Power supplies 12v or 24v plug and play

[JRPLANE]

12volt 47 amp 564 watt,
24volt 47 amp 1130 watt.
I am using two in series for 24v on my lab 8, they are very stable, rock solid,
They are set up ready to go with 4mm outlets and power cords.

Heres a close up of the bussiness end of the power supply.
You can see the 24v model is wrapped in black, comes with jumper to allow 24V. as you can see you can use 2-12v and 1-24v at the same time. 2-12v top row , 24v bottom row, or remove the jumper and you have 4-12v outlets. With the jumper in place you also can use the out two far out side connections for two 24V outputs. These power supplies are rated at 47 amps. I have personally abused my test setup, just to see where the fail point is. I have had my Lab 8 with 6-5000 3S @ full 40 amp charge and a cellpro 10 with 2-5S running wide open. I'm still using this power supply with no problem. Just because I did this for testing purposes,,,,,,,,,
I DO NOT RECOMMEND GOING OVER RATED OUTPUT!!!

Singles are 12v and white $55 shipped

Doubles are 12v and 24v and black $110 shipped

These are 100% ready to use. Plug and play

I will ship out of the US,

Check out the thread on RCG
http://www.rcgroups.com/forums/showthread.php?t=1612434

I have sold many there!

[JRPLANE]

Just a few more pics
73099

73100
73101
73102

[Clueless1]

Do you have any 24v power supplies available?

[JRPLANE]

Yes sir ready to ship

[Clueless1]

Any recalls yet? ;-) I'll pay pal you and provide shipping info in the morning.

Thanks,

Todd

[JRPLANE]

No recalls at all , these things were made to run 24/7-365, the way we rc'ers use them they should last two life times.

Just paypal jrplane@hotmail.com, i can ship it in the mourning

[Chrisg81983]

They come with power cord I am interested in getting a double what have you ran with a single unit

[Anbjorn]

Hi,
I can not see it mentioned here. What is the input voltage and frequency?
110/60Hz or 230/50Hz?
Maybe interested in two 24V units that I can parallel into + 90A @ 24V
Anbjørn

Anbjørn

[JRPLANE]

Yes they come with a power cord. Look up in the ad, I use a double with a lab 8 all the time.

Here is the link to RCG with feedback from the people there,
http://www.rcgroups.com/forums/showthread.php?t=1612434

[JRPLANE]

Anbjorn, I only sold one oversea's mostly because of the price of shipping.
The units say 110-240 volt, 50-60hz. Yes two 24volt units can run parallel for 24v@94amp.
The 24v i sent to the UK cost $60 to ship.

[Anbjorn]

Great,
Do you mind checking the shipping cost to Norway? Zip code 6065
What is the physical size and weight of two 24V units?
Anbjørn


Anbjorn, I only sold one oversea's mostly because of the price of shipping.
The units say 110-240 volt, 50-60hz. Yes two 24volt units can run parallel for 24v@94amp.
The 24v i sent to the UK cost $60 to ship.

[Chrisg81983]

I see only what you ran with a double unit I am curios what you have ran with a single unit just in case i want to split it up

[JRPLANE]

Anbjorn, looks like $74 extra to ship two 24v they weigh 9 lbs each

Chris, i have a friend run to cell pro 10's at the same time, he charges 4-5000/3s at a time. You have 47 amps to work with.

[JRPLANE]

Anbjorn, rechecking I can ship for aditional $55 not$74

[Clueless1]

Jrplane,

Money sent!

Thanks,
Todd

[Chrisg81983]

I will take a double but can you sell me another few pices of heat shrink two lives to do a single unit and one for a double so three total just in case I want to split it up or put back together

[JRPLANE]

I will take a double but can you sell me another few pices of heat shrink two lives to do a single unit and one for a double so three total just in case I want to split it up or put back together



Sure just add $5 for the shrink paypal. jrplane@hotmail.com

I can get it out today!

Thanks. Jeff

[Anbjorn]

Great,
Then I will take two 24V units.
Sending $275 by PayPal now.
Also you have a PM with complete delivery address.
Thanks
Anbjørn

Anbjorn, rechecking I can ship for aditional $55 not$74

[JRPLANE]

Anbjorn, check your email for USPS mail, they will send conformation number, Thanks Jeff

[RIPFENCE]

these are exactly what i need hope i get get one soon!!

[JRPLANE]

these are exactly what i need hope i get get one soon!!

Right now I have 4-12v or 2-24v left,

[HydroMike]

Not had a problem yet with mine works great 12 or 24 volt

[JRPLANE]

I was telling a couple of local guys how good the power supplies are, so they called my bluff. One guy said he would buy if he and his buddy could hook up to a 24v and charge there batteries. So I had one that didn't have the shrink on it, and it was only 65 degrees outside, they hooked 2 lab8's to it 8 lipo's (4each) turned both chargers up to 40 amps and let them run. Over the course of the day, they charged every battery that anyone would let them. One session my amp meter showed 59.9 amps for over 12 minutes. The power supply got warm to the touch but not hot.
I told them I would sacrifice the power supply, but if it survived one of them had to buy it.
I sold 3 that day!

I do not recommend doing this, but I've seen it with my own eyes, I believe they are very underated. They are rated for 47 amps lets try to keep it there!

[raptor347]

Jeff,
If you have a 12V left I'll take it.

[voepel]

Jeff I will take 1-24v. Steve

[JRPLANE]

Jeff I will take 1-24v. Steve

It has shipped!

[Chrisg81983]

Jeff let me know if you got the money

[G.Rose]

Guys we purchased 2 of these packs. They are fantastic and a GREAT BUY.

[Chrisg81983]

Jeff all I half to say is wow guys this is a great supply I just plugged mine in about an half hour ago and when ran in series it will run whatever I throw at it I bought a track power supply from tower for around 90 dollars and it can't do a tenth of what this thing can run if you need a power supply this is the one no doubt about it plus jeff was great to deal with sent me everything I requestedChris g

[Derrick Davis]

Very interested in these supplies but I'm a bit ignorant in this area. Question for JRPLANE...although anyone that feels sorry for me can speak up. Is it correct that 1 12v supply will power a dual or quad battery charger with enough juice to charge between 2A to 5A? For example - would 1 supply be enough to run the Imax dual 400wX2 charger that Hobbypartz is advertising for $150.00?
Thanks for your patience. :confused: :o

[JRPLANE]

Double D,

I looked up the Imax charger, I think the 12v power supply will handle this charger with no problem.
The Imax is out of stock, check out progressive rc, they are reputable.

[Clueless1]

JRPLANE,

A little delay due to being out of town, but I recieved the awesome 24V power supply! Nice job:thumbup1:

Thanks,
Todd

[JRPLANE]

sent you a pm, paypal $55 to jrplane@hotmail.com
I will get it out immediately
Thanks Jeff

[TINY]

I'll take a 24volt wrapped unit.. Can you post to aus.. zip 4575 pm me
Cheers justin

[Anbjorn]

Got mine today.
Looks good.
Thanks
Anbjørn

[snellemin]

These supplies are good. Don't know how well or what method is used too isolate the 24V combo that is being sold here, but I can say I have my own Powerlab setup charging eight 6s 5000mah in parallel. PSU's dont' break a sweat. Some PSU's can go up to 50A before shutting down.

http://i189.photobucket.com/albums/z240/snellemin/Powerlab8/DSC05752.jpg
http://i189.photobucket.com/albums/z240/snellemin/Powerlab8/DSC01752.jpg

[JRPLANE]

My power supplies have the DC ground floated, this means you have the AC and case ground still in tact. There are many others being sold that simply cut the AC ground, this works but if power goes to ground and you touch the case you can get shocked!!!

[snellemin]

Good to hear.

[TINY]

Money sent.. Thanks mate

[JRPLANE]

Tiny

Please send me your name and address exactly the way it should appear on the package.
It's a little different than ours.
Thanks Jeff. Jrplane@hotmail.com or PM.

[oscarel]

I just got one of the 24v setups from Jeff as well and the do work well, quiet compared to the ones I was using.

[JRPLANE]

Hey guys this is what I did with my power supplies, if you look close you can see it hidding under the Lab8.
Show off how you are using them!!

7516275163

[properchopper]

Could you post the dimensions of the single 12V unit plz ? Have one in stock ?

Thanks,

Tony

[Brushless55]

I have the 12V and it does a great job
I would get another for 24V but my darn charger can only take upto 18V

[Chrisg81983]

Mine measures 11.25 L 2.25 W 3.25 H hope this helps but double check with jeff if it is the same as I measured one unit that is in my double that I bought from him

[properchopper]

Thanks. Just need one to fit the toolbox for backup on test/tune days. For race dates with 3-4 chargers going, I lug along "Big Mama"

75303

[Chrisg81983]

Damn Tony you weren't kidding that thing is huge what is it from and specs on it
Thanks. Just need one to fit the toolbox for backup on test/tune days. For race dates with 3-4 chargers going, I lug along "Big Mama"75303

[JRPLANE]

Properchopper
Chris has the diamention right, and I do have a 12v readt to ship.
Just paypal jrplane@hotmail.com

Thanks Jeff

[weil0127]

Received mine today and it works great.

[JRPLANE]

Thanks Guys
Between Off Shore and RCG, I just sold number 100, you all are great!
Still have many left in 12 and 24 volt,

[voepel]

Jeff,

I have run mine a few times with no issues except why are the fans on all the time. I guess I am used to my Bulldog that has temperature sensor so the fan does not run unless under enough load, but would be nice to have this feature on yours.

Steve

[Chrisg81983]

On all of my power supplies they all at least have a single fan that runs constantly and some have a second that turns on by a temp sensor mine that i got from jeff here runs the same as all of my other and is a great unit one of the best I ever used especially for the money I paid excess of two hundred for some that don't work as well as Jeffs unit does and personally I like the fans on all the time cooler is better ans I believe Jeffs units are pretty much made to run 24-7 ( jeff correct me if I am wrong on that ) so they pretty much need constant cooling anyways Thanks chris g

[JRPLANE]

Chris you are right they are made to run 24/7 , I don't mind the fan noise, it reminds me I left it on.

[Chrisg81983]

I hear that it is a reminder for me as well

[JRPLANE]

I just put a few more together! They are ready to ship.

Jeff

[shrive81]

I will take a 12v power supply please pm me payment info it would be shipped to California 92223

Thanks

[Basstronics]

It wont do it.

These power supplies are rated 564 watts. That charger will do 400 watts charge and that doesnt factor in efficiency loss. If you are going to run that charger look for at least 800 watts. Preferably 1000 watts so you have some head room.

If you can settle for just the 400 watt charger then these would be perfect.

[JRPLANE]

What charger? Read the thread, decide for your self, I was charging 4-5300 3S @ 40 amps the charger only pulled 20.1 amps at 24volts
That don't even make them warm!

[HydroMike]

Hey buddy I have one of ur 24 volt set up I would like to see if u could set something like that up for me ? If so pm me a price please
Hey guys this is what I did with my power supplies, if you look close you can see it hidding under the Lab8.
Show off how you are using them!!

7516275163

[Basstronics]

What charger? Read the thread, decide for your self, I was charging 4-5300 3S @ 40 amps the charger only pulled 20.1 amps at 24volts
That don't even make them warm!

http://www.ebay.com/itm/power-supplies-12v-24v-power-your-charger-RC-/230793671406?pt=Radio_Control_Parts_Accessories&hash=item35bc5ff2ee

Per your auction & the tag on the HP power supply: 564 Watts.

The charger is two ports @ 400 watts EACH = 800 Watts.

Im not mathematician, but the numbers dont add up.

Not a knock on your product. Ive considered one but am a DIY'er as I want to add readout. Also my charger is slightly more tame at 400 watts.

[JRPLANE]

I no mathematician either, but I know what the FMA lab 8 reads out, when the charge screen show 40 amp out put the power supply input screen shows, 25.2 volts in at 20.1 amps, my buddy runs a FMA lab6 it show exactly the same thing. I have checked with an amp meter and the FMA is reading right on the money

If you read the fine print of most chargers the only way to get the ratings of the charger is to run 18-24 volts (depending on the charger).
None of them put out high watts at 12 volts.

Most chargers only charge 6S if you charge 6s (22.6 volt ) @40 amps that is 904 watts, well under the 24v -1130 watt rating, theres not many 40amp output chargers out there.

[Chrisg81983]

Basstronics I have this power supply and I thought the same thing with the wattage but for some reason that does not matter with this supply it can take whatever you throw at it I promise you won't find nothing that can come close to it for the money most of the time I only use the ps the 12v way ( single unit ) instead of using the double for 24v

[JRPLANE]

Thanks Chris, I have found they are bullet proof so far! The only way I have tripped the internal breaker is accidently shorting the outputs,

The ones I am using are the test supplies, they have been ubused, at 59 amps they get warm but still work! Thats 12 amps over rating. I don't reccommend doing this! But I think they are under rated from manufacture, but thats just my opinion. Anyway I have been abusing mine, so I know what to expect.
They rock!

Jeff

[Brushless55]

wish I could some how crank mine to 18v

[JRPLANE]

I have many left, can ship today!

[HydroMike]

Jeff thanks for the emails I'm starting to collect things now u think it be a good ideal to put an amp meter on it to

[JRPLANE]

Mike, When building a charger box the sky is the limit. I didn't put a amp meter in mine because the Lab8 shows the output amps of the power supply.

When you get it built post pics to show it off !!!!!

[JRPLANE]

Just put a few more together, ready to ship!

[TINY]

Hey jr, got mine.. Will they take 240volt? notice got the 110 lead....Should be ok, have run other similar items..

[JRPLANE]

Yes they will, i have sold a few to norway,germany, and england,

[TINY]

Yes they will, i have sold a few to norway,germany, and england,

F'n awesome mate!!!! Everyone needs one... wow super impressed.. Charged 2xhypo 6s at 10c for a test... Where were these 4 years ago..... thanks JR.. Top seller

[HydroMike]

Well I was just thinking they have more usages then just this one here ,we do a haunted trail and a lot of lighting and sounds works off of 12 volt so just to be sure that I'm not overly doing it ,just thought it would be good to put one on . Oh do u have the web sight for that case thanks again
Mike, When building a charger box the sky is the limit. I didn't put a amp meter in mine because the Lab8 shows the output amps of the power supply.

When you get it built post pics to show it off !!!!!

[JRPLANE]

I have no web site, i'm just a hobby guy, trying to offset his expense of playing.
Is there a forum you know of to list PS for this?

[TINY]

Yeah jump on ausrc.com.au Need to post 20 times I think before selling.. Big community..

[JRPLANE]

Just got a new batch put together!!!

[Derrick Davis]

JR, You replied to a question I had a couple months ago about using your supply on this charger http://www.hobbypartz.com/26p-ultimate800-charger.html
At the time, they were out of the charger. They are now back in stock.
I like that fact that this charger has dual displays for both batteries being charged (i know, it's a quirky hang up I have).
Can you please confirm one of your 12v supplies will handle this charger? The specs on the charger show 400 watts per side/port.
Thank you. :tiphat:
double dizzle

[JRPLANE]

In my opinion yes it will, with no problem.

[Derrick Davis]

Another thoroughly impressed recipient of a JRPLANE 12v power supply.
Ordered Friday afternoon (6/29) - check
Received communications of acknowledgement of order Friday eve - check
Seller (quickly) replied to my simple questions - check
Received supply today (7/2)- Quadruple check
Already tested....Impressed!
It's a bit unusal to get such expiditous service these days, let alone receiving good product. You deserve a :tiphat:
Nicely done JRPLANE and I thank you Sir!
:thumbup:

[bdp1174]

Another satisfied customer.Quick shipping and power supply tested with Hitec X2-400 2-Port Multicharger and works great.Gonna try more than 1c next time but with dual 5 amps charge rate power supply was perfect.
Here is the charger I ran it with.
http://www.hitecrcd.com/products/new-products/x2-400.html

Thanks again JRPLANE.....

[ThGdThBd&ThUgly]

Funds sent for 2 - 24V Power Supplies.

Thanks

[JRPLANE]

Sent at 7:00 am this mourning sent a PM with tracking
Thank you Jeff

[Emdev2]

Money sent for 1 -24volt power supply!

[JRPLANE]

Whoo Hoo!!!! 3 days from indiana to washington state. Thats got to be a record! ThGdThBd-amp-ThUgly bought a power supply on the 21st.
I shipped the same day, usps tracking show it delivered today the 24th. Lately USPS has done a great job. Let hope it last!!!

I have many power supplies left,
Jeff

[ThGdThBd&ThUgly]

Whoo Hoo!!!! 3 days from indiana to washington state. Thats got to be a record! ThGdThBd-amp-ThUgly bought a power supply on the 21st.
I shipped the same day, usps tracking show it delivered today the 24th. Lately USPS has done a great job. Let hope it last!!!

I have many power supplies left,
Jeff

Jeff,
Confirmed Delivered!
Thank You for supplying an Awesome product. Currently charging 12 lipo's with one 24v power supply and icharger.
Would recommend these to everyone. Smooth & Fast Communication, Shipping, & Delivery.
Thanks Sir!

[JRPLANE]

I just finished putting a few more together, they are ready to ship!!!!!!!!!

[carleverett711]

Hi i will take one if you still have them one of the Single 12v and white $55 shipped. I leave for work right now but will be home a 5pm to send you the money via pay pal thanks Everett

[JRPLANE]

Sent PM

[carleverett711]

Thanks Jeff for waiting just got home money sent

[JRPLANE]

I have plenty left!!!

[JRPLANE]

Many more availible!
Jeff

[JRPLANE]

I have a new batch ready to ship!!
Jeff

[lawdog]

Thanks for the quick shipping... 12 Volt ordered and shipped. Thanks!

[czegard]

Hi Jeff,
How much the overseas shipping for one 12v unit to Chile?

Sent from my GT-N7000 using Tapatalk 2

[JRPLANE]

Shipping will be $50 to chile thats usps

[czegard]

Shipping will be $50 to chile thats usps

Just doble checking, the input is 110/220volts?
Thanks.

Sent from my GT-N7000 using Tapatalk 2

[JRPLANE]

they will do either they are self switching

[czegard]

Payment sent!

Sent from my iPad using Tapatalk HD

[czegard]

I got my 12v unit, shipped to Chile.
Works perfect!

Thanks.


Sent from my iPad using Tapatalk HD

[JRPLANE]

Good deal Glad you like it. Thank you Jeff

[lewis6669]

Would like (1) 24 volt power supply.

Thanks

[JRPLANE]

sent you PM

[JRPLANE]

Hi guys, I have many more of these ready to go!!!

Jeff

[Chrisg81983]

Guys I bought a 24 volt setup from Jeff some time back and I will definitely say once again that it is awesome. It's still running strong and stays cool as heck while charging a pair of 6s 5000 man and a pain of 5s 5000 mah at 10 amps each and another single 6s 5000 mah on another charger at 15 amps. I am over specs but it still works flawlessly.

[Eric Ho]

How much for shipping to Singapore? I'm interested in the 24V setup.

[JRPLANE]

Medium flat rate if $59 USPS WOW!! It was $33. Thats not very cost effective.

[Eric Ho]

Wow, thanks, USPS rates have gone up quite a bit. Let me think about it.

[JRPLANE]

Eric , Please check it out, maybe I am not seeing it right, A 24v weigh less than 8 lbs boxes and ready to go. USPS is usually the cheapest.

[JRPLANE]

I have many ready to ship.

[rbsmith6]

I have a handicap stair climber that runs on 24v. It requires new batteries every year ($70) Would a 24V unit work and run a wire to the chair?

[JRPLANE]

I honestly have no idea

[G.Rose]

Well I purchased a couple almost 1 1/2 years ago and one finally gave up the ghost. I need another. Please PM me so I can get your PP and I will send you my address. Thanks
Gary

[ManuelW]

I bought four of them as a 2S2P unit for ~250USD, after a little more than 12 months three of them stopped working, one is still doing its job.

regards,
Manuel

[G.Rose]

I think it is my fault. I charge in the garage where there is a lot of dust. I took the unit apart and it was filled. I am going to figure a way to put a mesh screen where the fan is and do the same to my Hyperion chargers. One of the little fans on it is making noise. I think I will clean the inside of them also. They are expensive.