siberianhusky
09-11-2011, 06:13 PM
Yep welding! Just used my mig welder on the freshly cut end of a cable, did an absolutely beautiful job, just a quick twist on the belt sander to put a bit of a chamfer on the tip.
Best part is no solder creep down the length of the cable, everything is in the last 3/32" or so, also next to no heat in the cable.
No flux to corrode the inner strands either.
Don't think it took more than 30 seconds total!
Best part is no solder creep down the length of the cable, everything is in the last 3/32" or so, also next to no heat in the cable.
No flux to corrode the inner strands either.
Don't think it took more than 30 seconds total!