Yet another TS2 build

[flynride]

Hi All,

You have all officially inspired me to build a TS2 electrified. I am planning on building the full length box like others have but this time I am going to use the Blackjack esc and motor. I am ordering the REK lower unit from Ray Monday. I have looked for the hi jack plate but I have been unsuccessful. Can someone help me????

[flynride]

here are some initial pics. I am not sure about the radio box yet. Any suggestions??

[Darin Jordan]

Just about anything you may need to know can be found in this thread:

http://www.offshoreelectrics.com/forums/showthread.php?t=1260


About page 3 or so I posted the link to these radio box drawings that seem to be working out well for people...: TS-2 Radio Box .PDF Drawing (http://home.comcast.net/~djjordan/RC/TopSpeed2_Radio_Box_Drawing.pdf)

Have fun!

[justneedspeed]

If i were to print this would it come out actual size for me to cut.\? Like a template?

[Darin Jordan]

If i were to print this would it come out actual size for me to cut.\? Like a template?


Yes... It's three 8.5x11 pages with index marks... Line up the marks... tape together... and you have your pattern...

Keep in mind that each TS-2 is a little different, so there will be some trimming here and there necessary... but so far people have said things fit well...

[flynride]

Thanks Darin

[justneedspeed]

Yes... It's three 8.5x11 pages with index marks... Line up the marks... tape together... and you have your pattern...

Keep in mind that each TS-2 is a little different, so there will be some trimming here and there necessary... but so far people have said things fit well...

sweet thanks alot.