what prop next?

[the savy fluxer]

hey guys i have a prop question for ya . i have a 32" pursuit with a 2000kv 4074 Tacon motor,180 amp turnigy ecs, 2 4500 mah 5s lipos in parellel and a x642 prop. im hitting 55 mph and i want to take it to the next level with a prop change.

all my electronics are ice cold not even a little bit of heat. what i would be the next 2 sizes up in prop from the x642?
thanks
and yes i already know this is fast enough and i should not push my luck, but i have too.:flashfire::nono: ya know.
thanks

[Make-a-Wake]

I cant believe you havent burned it up yet on 5s with a 642...........................

[Fluid]

Next up is probably an m545 or m645......:scared:


.

[egneg]

Next up is probably an m545 or m645......:scared:


.

I agree.

[Drax21]

hey guys i have a prop question for ya . i have a 32" pursuit with a 2000kv 4074 Tacon motor,180 amp turnigy ecs, 2 4500 mah 5s lipos in parellel and a x642 prop. im hitting 55 mph and i want to take it to the next level with a prop change.

all my electronics are ice cold not even a little bit of heat. what i would be the next 2 sizes up in prop from the x642?
thanks
and yes i already know this is fast enough and i should not push my luck, but i have too.:flashfire::nono: ya know.

That set-up should take an M645 easily. I know diesel's does on a 2200kv Leopard on 4s so a 2000kv Tacon should be no problem on 5s. Just test it for a minute then bring it in, if all is well carry on. Don't forgot to post a vid!!

[Make-a-Wake]

Your electronics are cold cuz you live in BC, i'm not being negative, i just think you have maxxed it out, i hit 59 in my Pursuit with a 2150kv Leopard with an x442on 5s......................you're runnin an x642. Certainly try it if you must but i bet with a 645 its slower than the 55 you hit.

[the savy fluxer]

thanks guys