PDA

View Full Version : Impluse w/X642



dmwilson09
09-01-2011, 02:55 PM
Ran the impulse last weekend with a x642 on 4s and the boat ran very well and a bit faster. Now, I live in Texas and it was 107 but the temps on the esc were around 125 and the motor was around 120. The caps on the esc were like 150 - 175 and i do not know if that is normal or not. I did have a little smoke after the first run with the new prop and I was a little nervous when I saw it, but I am pretty sure it was from the fuel tubing I put over the end of the stuffing tube. The flex cable melted the fuel tubing, so I removed it, and I did not have any more smoke in the other two runs. I have a little more tweeking to do, I think shes running a little too wet, but wanted to know if those temps are normal (esp. the esc caps) or if I need to be concerned.