PDA

View Full Version : My Apparition...



Turbo Dan-O
09-21-2011, 03:56 PM
6069060691 I love this thing! Current setup is: 3740/1760kv Fighter Cat outrunner, T-180, 2xTurnigy Nano-Tech 3S 45-90c/4000mah(in series), and M440 prop. It makes some power! My stock propshaft broke in the first few seconds of running it on 6S. I am going to swap it over to an .078 wire drive and see if I can get some good full passes out of it.

Dan-O

Turbo Dan-O
11-04-2011, 10:05 AM
Got the wire drive in and everything back together. It's about time to see if I can break it again. Here is a pic of the inside as it looks now.

63336

ray schrauwen
11-04-2011, 07:14 PM
Very nice. Let us know how it runs!

medina619
11-15-2011, 11:52 PM
any new updates?

Turbo Dan-O
11-16-2011, 08:22 AM
Nothing new yet. Been busy around here and have not had much time to take it back out. After the last time we had the boats out mine barley made it back in and my friends Spartan had to be rescued by my "rescue boat" that is just an old hydro with a crawler motor/esc. It got the job done but it was not pretty. I really need to work on a better rescue boat for sure!!!

Dan-O

Prop-a-Gator
02-27-2012, 02:27 PM
Hi Dan-O,
I've got a 37 FC Daytona on order. I'm thinking of running a single 3740 1800kv on 6s. Any new updates or videos of your Apparition? Do you have suggestions for a good reference build log/thread?
Thanks

Turbo Dan-O
03-30-2012, 08:45 AM
Finally got to run it last weekend. Everything came in good on the temps and the new wire drive held up just fine. The boat needs some adjusting though. It wrecks all over the place when I mash it wide open! Going to change some things and take it back out this weekend.

galant2door
03-30-2012, 09:35 AM
I would love to see some vid's Dan-o, I have a similar cat on a 4s set up and it's pretty quick. Yours must be insane

Turbo Dan-O
03-31-2012, 09:05 AM
Haha, it should be fast as hell if I can keep it on the water! I will try to get some videos of it this weekend.