ctonez]

that was funny...I thought I missed it previously. I was gonna apologize for my overlooking it...thanks for being the best customer service guy in any industry I've ever dealt with!

[Steven Vaccaro]

You didnt miss it. I forgot to list it :frusty: and did when you reminded me.

[Ctonez]

what about a coupler for that cable? will the 1/8 to 4mm with the grub screws work?

[Steven Vaccaro]

any of the .098 couplers will work. Octura .098 cable is also really only .094

[JimClark]

Steve are the blue micro rudders the same size as the 3" Octura's you have?

Jim