CT03 67" Electric / Swiss Build

[fuffi0]

Hi all

I am happy to present you here my new project.

CT03 67" Electric

Setup:
Motor - 2 x Leopard 5692/2y 1090kv
ESC - 2 x Hifei Swordfish 240hv
Battery - 2 x 10S Lipo
Props - 2 x Octura x450 or Octura x457

Thanks OSE for that perfect Service .....

Here are some pic's:

http://img412.imageshack.us/img412/910/img1254r.jpg

http://img7.imageshack.us/img7/4582/img1275dh.jpg

http://img585.imageshack.us/img585/1465/img1309zu.jpg

Antispark-Connector with 4.7Ohm 1W Resistor .... no more Sparking with 10S :-)
http://img252.imageshack.us/img252/9522/img1343y.jpg

http://img849.imageshack.us/img849/8028/img1352l.jpg

The interior fittings are nearly finished :-)
http://img441.imageshack.us/img441/3745/img1353dd.jpg

New photos of the design will follow .....

Regards from Switzerland
Philipp

[Make-a-Wake]

Beautiful boat! 10s seems like just a tad much for 1090kv motors though...................could be wrong.

[LarrysDrifter]

Its just a hair over 40,000 rpm. Twins can easily handle it. Should run good and be reliable. The black paint or gel will be hard to see though.

[fuffi0]

10S are perfect for these engines.
The Swiss model builders are sometimes a little crazy

No kidding .... This setup has been tested and worked perfectly ever
But I know that are 42000rpm much ..... but it works :-)
I hope it at least

The design is not finished yet.
The boat is still covered with green and white foil.

Philipp

[fuffi0]

and here are some pictures with Decals.
90% are "selfmade"

http://img41.imageshack.us/img41/3848/img1384pa.jpg

http://img593.imageshack.us/img593/5738/img1391k.jpg

http://img819.imageshack.us/img819/6956/img1392n.jpg

http://img263.imageshack.us/img263/5407/img1397qd.jpg

http://img641.imageshack.us/img641/1038/img1398xk.jpg

http://img441.imageshack.us/img441/3745/img1353dd.jpg

regards from switzerland
Philipp

[ManuelW]

Hello Philipp,

seems as I sold the hull absolutely to the right person! Great work, I like the decals!

Best regards,
Manuel

[fuffi0]

Hi Manuel

So it is ..... :-)
Thanks for your compliment.

regards
Philipp

[numse1964]

Beautiful :O)

[Drax21]

Looks fantastic, I look forward to the video of it running! The anti-spark connector with resistor is genius. What size connectors are you using?

[fuffi0]

Hi Drax21

I'm using 4mm connectors for antispark-plugs.
The resistor is a 4.7Ohm 1W.
No more sparking .....

regards
Philipp

[nata2run]

Its just a hair over 40,000 rpm. Twins can easily handle it. Should run good and be reliable. The black paint or gel will be hard to see though.
Very nice build!, I would worry a little about 40k revs. With Leo bearings. Maybe mid 30's is safer with larger props.

[Drax21]

Hi Drax21

I'm using 4mm connectors for antispark-plugs.
The resistor is a 4.7Ohm 1W.
No more sparking .....

regards
Philipp

So the actual connectors for batteries and escs are 5.5mm or bigger?

[fuffi0]

5.5mm Polymax