Wanted, 14"-16" mono

[wamf]

Prefer wood. I just don't have what it takes to build one and the plastic boats don't do it for me. I am interested in a boat or just the hull/deck.
MikeV

[fastbaltek]

anything specific? if you got the plans i can cut it for ya for a price.

[fastbaltek]

laser cut it*** haha

[wamf]

anything specific? if you got the plans i can cut it for ya for a price.
Yeah...a 14-16" hull, not parts.
MikeV

[fastbaltek]

i can cut it and put it together, ill charge material costs and shipping and little bit of labor...

if you HAVE the plans...

[wamf]

I don't have any plans. What I'm thinking I want is a little offshore deepV A cross between a mini rio and a mini v I want it to handle waves but be stable. Will run bl and don't need to go faster than 20mph.
MikeV

[Dr. Jet]

I have some MHZ Geckos (13" I think) that handle rough water well and absolutely rip with a $26 Chinese motor/ESC combo on a $20 1350mah 2S LiPo. I think they are great and highly recommend them. Just to make this post clear, I have no plans to sell either of my Geckos, they're just too much fun. Rather my intent in this post is to recommend them if the Mini-V and the Mini-Rio don't have what you seek.

The one-piece fiberglass hull comes with the rudder, stuffing tube, driveshaft and motor mount installed for somewhere around $145 if I recall. Not cheap, but still a good deal considering the completeness of the bare hull and hardware. 'Glass work on the hull is excellent. A couple of hours of work could have you on the water.

[SJFE]

The MHZ mini Fountain is another boat to consider then.

[Rex R]

something like this perhaps? http://www.rcgroups.com/forums/showthread.php?t=854832 hth
rex

[wamf]

No, That is 18" long and I already have a dumas deepv 10 that is a much nicer looking boat. I want smaller/lighter to run a 380 bl motor.
Thanks
MikeV

[fastbaltek]

Hey you have an email! :) i need to know asap what is going to happen wood order is being placed tomorrow first thing in the morning.

[wamf]

Hey you have an email! :) i need to know asap what is going to happen wood order is being placed tomorrow first thing in the morning.

Thanks, you have been very helpful.
MikeV

[wamf]

i can cut it and put it together, ill charge material costs and shipping and little bit of labor...

if you HAVE the plans...

I received the drawn plans and laser cut wood today. Very nice work. I will probably ask you to do more in the future. I think it's funny you live only a few miles from me.
Thank You very much.
MikeV

[fastbaltek]

that means shipping will be quick! haha.