gultch
04-22-2011, 04:49 AM
hi all
can someone pls verify my math on an equation
the scenario is i need to work out the metric tonne pressure from a pounds per square inch reading on a vertical hydraulic test rig here goes
hydraulic ram diameter is 1.5 inches the psi is 4000
first area of cylinder 3.14xdxd divided by 4 =1.767
multiply psi x area 4000x1.767=7068
to convert to metric tonnes divide by 2.205 7068divided by 2.205=3.205 tonnes
any one see a problem with this thanks in advance for your time
gultch:confused2:
can someone pls verify my math on an equation
the scenario is i need to work out the metric tonne pressure from a pounds per square inch reading on a vertical hydraulic test rig here goes
hydraulic ram diameter is 1.5 inches the psi is 4000
first area of cylinder 3.14xdxd divided by 4 =1.767
multiply psi x area 4000x1.767=7068
to convert to metric tonnes divide by 2.205 7068divided by 2.205=3.205 tonnes
any one see a problem with this thanks in advance for your time
gultch:confused2: