View Full Version : SV27 Strut and Rudder on SH?
boater76
05-02-2007, 06:29 AM
I was thinking of using the sv27 strut and rudder on my 40" SH knock off. I am going to use 700sc and Jeti 600 and 14 cells. Anyone think this would be a good application or would I need something different. Thanks.
Ken
ReddyWatts
05-02-2007, 07:26 AM
It should work ok. Probably run in the 20's.
boater76
05-03-2007, 06:08 PM
When a rudder is offset instead of inline does the boat turn differently? I have never dealt with offset rudders.
Ken
saleens7
05-03-2007, 06:21 PM
well, if its offset to the right, it turns right just a tad better, but you also get more speed because the prop wash isnt blocked and it also somewhat counters the effect of prop walk...
boater76
05-03-2007, 06:22 PM
Ohhh I get it. I should have thought about that.
Ken
Steven Vaccaro
05-04-2007, 09:37 AM
That's a really large boat for that rudder. Make sure when you mount it you can get atleast 1" of rudder below the prop centerline.
boater76
05-05-2007, 12:23 PM
What's the minimum you think I should go with?
Ken
Steven Vaccaro
05-05-2007, 01:21 PM
It really depends on the size of the transom and where it would be mounted.
The transom on that boats very tall. You will have to mount that rudder low in order for it to get a good bite.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.