Stiletto Battery and Charger Help

[geradmg513]

I recently decided to get into boats and bought a Pro Boat Stiletto and I am a newbie. These are the recommended batteries

• DYN5351D 7.4V 3200mAh 25C Li-Po
with Deans Connector

• DYN5352D 7.4V 4200mAh 25C Li-Po
with Deans Connector

• DYN5360D 7.4V 5300mAh 25C Li-Po
with Deans Connector

• DYN5361D 7.4V 6000mAh 25C Li-Po
with Deans Connector

What would be a good choice for the battery as well as a charger. I don't want something super expensive but also something that works

[LiPo Power]

The larger mAh the longer your running time will be so go for 6000mAh.
I would get 1 4S 5000mAh or larger LiPo with the higher the better C rating, let's say 40C or up.
Charger that works:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11060
You will need power supply:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9205
Cheers

[JimClark]

get rid of the Deans

[geradmg513]

It looks like that charger is out of stock. Any others? Would these batteries be ok?

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10285

Also how hard is it to change the connector? The boat comes with deans but the batteries have bullet.

Sorry but I'm new to all this. I had a blade cx 3 helicopter before this and it was all very simple

[JimClark]

just need a good 40 watt soldering iron

[LiPo Power]

Most of the chargers on HK website are ok for what you need to do...