Seaking & tacon 4074 - 2150 KV motor timing question

[ratchet]

First of all, this forum has helped me a lot, as this is my first FE boat. So thanks to all for sharing your knowledge.

I put together a R2 Hobbies godspeed cat, with a seaking 180 ESC & a Tacon (same as leopard 4074) - 2150 KV motor. It is powerd by 2 7.4 v batteries in series (Turnigy 5000s 45-90 Cs)

Before I go out I was curious as to what a good starting point for the timing would be. I'm starting out with the Graupner 42 dia x 59 pitch (similar to the X442) and I have a 45 x 63P (similar to the M445).

I put a lot of work into stuffing all of this in the hull & I do not want it to go poof as soon as I pull the trigger:Praying:

Which prop would be the bests to start with & what timing should I start at (I read a lot & think maybe 15 is a bit much ?)

Thanks,
Mike

[stadiumyamaha]

Start with low timing and the smaller prop. Check temps and move up from there.

[ratchet]

looks like my options are 0, 3.75, 7.5, 11.25 15 (default setting), and 18.75, 22.5 & 26.25
Thanks Stadi........


Would starting at 7.5 be safe, or should I go lower ?

How do I know if I'll need more timing ?

[stadiumyamaha]

7.5 to 11.25 should be fine. I've never noticed a huge difference after raising the time, may be a mph or two but isn't worth the damage it may cause IMO.