PDA

View Full Version : 4074 2000kv fitted with pics



jamespl
04-13-2012, 11:03 AM
74350743517435274353
I got tiered of not having a regular mount to interchange motors and the torque roll was annoying so I decided to fit a turnigy XK-4074 2000kv motor. I have one in my genesis and it really moves, I had this motor already so I might swap it for the 3674 2200kv version as I prob won't be able to put a 45mm prop on the p1

tlandauer
04-14-2012, 01:41 AM
Wow, That's great! I wish I hadn't put extra layers of FG to reinforce the hull, will have a hard time removing the clamp. I like this solution and Lenny's off-set rudder.

jamespl
04-14-2012, 03:14 AM
I tested it yesterday. Is so much better to drive IMO. It's faster but I need to prop up, still got the x640 on there at the mo. I had to cut about 4mm off the bottom of the mount sides to get it to level out.
Here is the vid http://www.youtube.com/watch?v=2b-_zgBIzvA

Joe007
04-18-2012, 04:16 PM
Nice video, can't wait to get mine together.

jamespl
04-18-2012, 04:20 PM
It didnt seem to rn as well in that vid as when i tested it a day or 2 before, i think its because where the vid was taken there is always a little chop so it was bouncing.