PDA

View Full Version : Water problem



Mike whiting
08-07-2011, 11:30 PM
I keep getting water in where the servo is I have put new zipties on the rubber where the steering cables are tape everything don't know what else anyone got any ideas

battlefury
08-09-2011, 11:08 AM
Corrsion X your servo electronics and apply marine grease on the gears

Mike whiting
08-09-2011, 11:36 AM
That's a good idea. I actually found where the water was coming in. The 2 holes up front that hold the cowl on, 1 hole went all the way through I would blow on 1 and hear air come out the servo box. I filled hole up with epoxy and going to redrill