RCaddict0
11-10-2011, 07:41 PM
OK...If you guy's read my other thread I just boght a new Thunder Tiger Outlaw JR OBL and when I got it I noticed it had a plastic prop. From what I read metal props are much better. So I called Hobbieco and asked if there was a direct replacement for this boat. They gave me this part number AQUB9725
http://www.gravesrc.com/AQUACRAFT_GrimRacer_42x55_Copper_Beryllium_Titaniu _p/aqub9725.htm
Its the same prop but metal ofcourse. The prob. is when I go to install it the teeth on the shaft are a bit to small to make a secure fit ito the prop. I hope this makes sense so far. Then the next issue is that the shafts not quite long enough with it to tighten the lock nut down all the way. Is there a new shaft I can buy that will work. Thanks
http://www.gravesrc.com/AQUACRAFT_GrimRacer_42x55_Copper_Beryllium_Titaniu _p/aqub9725.htm
Its the same prop but metal ofcourse. The prob. is when I go to install it the teeth on the shaft are a bit to small to make a secure fit ito the prop. I hope this makes sense so far. Then the next issue is that the shafts not quite long enough with it to tighten the lock nut down all the way. Is there a new shaft I can buy that will work. Thanks