keithbradley
06-08-2011, 10:08 PM
I recently finished building this EKOS (built from bare hull). It has just a few runs on it. I've GPSed it at just over 70mph on 5s lipos, but I would reccomend 4s lipos for sport running. Boat is VERY stable for a boat this speed and handles well.
VIDEO:
http://www.youtube.com/watch?v=khVcEd7wr2Y
* Twin ICE 100 ESCs with data logging (use with pistix or compatable tx)
* Twin 3660 2200kv Tacon water cooled motors
* .150 flexs with 3/16" prop shaft/drive dogs
* Blackbird low pro servo
* Custom carbon fiber motor mounts
* Custom carbon fiber servo tray/mount
* Lots of custom carbon fiber inside
***The boat was originally built with the Suppo inrunners that are in some of the pictures. Those motors are no longer in the boat. I included those pictures because they were taken in daylight which is the only way to get a good photo of a boat with this much carbon fiber. I switched those out for the tacon 2200kv motors. The Tacons have one run on them.
$575 shipped CON US as gift or add 3%
I will include a pair of CR x442's for an additional $50
http://i624.photobucket.com/albums/tt328/keithbradley/100_4851.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4852.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4854.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4860.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4923.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4925.jpg
VIDEO:
http://www.youtube.com/watch?v=khVcEd7wr2Y
* Twin ICE 100 ESCs with data logging (use with pistix or compatable tx)
* Twin 3660 2200kv Tacon water cooled motors
* .150 flexs with 3/16" prop shaft/drive dogs
* Blackbird low pro servo
* Custom carbon fiber motor mounts
* Custom carbon fiber servo tray/mount
* Lots of custom carbon fiber inside
***The boat was originally built with the Suppo inrunners that are in some of the pictures. Those motors are no longer in the boat. I included those pictures because they were taken in daylight which is the only way to get a good photo of a boat with this much carbon fiber. I switched those out for the tacon 2200kv motors. The Tacons have one run on them.
$575 shipped CON US as gift or add 3%
I will include a pair of CR x442's for an additional $50
http://i624.photobucket.com/albums/tt328/keithbradley/100_4851.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4852.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4854.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4860.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4923.jpg http://i624.photobucket.com/albums/tt328/keithbradley/100_4925.jpg