PDA

View Full Version : Feigao 380 motors



Steven Vaccaro
05-18-2008, 08:15 AM
http://www.offshoreelectrics.com/proddetail.php?prod=fei-380-s

SJFE
05-18-2008, 10:02 AM
Well done Sir:rockon2: Can we look foward to the 380XL?

Steven Vaccaro
05-18-2008, 03:26 PM
380 XL's are so close in weight to 540 S motors that I think they may over lap. But I could be wrong.

SJFE
05-18-2008, 03:51 PM
I wish I had tested the set I had longer. I wanted to see of the longer rotor would produce more torque than the S @ the same weight and kv.

marker
05-18-2008, 07:00 PM
The 380xl and the 540s both produce 23.7 oz inch of torque
Mark

Steven Vaccaro
05-18-2008, 08:34 PM
The 380xl and the 540s both produce 23.7 oz inch of torque
Mark

Mark am I correct that they overlap? Looking at the numbers it didn't make sense to sell both.

SJFE
05-18-2008, 08:52 PM
Where are those numbers posted? I'd like to reference that chart in the future.

marker
05-20-2008, 10:42 PM
Steven
Yes the 380XL and the 540s do the same job, it just depends if you can fit a long and thin or a short and fat motor in the boat.

To get the torque figures you need to calculate them from the maker's data sheet or measure the electrical characteristics of the motor.

380S =13.3 inch oz
380L =18.5
380xl=23.7

540s = 23.7
540L = 31.8
540XL=51.1

SV 27 = 32.5
pro boat = 32.4

Mark

Teerayoot
07-23-2008, 12:21 PM
I have this one too,but still problem finding watter cooling and mouting ,
Anyone suggest me item on offshoreelectric website??? or on ebay.
:) I plan to install on my mini hydro.