RIPFENCE
04-28-2012, 07:33 PM
Up for sale is a barely used rico mono..this is the small rough water mono to have..the boat has one scratch on it from transporting and hitting against another turn fin..besides that i had to seal around the drive with some "oil seal" silicone to prevent water from getting in the hull..now it runs pretty dry..now for the good stuff below
boat has a stinger drive by mtc hardware cost around 125.00 (it adjusts really nice and can go further up or down then anything else out there)
powered by a plettenburg 350/50/a1s 1350 kv awesome on 6s low 50's and real nice on 7s 60mph these are 460.00 new super smooth operation and integrated water cooling built into the case
fightercat 300 amp 6s esc and programming box included
has the recommended accuride long trim tabs and china turn fins
speedmaster rudder
hitec 7954sh servo
3/16 flex cable,5mm to 3/16 collet
peter zicha motor mount with esc mounting plate
components and parts have less then 8 runs on it and has never been dunked or crashed..
Asking 500.00 shipped to continental us via usps insured
note the prop is not included in this listing7534475345753467534875349
boat has a stinger drive by mtc hardware cost around 125.00 (it adjusts really nice and can go further up or down then anything else out there)
powered by a plettenburg 350/50/a1s 1350 kv awesome on 6s low 50's and real nice on 7s 60mph these are 460.00 new super smooth operation and integrated water cooling built into the case
fightercat 300 amp 6s esc and programming box included
has the recommended accuride long trim tabs and china turn fins
speedmaster rudder
hitec 7954sh servo
3/16 flex cable,5mm to 3/16 collet
peter zicha motor mount with esc mounting plate
components and parts have less then 8 runs on it and has never been dunked or crashed..
Asking 500.00 shipped to continental us via usps insured
note the prop is not included in this listing7534475345753467534875349