PDA

View Full Version : SeaKing 180A esc version 1/ version 2?????



crrcboatz
04-18-2011, 09:50 PM
what is the deal with this version 2 thing? How do I know if I have a version 1 or 2?

What are the differences in the 2?

m4a1usr
04-18-2011, 11:48 PM
Hmmmm,..........no one has answered this? I know a bunch of you guys have the answers he's looking for? Let me speak first for the crowd who does know the answers. They must be Ebaying or something. :olleyes:

The major 2 differences I am aware of is the first version had the wires soldered directly to the PC board where as the V2 has a form of bullet connector peened and soldered directly to the board. This was because the first version had some issue with the wires becoming unsoldered during high amp situations and then the esc would smoke due to single phasing.

The second difference is the caps used. First version had 35 volt 470mfd caps where as the V2 has 35v 1000mfd caps.

I bet I missed some other differences. Step up to the plate guy's. Batter up!

John

crrcboatz
04-19-2011, 12:28 AM
Will ck mine tomorrow and thanks. Also, is there a remedy for the soldering issues?