PDA

View Full Version : Starship motor



larryrose11
12-03-2011, 04:17 PM
Hey all
All, Im looking to a motor for my Starship Rigger
I got a bare hull as a gift, and I was not sure it was even a real tenshock, so I first went reinforcing the booms and inside with Carbon / fiberglass. It is now tough as hell, so I want to overpower it!!

Im looking for some recomendations for a motor. I ran it last season on a ebay motor,
http://www.ebay.com/itm/295C-KV3600-Water-Cooled-Inrunner-RC-Racing-Boat-/190606886115?pt=AU_Toys_Hobbies_Radio_Controlled_V ehicles&hash=item2c610e44e3

It ran fine, but kinda slow.
Here it is on 3S, 60A esc, Octura y534 plastic prop.
http://www.youtube.com/watch?v=LrBqhVJs1ZE

I would like to make it go quit a bit faster, so Im looking for a new motor, and prop.
IM thinking somthing like 3200 - 3800 KV range or so, and spin it crazy fast on 4S, 40,000 RPM.
I have some tight space constraints. cant be over 38 mm diameter with the cooling jacket.
Something like a Neu 1107, or Feigao 380xl, or Leopard 2845 Motor.

Recommendations for a motor and prop?
What are the RPM llimits for the Feigao or Leopard?
Thanks!!

larryrose11
12-03-2011, 05:15 PM
Salr,
Is on of the tensnock motors you have or stock work?