I sold my MHZ Fountain for a MMP Rapide

[Alfa Spirit]

MMProducts make very good boats , they work for MHZ, Hydromarine and other brands. I bought a MMP Rapide, this hull is the same size than MHZ Fountain, all hardware, motor, etc . fit perfectly in the new hull. The Rapide is a very nice Outerlimits style This hull is very well made Here is a picture with the 2 hulls


http://img31.imageshack.us/img31/6429/racemaster13.jpg

[megalops]

Wow those are nice! How long are they?

[Alfa Spirit]

They are 1 meter long (39"),

[Alfa Spirit]

The big brother MMP Watersnake is 1,40 meter long



http://img576.imageshack.us/img576/9996/temp68.jpg

[srislash]

Damn!I was waiting for that Fountain to come up again Alpha.Wanting to do the same setup.What swayed the change?

[megalops]

Hey Alpha where did the rudders come from? and how long are they?

[Alfa Spirit]

@ srislash The MMP Rapid have a killer look and the hatch is larger, easier for access
@ megalops rudders come from ebay promise hobby I choosed this model because it' s possible to reverse one rudder for a symetric mount. Inlet water is high enough if they need to be cut

[6BOOST]

So is that a MMP Rapid next to an MHZ Racemaster? And is the MHZ Racemaster actually made by MMP or are you saying they do the exact same hull, but they don't supply MHZ's Racemaster? I'm interested to know because they Racemaster I have is beautifully made, I don't see the sense in paying the middle man if MMP made it.

Also do you know if they do custom layups like carbon etc at an extra cost?

6BOOST

[Alfa Spirit]

Some models are made by MMProducts in Tchécoslovaquie for MHZ , Hydromarine, Center Lorenz and other brands

Now they sell their own boats on the MMProducts website, english version is online. Those hulls are very good quality nice finish and they are strong , they do custom layups carbon-kevlar, carbon. The white RAPID version is available only with carbon-kevlar , I asked for this white Rapid hull fiberglass made, no problem and cheaper

Here is the english link http://www.mmproducts.cz/products/models/

[Alfa Spirit]

This systeme can be installed on a MMP Rapid looks good, just replace the strut with a 3*/16''

http://www.horracing.com/product_info.php?products_id=167

http://img59.imageshack.us/img59/3287/temp63.jpg

[srislash]

That is a sweet setup.Is there a breakaway on the rudder?

[Alfa Spirit]

Here is the hull with its hardware, this boat don' t need flaps and turnfins. The motor is a CC1717 1580kV the Speedmaster strut from OSE is perfect with twin rudders and motor mount is made by Hervé http://www.mini-meca-rc.fr/ . Flexshaft is a Prestwich Model boats, I hope it' s strong enough This hull is awesome http://img210.imageshack.us/img210/640/waouw.gif http://img210.imageshack.us/img210/640/waouw.gif http://img210.imageshack.us/img210/640/waouw.gif


http://img843.imageshack.us/img843/3480/rapid.jpg

[cugino]

That is a sweet setup.Is there a breakaway on the rudder?

Yes, there is. Boat belogns to my friend.

[Alfa Spirit]

Here is a better picture of the hardware Speedmaster, 2 rudders, etc.. and the Castle Creations 1717 :banana:


http://img802.imageshack.us/img802/9278/racemaster102.jpg

[Rumdog]

Why is it still in pieces?

[Alfa Spirit]

Yes, I' building two other boats; I' ll try to build an OUTERLIMITS REPLICA with custom decals I made. For exemple

http://img856.imageshack.us/img856/5773/ztuning527.jpg

[Rumdog]

Have you finished a boat yet?

[RIPFENCE]

its abstract boat building..real nice parts though.. still wish i had seen the mhz hull go fast

[battlefury]

what happened to the twin genesis with the pair of neu motors?

[sunexim]

These looks very cool and charming in this white:thumbup1:

[DJcz]

Hi, I see that you are interested in my rudder. I'm sending you a link from my building... http://www.modelarske-forum.cz/viewtopic.php?f=51&t=1075
70390
My Page www.djracing.cz

[Espresso]

The big brother MMP Watersnake is 1,40 meter long

http://img576.imageshack.us/img576/9996/temp68.jpg
Awesome looking hull. Huge and very sleek design. Are these new and does anyone have a review? Any US suppliers?

[Alfa Spirit]

Of course for USA contact Brian, his shop is ROCKET CITY RACING

http://www.rocketcityracing.com/Monos_c_88.html

He is a very serious dealer and have those beautiful mono hulls, BrianW on the forum

*