13090 kv motor on 6s prop ?

[G-UNIT]

whats a good prop for this high toqure motor on 6s. 3s x 2 5000 mah 1p I am running a m445 and also a m447 cut down to a m446 moded prop, spooned and cupped, temps are good and what would be the next larger prop, any suggestions would help.

[egneg]

Maybe an M545

[G-UNIT]

I;ll check my stock I might just have one, I;m not sure, what about x series props?

[Doby]

290,598 RPM ???

no prop would be the best.....

[G-UNIT]

Sorry that;s a 1390 12xl not a 13090, so with 6s thats aprox 31.136 rpms, I'm bad, correct me if I'm wrong.

[Chrisg81983]

I liked the 290,598 rpm,s better lol

Chris

[Boaterguy]

the threads alone would move the hull at that RPM!
maybe try an X or M 645?

[Make-a-Wake]

Am i missing the type of watercraft?????????????? I would offer a suggestion but the spectrum is so large.........type, size.........what is it?

[Boaterguy]

it's not specified, so we are just assuming.
it would be helpful in case a better prop would be lifiting for a hydro/rigger or 3 blade for a mono.

[Make-a-Wake]

Assuming what "prop" should be ran on "X" boat is crazy..............

[Boaterguy]

but we have props he has already tried and they have performed well with good temps so an upgrade is reasonably suggestible.

[LarrysDrifter]

Boaterguy, you have no clue as to what advise you give to anyone. You are one of THE WORST at offering misleading information. You do not know what kind of hull he has, how can you offer ANY suggestion all? This makes no sense. Take a step back and read some valuable information and get yourself some experience with boats before your hands hit the key board to give advise.

[drwayne]

Boaterguy, you have no clue as to what advise you give to anyone. You are one of THE WORST at offering misleading information. You do not know what kind of hull he has, how can you offer ANY suggestion all? This makes no sense. Take a step back and read some valuable information and get yourself some experience with boats before your hands hit the key board to give advise.

Hurrah... . well said. :noidea::bash:

[steveo]

Boaterguy, you have no clue as to what advise you give to anyone. You are one of THE WORST at offering misleading information. You do not know what kind of hull he has, how can you offer ANY suggestion all? This makes no sense. Take a step back and read some valuable information and get yourself some experience with boats before your hands hit the key board to give advise.

hey now in his defense no one should be making suggestions about what prop to use if there is no info about the boat itself, this combo could be in a tug boat for all we know- you didnt jump on egneg for what he offered and the 2 props suggested are not out of the realm of whats being used

[Boaterguy]

thank you steve.
I honestly feel like i'm in high school, pick on the kid who is closest to suicide so you don't have to live with him anymore.

[Punisher 67]

Thats got to be a type-o ( mistake ) I am going to assume maybe he has a 1390kv motor on 6s which would make more sense . and I also agree without a hull there is just not enough info here to recommend anything .

I would like to add whats recommended for a 1390Kv - 5692 will be drastically different to whats recommended for a 1390kv - 540 feigao so knowing what motor is being used will also be a big help .

[LarrysDrifter]

Nobody wants you dead. Just stop giving misinformation. Simple.

[Make-a-Wake]

Really no sense in even continuing this thread since the OP hasnt replied since November................and we dont know if its a scale Titanic or a floating shoebox..................