micro out board run about

[Eyekandyboats]

some of you remember the small Micro COD i did . the kit from. wwwosbornmodelkits.com
Well i did another one but this time with a micro out board . modeled after a Glen L squirt and my OB will by a Yamaha
i think its looks pretty scale
In just a few more days i will have a scale evinrude out board as well. along with a seafle hydro
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2971.jpg
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2970.jpg
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2969.jpg

[Eyekandyboats]

http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2965.jpg
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2964.jpg

[Stealth Assassin]

Classy... I like It! :spy:

Where Is the prop going to be?

[Eyekandyboats]

in the water :)
LOL

[Avanti]

pretty slick but a smart man would paint that o/b BLACK

[Stealth Assassin]

pretty slick but a smart man would paint that o/b BLACK


He must be a mariner fan... :noidea: :nopity:

[Eyekandyboats]

HAHA
no i had no black paint. i just threw it on there because i had it lying around

[obrien]

Atleast make it a Mariner and not one of those yamadogs

bye the way, the boat looks nice, and I bet it will be pretty sweet when its done.

[Ocean Racer]

Im going to have to disagree and say he should paint it to look like a YAMAHA 4 STROKE:rockon2:

[Avanti]

Im going to have to disagree and say he should paint it to look like a YAMAHA 4 STROKE:rockon2:
eww you should be banned for that

[goldendesign04]

I think it looks great! yamaha or otherwise ( though a merc thunderbolt ignition would be a total scale look) , my question is;
when are we going to see these boats? Ive checked osborne regularly an have yet to see the hydro, rigger nor this little play boat. (or is this the Canadian One Design??:confused2: )
I am patiently waiting the arrival of any of these. Is this the Canuk Uno Design? Then how do you place servo for the outboard?

Again looks good but its unfair to show kits then not have em for sale:cursing:

(pm me, I have a proposition for you)

-Wayne

[Diegoboy]

That is too cool! Great idea there Taylor.

[Eyekandyboats]

thanks guys!!! thanks so much. There will be another addition to this post soon... very soon with a FULLY scale version of a seafle. down to the dead man stick and choke button on the SCALE eveinrude outboard!!!! it will make you droool


Golden. The micro COD ( this boat here but my OB) is not on the website, the person who does the website is well..... could be a bit better from my understanding.
we will have a couple items to put on next time so i believe we are going to wait until we have a couple items and do it all at once.
There will me this micro COD, the micro seafle..... MAYBE a outboard such as this one here, the rigger and a sport hydro.
and a couple other train products.
so we will do it once we get all this sorted out.
Oh and cant forget the RTR mono that will go up as well...........



Guys. if you do want a micro COD( the one featured in this thread).. it doesn't have the OB that my own doing.
contact me and i will be sure to get you hooked up, so they are for sale just not on the site yet.

[Eyekandyboats]

Here is how the rudder hooks up
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2981.jpg
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2978.jpg

and for that hydro in the back ground.( its a one off)
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2975.jpg

[Stealth Assassin]

Classy... I like It! :spy:

Where Is the prop going to be?

Submerged drive? It does not look like there Is any room for a surface drive... :spy:

[Eyekandyboats]

yeah. I was going to use a flex shaft and make a bushing in the rudder to support it. But it was to much effort.
LOL

[obrien]

eww you should be banned for that


+1
There is nothing good about any of the yamaha crap out there.

[Stealth Assassin]

+1
There is nothing good about any of the yamaha crap out there.

They don't take to hopping up very well without blowing up.

[Stealth Assassin]

That's a neat little hydro BTW.... How long Is It?

[obrien]

They don't take to hopping up very well without blowing up.


lol yep. thats why you don't see many of them out there in the performance crowd. I quess I am a little biased.

[tylerm]

and for that hydro in the back ground.( its a one off)
http://i152.photobucket.com/albums/s174/eyekandy19/IMG_2975.jpg

Looks like a scaled down whiplash?:spy:

[Eyekandyboats]

:spy: :zip-up:

:wink:

[highndry]

Cool. The shroud mostly resembles a later model Mariner.

I built a Glen L TNT for my kids last year.

[crazzy maxx]

haha kool cowling
any updates?
it looks like the 260 on my dads boat
http://s157.photobucket.com/albums/t70/brettsboard/?action=view&current=61mh3yh-1.jpg

[Eyekandyboats]

No updates I just wanted to show the motor

as for the merc alien cowl. i will be doing one of those as well
i have a graphics package already for it

[Stealth Assassin]

Have you seen my offshore merc dummy rudder cover yet? It should be on my 25" STV thread. Check It out.