View Full Version : Yet another TS2 build
flynride
03-08-2008, 10:46 PM
Hi All,
You have all officially inspired me to build a TS2 electrified. I am planning on building the full length box like others have but this time I am going to use the Blackjack esc and motor. I am ordering the REK lower unit from Ray Monday. I have looked for the hi jack plate but I have been unsuccessful. Can someone help me????
flynride
03-10-2008, 02:58 PM
here are some initial pics. I am not sure about the radio box yet. Any suggestions??
Darin Jordan
03-10-2008, 03:18 PM
Just about anything you may need to know can be found in this thread:
http://www.offshoreelectrics.com/forums/showthread.php?t=1260
About page 3 or so I posted the link to these radio box drawings that seem to be working out well for people...: TS-2 Radio Box .PDF Drawing (http://home.comcast.net/~djjordan/RC/TopSpeed2_Radio_Box_Drawing.pdf)
Have fun!
justneedspeed
03-10-2008, 03:59 PM
If i were to print this would it come out actual size for me to cut.\? Like a template?
Darin Jordan
03-10-2008, 04:13 PM
If i were to print this would it come out actual size for me to cut.\? Like a template?
Yes... It's three 8.5x11 pages with index marks... Line up the marks... tape together... and you have your pattern...
Keep in mind that each TS-2 is a little different, so there will be some trimming here and there necessary... but so far people have said things fit well...
flynride
03-10-2008, 04:15 PM
Thanks Darin
justneedspeed
03-10-2008, 04:26 PM
Yes... It's three 8.5x11 pages with index marks... Line up the marks... tape together... and you have your pattern...
Keep in mind that each TS-2 is a little different, so there will be some trimming here and there necessary... but so far people have said things fit well...
sweet thanks alot.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.