PDA

View Full Version : whats the best way to.........



Griff
12-12-2011, 01:19 PM
Hi,
I am changing the motor and esc on my pro boat stiletto, problem is the motor wires are short and won't reach the esc, whats the best way to alter the wires, is it easy to lengthen the motor wires, or lengthen the esc wires or just solder on an extension to the wire already there
motor is a aqua craft 2030kv esc is a turnigy 120

Thanks
Tom

jamespl
12-12-2011, 01:23 PM
When I tested a new motor on my stiletto I just made a short extension wire with bullets. Prob not super efficient but the easiest way to do it.

Flying Scotsman
12-12-2011, 01:53 PM
Solder the wires with the same gauge and cover with shrink tubing.

Douggie

jasoncyclone
12-29-2011, 01:09 PM
Solder the wires with the same gauge and cover with shrink tubing.

Douggie


I agree with Douggie...