View Full Version : I sold my MHZ Fountain for a MMP Rapide
Alfa Spirit
01-08-2012, 11:25 PM
MMProducts make very good boats , they work for MHZ, Hydromarine and other brands. I bought a MMP Rapide, this hull is the same size than MHZ Fountain, all hardware, motor, etc . fit perfectly in the new hull. The Rapide is a very nice Outerlimits style This hull is very well made Here is a picture with the 2 hulls
http://img31.imageshack.us/img31/6429/racemaster13.jpg
megalops
01-09-2012, 12:48 AM
Wow those are nice! How long are they?
Alfa Spirit
01-09-2012, 01:54 AM
They are 1 meter long (39"),
Alfa Spirit
01-09-2012, 02:52 AM
The big brother MMP Watersnake is 1,40 meter long
http://img576.imageshack.us/img576/9996/temp68.jpg
srislash
01-09-2012, 09:13 AM
Damn!I was waiting for that Fountain to come up again Alpha.Wanting to do the same setup.What swayed the change?
megalops
01-09-2012, 10:59 AM
Hey Alpha where did the rudders come from? and how long are they?
Alfa Spirit
01-10-2012, 03:19 AM
@ srislash The MMP Rapid have a killer look and the hatch is larger, easier for access
@ megalops rudders come from ebay promise hobby I choosed this model because it' s possible to reverse one rudder for a symetric mount. Inlet water is high enough if they need to be cut
6BOOST
01-10-2012, 04:52 AM
So is that a MMP Rapid next to an MHZ Racemaster? And is the MHZ Racemaster actually made by MMP or are you saying they do the exact same hull, but they don't supply MHZ's Racemaster? I'm interested to know because they Racemaster I have is beautifully made, I don't see the sense in paying the middle man if MMP made it.
Also do you know if they do custom layups like carbon etc at an extra cost?
6BOOST
Alfa Spirit
01-10-2012, 05:33 AM
Some models are made by MMProducts in Tchécoslovaquie for MHZ , Hydromarine, Center Lorenz and other brands
Now they sell their own boats on the MMProducts website, english version is online. Those hulls are very good quality nice finish and they are strong , they do custom layups carbon-kevlar, carbon. The white RAPID version is available only with carbon-kevlar , I asked for this white Rapid hull fiberglass made, no problem and cheaper
Here is the english link http://www.mmproducts.cz/products/models/
Alfa Spirit
01-10-2012, 09:08 AM
This systeme can be installed on a MMP Rapid looks good, just replace the strut with a 3*/16''
http://www.horracing.com/product_info.php?products_id=167
http://img59.imageshack.us/img59/3287/temp63.jpg
srislash
01-10-2012, 09:21 AM
That is a sweet setup.Is there a breakaway on the rudder?
Alfa Spirit
01-19-2012, 03:13 PM
Here is the hull with its hardware, this boat don' t need flaps and turnfins. The motor is a CC1717 1580kV the Speedmaster strut from OSE is perfect with twin rudders and motor mount is made by Hervé http://www.mini-meca-rc.fr/ . Flexshaft is a Prestwich Model boats, I hope it' s strong enough This hull is awesome http://img210.imageshack.us/img210/640/waouw.gif http://img210.imageshack.us/img210/640/waouw.gif http://img210.imageshack.us/img210/640/waouw.gif
http://img843.imageshack.us/img843/3480/rapid.jpg
cugino
01-25-2012, 02:17 PM
That is a sweet setup.Is there a breakaway on the rudder?
Yes, there is. Boat belogns to my friend.
Alfa Spirit
02-08-2012, 02:37 AM
Here is a better picture of the hardware Speedmaster, 2 rudders, etc.. and the Castle Creations 1717 :banana:
http://img802.imageshack.us/img802/9278/racemaster102.jpg
Rumdog
02-08-2012, 01:36 PM
Why is it still in pieces?
Alfa Spirit
02-08-2012, 02:17 PM
Yes, I' building two other boats; I' ll try to build an OUTERLIMITS REPLICA with custom decals I made. For exemple
http://img856.imageshack.us/img856/5773/ztuning527.jpg
Rumdog
02-08-2012, 03:48 PM
Have you finished a boat yet?
RIPFENCE
02-08-2012, 03:51 PM
its abstract boat building..real nice parts though.. still wish i had seen the mhz hull go fast
battlefury
02-09-2012, 04:02 AM
what happened to the twin genesis with the pair of neu motors?
sunexim
02-10-2012, 03:13 AM
These looks very cool and charming in this white:thumbup1:
Hi, I see that you are interested in my rudder. I'm sending you a link from my building... http://www.modelarske-forum.cz/viewtopic.php?f=51&t=1075
70390
My Page www.djracing.cz
Espresso
03-06-2012, 10:51 AM
The big brother MMP Watersnake is 1,40 meter long
http://img576.imageshack.us/img576/9996/temp68.jpg
Awesome looking hull. Huge and very sleek design. Are these new and does anyone have a review? Any US suppliers?
Alfa Spirit
03-06-2012, 01:01 PM
Of course for USA contact Brian, his shop is ROCKET CITY RACING
http://www.rocketcityracing.com/Monos_c_88.html
He is a very serious dealer and have those beautiful mono hulls, BrianW on the forum
*
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.