View Full Version : Outboard Flex Shafts
Kris Flynn
06-12-2011, 11:22 AM
Hi all
I manufacture 3.5 and 7.5 outboard flexshafts for all the available lower units available, IE REK, Hyperormance, OS, K&B and Lawless.
I make the cables to order generally, usually about a 3-4 day delay in postage.
I sell the 3.5 cables for $31USD Shipped and paypal fees included for 4off
I also custom make the shafts to suit the hyperformance adaptor kit to the OS lower unit, this involves making 1 end of the square on the shafts a little smaller then then other to keep a good fit in both ends to provide minimal slop in each of the prop shaft andf motor coupler.
I have been making these for a couple of years now for the Nitro guys and a couple of people on here.
PM me for details on payment.
Cheers
Kris
Kris Flynn
08-11-2011, 12:14 AM
Hi all,
Just a note to say that I have plenty of shafts in stock, ready to go out with a day or 2 of ordering. Postage usually take 7-10 days.
Thanks
Kris
properchopper
08-11-2011, 11:15 PM
I bought three shafts from Kris last January, one to go, two for spares. Used the first to race spec OPC and also P-OPC SAW's with a BIG motor. First shaft is still in boat working great - spares are getting lonely. Kris makes good stuff :thumbup1:
sailr
08-12-2011, 07:38 AM
4off? Are you saying $31 for FOUR shafts or is it 1 shaft for $31? Sorry, I'm easily confused!
Kris Flynn
08-13-2011, 03:25 AM
Hey,
They are $31 for 4 cables :)
HOTWATER
08-13-2011, 01:03 PM
You will not find better O/B flex's than Kris's.............
-Kent
Joe007
10-10-2012, 03:41 PM
Kris I have a proboat stiletto do you make shafts for it.
Kris Flynn
10-10-2012, 04:37 PM
Hi Joe,
Sure do, they are the same as what is used in a K&B.
Let me know how many you are after via email krisflynn85 @ gmail.com
Thanks
Kris
raptor347
10-10-2012, 05:48 PM
Another thumbs up for Kris' HyperProd/OS cables. The first one I put in my OS lower has survived 2 SAW events and a season of heat racing. My spares are feeling just as neglected as PC's. :wink:
siberianhusky
10-11-2012, 03:36 PM
Gotta try some next season, haven't had much long term luck with the "name brand off the shelf" products going back to the 80's and the very first K&B 3.5 outboard.
Kris Flynn
10-11-2012, 04:17 PM
Thanks for the support Brian :)
pescador
10-13-2012, 08:23 PM
I won the Namba District 16 A-OPC this year with one of Kris's cables, it had come down to the last race of the year and the guy I was hoping to catch snapped his stock flex during the final heat. :laugh:
Thanks Kris, we're stocking up for next year.
Brian T.
Kris Flynn
10-15-2012, 04:55 PM
Thanks Brian, your shafts on on their way!! :)
pescador
10-31-2012, 11:01 PM
Got them thanks Kris and thanks for the extra teflon tubes.
Mel279
11-17-2012, 02:39 AM
hi Kris
I haven't got your reply regarding my order, is it has been shipped yet? its been 2 weeks now:crying:
Kris Flynn
11-25-2012, 04:44 PM
Hi Mel,
You should have them by now??
Cheers
Kris
Mel279
11-26-2012, 06:21 AM
Hi Mel,
You should have them by now??
Cheers
Kris
hi Kris
Not yet, hopefully tomorrow as I got a call from our post office there some of my item arrive, but Im not sure if it is.
Mel279
11-28-2012, 05:58 PM
Receive it y'day, thanks kris
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.