motor mount

[cacofonix]

hi all

if some of you are interested, i'm milling aluminium motor mount.
i mill first one for a friend, and now i have several different model.

- 5692 (4")= 70$
- 5692 5" = 70$
- 5692 + esc plate = 75$
- CC2028 (5") = 70$
- CC2028 (4") = 65$
- CC1717 floor mount = 60$
- CC1717 (4") = 55$
- CC1520 floor mount =58$
- leopard 40xx = 39$
- leopard 2435 = 20$
- NEU 1521 4" + esc plate = 49$
- NEU 1521 = 45$
- NEU 1527 / 1524 = 47$
- NEU 2230 5" = 70$

and small one for 26mm outrunner (19 mm between screws) with integrated water cooling (18$)


international shipping cost for up to 300gr parcel
with tracking : 35$
without tracking : 15$
without tracking economical : 10$

so don't hesitate to contact me

herve

[wparsons]

How much would it be for the water cooled outrunner mount?

[cacofonix]

hi wparsons

for what type or brand of motor ??

[6sHyper]

how much for the 5692 and the 1717 mount?

[wparsons]

A 450 size outrunner (28mm), I think they have 19 and 25mm spacing but it might be 16mm and 19mm.

Like this one:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11177

[cacofonix]

hi

with current version, max ø motor is 26 mm
and 19 mm between screw holes.

but it can not take long to make a larger one !!

herve

[rcbidder]

Requesting motor mount for Neu 1527 going in a H&M 36" Mono(no Rails).
What is your leadtime and price? Thanks, Joe

[cacofonix]

hi rcbidder

thanks for asking
this motor mount will be a little longer than 1521 one
so price is same 50$

for leadtime ..... i can ship it w19 (i'm visiting in-laws next week ......)

herve

[cacofonix]

hi there

for those who are interested
here is NEU 1527 mount first 3D view

i have to check there is no problem with water fitting
when adjusting angle
max angle is 23°

i'm also working on CC2028 mount :tongue_smilie::tongue_smilie: too big

herve

[HYDROJERRY]

Hey i have a theme going in my boat,,,do you think you can do a servo mount for the Hitech low plrofile servo and how much shipped to 27549 US.

[cacofonix]

hello hydrojerry

have you already think to a particular design ?
otherwise i have something for you

i will post pictures soon

herve

[HYDROJERRY]

Sorry for the late reply, so show me some pics and well talk,, my boat is all CF and my motor mounts are shinny aluminum so iwas thinking a aluminum servo mount would look cool,,so let me no. PS its a low profile servo so it will be standing up no turned on its side like others ive seen..

[cacofonix]

hi jerry

here are pics

herve

[HYDROJERRY]

did you say the first pic left to right was for a lowprofile servo??

[cacofonix]

no no

i don't have specific mount for low profile
first pic is standard servo mount
2nd and 3 rd, it's also a standard servo mount i design for maritmo hull.

but it will fit with a low profile mounted on top (not reversed as shown on pics)


herve

[HYDROJERRY]

OK so the 2nd and third pics with the servo bolted on the top side, not upside down will work for a low profile servo, is that correct,,,

[Ksheren]

I will take a mount for a 1527 and a 1521 mount please. shipped price to USA Zip code 48917.

Pm me with a total and delivery time.

Thanks,
Kevin

[Brushless55]

very nice mounts man :beerchug:

[cacofonix]

hi all

thanks a lot

@jerry : yes !!
i will take more pics next sunday when i will be back home
i have a low profile servo to check .

@ksheren : ok
i'm not at home until sunday so i answer you next monday

herve

[cacofonix]

hello

updated first post with shipping cost
just want to know if there is a specific custom policy
with parcel from france.
because i have to fill a form and declare what is in parcel

herve

[cacofonix]

hi there

many mount are almost done (1717 / 1521 / 1527 ) !!
pictures tomorrow !!!

herve

[Punisher 67]

Nice work Herve.................:thumbup:

[cacofonix]

i'm your padawan :0)

[cacofonix]

hello

done !!

first pic : Neu 1521 and 1527
2nd pic : The familly

i'm working on CC2028 rail mount (4")
and next one will be CC1717 rail mount also

herve

[Punisher 67]

Very very nice Herve , Hey what program do you use to control your mill . I use Mach3

[HYDROJERRY]

Those are frickin sweet nice work!!!!

[cacofonix]

thanks guys

@peter : i also use mach3 , most popular cnc software in the world
lot of features, even if i don't use most of them

@jerry : i'm also working of servo mount

herve

[Punisher 67]

Herve here is a servo mount I make and use , feel free to copy it if you want . one is for 4.0" stringers and the other is for 5.0" stringers

[electric]

Herve, So I am in. How much do I need to Paypal you for a Neu 1521 floor mount? Looks like $50.00 + 15.00 shipping = $65.00. Please send me your paypal address and I will send you the $'s.

My address is below if you want to double check the shipping.

10 Barlow Court
The Woodlands, TX 77382

[cacofonix]

hi electric

you are right 65$

i'm not familiar with US address, no name is needed ?

herve

[electric]

hi electric

you are right 65$

i'm not familiar with US address, no name is needed ?

herve

Yes, a name is needed.
Jim Stephens.

The Money has been sent.

[cacofonix]

hi

Kensk and Electric, both parcels are on the way !!!
let me know when you get them

herve

[cacofonix]

hi all

for jerry servo !!

herve

[HYDROJERRY]

That looks good Herve,, ill take one and if its easyer for you, you dont have to do the curves on the sides id be happy even if its just straight!!!!i just need some type of shinny aluminum sides to go with the look of my shinny aluminum motor mounts,, so how much for that one shipped to US 27549???

[cacofonix]

hi jerry

not a problem for curves, it's done with a CNC ...
shipping will be around 10$ i think

what is your lead time ?

herve

[HYDROJERRY]

(Lead time) sorry but what does that mean,, if you mean how long before i need it as soon as you can get it done i gess,, im doing my struts wright now and hopefully im going to place and mount my rudder later to day but still gotta get stuffing tubes orderd and then install them and my motor mounts so it will probly be like 2 weeks before i have to have them maybe just alittle longer!!!! I can wait to do the servo part last its no big deal to place it and install it!!!

[cacofonix]

yess it was my question !!
ok for me

herve

[rearwheelin]

I really like the 1521 mount for hydro...I must have that one for my MK II. I will be using a 1524 NEU 8mm on it..... Can I ask you what size bolts you are using on the side plates ? I am drawn to your mount cause its allmost perfect for my app. I like how you can bolt it down to the floor threw the slits at the bottom and its top side profile good for low profile hydros. Thanks for making such a great mount ! Randy..................... Send me a pm with PP

[kensk]

hi

Kensk and Electric, both parcels are on the way !!!
let me know when you get them

herve

Received the C1717 mount today. Very well made!
Thank you very much
:thumbup:

[cacofonix]

yessssssssssssssssssssssssssssssssssssssssssssssss
so 8 days from france to singapore

i'm happy !!!

@rearwheelin : side bold are M3
sorry but what is PP??

herve

[tomstoys2]

hello


i'm working on CC2028 rail mount (4")
and next one will be CC1717 rail mount also

herve

I might be interested in the CC1717 rail mount. Let me know the cost when you have one complete.
Tom

[Brushless55]

What about a 5692 rail mount?
thanks

[cacofonix]

hello

CC1717 rail mount i start study

5692 rail mount, i have one in stock !!

herve

[Brushless55]

what is the best way to mount one of these hydro style mounts?
thanks..

[cacofonix]

sorry, i don't understand your question ....

[rearwheelin]

PP is short for PayPal...How do I pay you for a NEU 1521 mount for hydro. I would like to buy one.

[rearwheelin]

what is the best way to mount one of these hydro style mounts?
thanks..
I would drill tap 3/8 aluminum square rod with a Dubro m4 drill tap and bolt mount to that and then epoxie to floor. You will be able to loosen bolts and slide the whole mount back for easey collet removal:rockon2:

[rcbidder]

hi there

many mount are almost done (1717 / 1521 / 1527 ) !!
pictures tomorrow !!!

herve

Herve,
Requesting to purchase a CC1717 Alum Mount, shipped to 20151 Zip code in USA, Need your PayPal Address. I can PM with mailing address. Total Cost $50 + $15= $65.00 is that correct? Thanks,

[electric]

Got my new mount in and it looks great!!!

[cacofonix]

hi all

@electric : great !!! you got it, a little bit longer than for singapore ...

@rcbidder : 65$ is correct , i send you pm

herve

[cacofonix]

hi all

the familly picture !!
from left to right :
hitec standard / hitec head down for cat / hitec HS77 / BMS705

2nd pic is for hydrojerry

herve

[HYDROJERRY]

Sweet i like it,, so how much sent to us 27549????

[cacofonix]

so shipping : 8$

support : 19$

herve

[HYDROJERRY]

OK Herve,, give me your PP info and ill sent it sometime today!!! thanks bro..

[HYDROJERRY]

Funds sent,,thanks bro!!!!

[cacofonix]

hello

jerry and rcbidder : parcels are on the way !!

herve

[rcbidder]

hello

jerry and rcbidder : parcels are on the way !!

herve

Got mine yesterday, very nice piece of work!!

[cacofonix]

hi all

thanks joe !!!

new record, 5 days from france to US ...

here are few pics, i'm also using my motor mount :laugh::laugh:
it's a 50" hull with two CC1717 / two T180 and two 5S 8000 mha Lipo pack !!

my only worries are for T180. hope they will do the job

herve

[HYDROJERRY]

got my servo mount yesterday (very sweet looking) thanks Herve!!!!!:beerchug:

[jingalls007]

I'm really digging these mounts. I need one for a 1527 also cacfonix, about how long to ship to Denver Colorado, 80205? I am paypal ready so let me know and I'll send over the funds! Thanks Herve, nice mounts!!

[Ksheren]

Herve
I need a mount for a 2028 for 5" rails.

Kevin

[Punisher 67]

Curious on what you come up with for the 2028 Herve..............:drool:

[cacofonix]

hi guys

there was a french offshore meeting this week end
so i was very busy last weeks

but now i'm back !!!

herve

[Ksheren]

Herve
I need a mount for a 2028 for 5" rails.
Please let me know the cost and shipping to 48917 in the USA.
Kevin

[rcbidder]

Welcome back, Herve.

I would also be interested in a mount for a CC 2028 and a Neu 2230 both 5" rails
Please let me know the cost and shipping to 20151 in the USA.
Joe.

[cacofonix]

ok guys

i let you know

[cacofonix]

hello

one possible design for 2020 5" mount

4 screw on each side is maybe too much

2nd pic is 4082 twin mount for obrien
front part + motor + water jacket
to check if parts are not too close.

60mm between axis

herve

[Punisher 67]

Very very nice Herve..................:thumbup:

[cacofonix]

thanks peter !!!
it's not so easy to design something without thinking to
your mount

some of your technical choice are very good !!

herve

[Punisher 67]

Thanks Herve for the kind words .

I have to give credit to Racemechanix ( Tyler Garrard ) he is the principle designer for that mount , I just spiced it up a bit . Like you he is a very talented man .

Here is a dual 1717 I did a while back , Me and Tyler worked on this one also . Feel free to use whatever on this that will help in your design .

[Ksheren]

hello

one possible design for 2020 5" mount

4 screw on each side is maybe too much

2nd pic is 4082 twin mount for obrien
front part + motor + water jacket
to check if parts are not too close.

60mm between axis

herve

Herve

I like the 2028 mount. give me a price on it with shipping to 48917 and I will paypal you the funds.

Thanks,
Kevin

[cacofonix]

hello

do someone can measure CC2028 ø without fin please ???

so 2028 mount = 70$ +15$ shipping

herve

[Ksheren]

hello

do someone can measure CC2028 ø without fin please ???

so 2028 mount = 70$ +15$ shipping

herve

Herve

The diameter is 54mm without the fins
overall length is 113.2
motor mount hole spacing is 30mm

Let me know when it is finished and I will paypal you.


Thanks,

Kevin

[cacofonix]

thanks kevin

i think first sample will be ready next week

[Ksheren]

great !!:thumbup1::thumbup1:

[cacofonix]

hi guys

i have one remaining point to validate CC2028 mount

can someone measure distance between motor rear and
wires plastic protection ???

i guess 2 or 3 mm .....

thanks

herve

[Punisher 67]

Hello Herve

it is 1.75mm on mine , not a whole lot of meat there

[cacofonix]

:beerchug::beerchug: thanks peter

it's same on CC1717
i will use same oring type

herve

[cacofonix]

hello guys

here they are, CC2028 mounts are ready
3 sets !!

next :
obrien twin 4082
CC1717 4" rail mount
neu 2230

:tongue_smilie::tongue_smilie::tongue_smilie:
no time to spend

herve

[Ksheren]

hello guys

here they are, CC2028 mounts are ready
3 sets !!

next :
obrien twin 4082
CC1717 4" rail mount
neu 2230

:tongue_smilie::tongue_smilie::tongue_smilie:
no time to spend

herve

I will take 1 set. please send me your paypal address .

Thanks,
Kevin

[rcbidder]

hello guys

here they are, CC2028 mounts are ready
3 sets !!

next :
obrien twin 4082
CC1717 4" rail mount
neu 2230

:tongue_smilie::tongue_smilie::tongue_smilie:
no time to spend

herve

Herve,

I will take (1) 2028 Mount, shipped to 20151, I believe: $70 +$15=$85, please confirm and send PM with Paypal info.
Thanks,

[Ksheren]

Herve,

Payment sent and you have a PM.

Thanks,
Kevin

[cacofonix]

ok

thanks !!

[cacofonix]

hi there

here are few pics of twin 4082 for obrien
milling start soon !!

[cacofonix]

hello

i need your help
on NEU chart, 2230 length is 4.7" (119.4mm)
but on next page there is draw where it's written 86 mm

which is good ???

thanks

herve

[rcbidder]

Herve,

Answer: 2230 length is 4.7"(119.4mm)
I had HRC make a cooling can, that is 89mm, so the 86mm must be an error.

Thanks,

[Punisher 67]

That is the length of the old style non cooled version of 2230 , the new style air cooled 2230 are about 12mm longer . Here are pictures of both versions Herve....I know what its like making mounts for motors you have never seen

[cacofonix]

hello peter

arrggg there are screws rear of motor , a nightmare
so not possible to have a full circle for rear mount

[Punisher 67]

Herve they can remove the setscrews and then put them back once the mount clears the rear section , or you can cut some recesses at the rear like in the picture 90* degree's apart

[cacofonix]

obrien, pics a for you !!
mount can be send tomorrow

[rcbidder]

Herve,

I have my Neu 2230 smooth can in front of me, measuring 124.25mm in length/ 57.5mm diameter.
Rear of can has (8) set screw to hold rear plate, so if you notch for screws, I would need (8) set at 45 degrees from each other.
This motor was made on 2/7/2011, it does have the air cooled front end.

Hope this helps.

[cacofonix]

thanks a lot

all dimensions on CC web site are wrong .........
they say 4.7" lenght ......

[FighterCat57]

How about a 2028 mount for 4" rails?

It's for a Sprint Cat 43", so only a very slight V.

[cacofonix]

hello fighterCat

not a problem !!

i think next week it can be possible to ship it

herve

[cacofonix]

hello

me again .... i need mount screw holes dimensions !!
M4 i guess, but how much from center ??

thanks

herve

[FighterCat57]

30mm x m4 =)

[rcbidder]

[QUOTE=cacofonix;335325]hello

me again .... i need mount screw holes dimensions !!
M4 i guess, but how much from center ??

thanks

Herve,

There are (2) sets of M4 screw holes, inner at 33mm c-c, outer at 45mm c-c

Let me know if there is anything else you need.

[cacofonix]

hi

great !!

as i ask you in my PM, i need position and size of
rear screws
i know there are 8 screw, but i need head ø and height
and distance from motor rear

thanks guys

herve

[cacofonix]

hi there

few pics of Neu 2230 mount .... the biggest i've made !!

Rcbider : both mount are ready to be send !!

next one is CC2028 4" for fightercat !!


herve

[rcbidder]

Herve,

They look great, just sent PayPal Gift.

Thanks,
Joe


herve[/QUOTE]

[cacofonix]

hello

work of the day !!
CC2028 4" mount :cool::cool:

herve

[Punisher 67]

Those are very nice Herve , absolutely well done...................:thumbup1:

[ksbuell]

Herve, I'm interested in a 4" rail mount for a CC1717. Can you me make one up for me?

[cacofonix]

hello

as i tell you in PM, i'm not back home until
august 20th

so i will mill it after

herve

[ksbuell]

No PM from you about not being back till 8/20. Maybe have me confused with another member? Anyway, sorry to bother you while your away.

Hope your travels are pleasant!






hello

as i tell you in PM, i'm not back home until
august 20th

so i will mill it after

herve

[cacofonix]

sorry keith
you don't bother me :0)
it's my mistake, i forget this mount version

pleasant travel ............with inlaws

herve

[Backster]

Hi do you still make mounts for neu 1717s? I am completly new to the boating world, do you need any special details from me regarding measurements?
I am located in Norway, please send me a pm.

John Erling

[cacofonix]

hello john

which version, floor mount or rails mount ??

herve

[Backster]

Well, to be honest, Im not sure, it will go in Either a Genesis or an Ospray (HobbyKing) There are rails mounted so maybe rail mount would be best? All help is apriciated :)

[cacofonix]

ok ok

floor mount is a more flexible solution
rail mount .... you must be sure to have 4"" or 5"" between rails

herve

[Backster]

I see, my next stopid question then is how to stick the floor mount to the hull? Epoxy and fibeglass?

JE

[cacofonix]

56803yess

here is a picture of my twin CC1717 hull
mount is glued with epoxy .

herve

[Backster]

That was an impressive sight :)

Then floor mount it is :)

It will be done in a couple of weeks yes?

JE

[cacofonix]

ok, we talk of the same motor : CC1717

i will be back home august 20, so B of september i can ship

herve

[Backster]

Yes the Neu\Caste 1717 :)

Sounds good to me, just give me a Pm when you are ready an I will make the transfer :)

John Erling

[cacofonix]

ok john !!!

[HYDROJERRY]

Hay Herve,, my bro just got a new hull and is looking for someone to make some aluminum rails to hook his motor mount too, you did the stand up servo mount for me do you think you could make him some rails,, i will PM him and tell him to post here..

[CHUD]

Thanks bro ya herve I' need them15''inches long and1''inch and 1/4 high, and can ya put a 60degree on one side so their contur to the hull let me no ,I also PM you thanks

[cacofonix]

hello chuck

nice to meet jerry's brother !!

can you make a draw, to be sure that we talk of same
thing ??

herve

[CHUD]

[QUOTE=cacofonix;345736]hello chuck

nice to meet jerry's brother !!

can you make a draw, to be sure that we talk of same
thing ??Hay herve love your work, take a look at this pic ,can the thickness be 1/4 of a inch ,I hope this will help you,

[HYDROJERRY]

''Dude'' Cacofonix has skillzz man,, make it with some pazzaz!!!!

[CHUD]

And two more pic's pm me a price when your ready

[HYDROJERRY]

Something like this!!!Think about it Chud.. sorry for the super fast drawing..

[CHUD]

''Dude'' Cacofonix has skillzz man,, make it with some pazzaz!!!!GOOD idea brother I'll leave that up to him,my be in the back away from the motor

[CHUD]

OK mybe this will be alittle better,let me no if you can do this bud

[CHUD]

Sorry herve everybody is pm me not to do this in aluminum,I'm sorry if I have glogged up your thread, going to go with carbon fibber sorry

[cacofonix]

no problem at all chuck

but i don't really understand why every body say no aluminium
as i say in you thread, in all my hull, i do every thing in aluminium
last one is a 50" with 2 CC 1717 , 2 seaking 180 and 2 lipo flymax 5S 8000mha

and no problem

don't hesitate to contact me, even if you don't need aluminium parts :0)

herve

[HYDROJERRY]

I thought it was strange too but they all no more than me,,

[cacofonix]

hi there

i'm back home !!!
i have CC1717 4" rail mount in stock

herve

[ksbuell]

I'll take it! PM sent

[cacofonix]

hi there

ok Ksbuell, i answer you

currently i'm working on 5692 5" mount

herve

[cacofonix]

5995059951599525995359954hello

here are some pics of 5692 5" mount

i have to work on finishing :sleep::sleep:

[Brushless55]

wow, nice job man!

[teddyboy]

I need a mount for a 1521 for 4" rails. Do you take paypal or othewr method? Thanks Ted

[cacofonix]

hello Teddyboy

i have a 1521 but it's floor mount version
so i have to design the 4" version

herve

[Backster]

Got my 1717 mount yesterday, I must say Exxelent quality both finish and product. Recomended!!

[cacofonix]

:smile::smile: great !!!!

[teddyboy]

I would like to get one on order as described in post #134, let me know what I need to do. Thanks Ted

[cacofonix]

hi Teddyboy

i answer you in post #135 :0)

it's ok for PP, i will tell you when mount is ready

herve

[teddyboy]

Thank you, your mounts are first class. Looking forward to doing business.

[cacofonix]

hi all

here is the list of current order :
- CC1520 4" = fastisgood
- 6 mount (5692 / 2028) = 6boost
- CC2028 5" = raydee
- neu 1521 4" = teddyboy

:bounce:

[Alfa Spirit]

5995059951599525995359954hello

here are some pics of 5692 5" mount

i have to work on finishing :sleep::sleep:

Very nice job Herve

[cacofonix]

6083260833hi there

last version : CC1520 4"

[properchopper]

Herve,

Your mounts are works of art. Have you ever considered making cooling jackets ? I'd imagine that they'd be just as amazing as your mounts.

[cacofonix]

thanks a lot !!!!

the best cooling jacket came from USA, so ........
i want to keep good relation with HRC :beerchug:

[6BOOST]

Hey Herve, can you add that mount above to my order? Castle 1520 to 4" rails;-) Thank you sir!

Kyle.

[properchopper]

thanks a lot !!!!

the best cooling jacket came from USA, so ........
i want to keep good relation with HRC :beerchug:

Herve,

I was thinking of something along the lines of an all-in-one coolor/mount; maybe with a standardized quick disconnect to allow ease of switching motors. Now that would be cool (sorry, intentional pun).

[Raydee]

Herve, just wanted to see how my 5" rail 2028 mount is coming along?

[cacofonix]

hello RAYDEE

i have 7 mount to mill next week, your 2028 is onr of them !!

@6BOOST = noted !!
herve

[Raydee]

Any update?

[cacofonix]

hello Raydee

i will ship it next week !!
i contact you for adress

[Drax21]

Hi these look pretty good, can you give me an idea of price of a CC 1515 floor mount to go in a DF Cyberstorm V Hull to the UK please.
Thanks

[cacofonix]

hello Drax21

which water jacket do you use ?

[Drax21]

I will be using the HRC Jacket. 2.33" long x 1.90" in diameter.

[cacofonix]

hello

ok, no problem, i have 2 in stock
tomorrow i check shipping price

[Drax21]

hello

ok, no problem, i have 2 in stock
tomorrow i check shipping price
Thanks

[Alfa Spirit]

Herve is making good motor mounts, here is mine for a CC1717 (Deep Vee Fountain)

61850

[cacofonix]

hi there

here are some pics of last mount version
Raydee, CC2028 5P pics is there !!

side part are common, so you can switch between 5692 and 2028

[6BOOST]

Awesome Herve! They came out mint! Can't wait to get them fitted up=) You should look into more multi fit mounts for engines around the same size, you'd be able to have less parts needed to make more mounts and people could pay a little extra and get both rear plates for the same mount in case they ever switch motors. Just sayin;)

6BOOST

[cacofonix]

hi there

thanks Kyle !!!

@DRAX21 : shipping to UK = 2€ ..

[Drax21]

hi there

thanks Kyle !!!

@DRAX21 : shipping to UK = 2€ ..

Ok that sounds good, what is the total?

[Raydee]

Looks great, PM me with the payment details please.


hi there

here are some pics of last mount version
Raydee, CC2028 5P pics is there !!

side part are common, so you can switch between 5692 and 2028

[Drax21]

Hey wondered if the 1515 I bought from you would work with a 1518 too?

[cacofonix]

hello Drax

from end will fit, but not rear part, due to fins
ø difference is not so big (ø40 / ø41.8 )
so you can use rear part but it will not fit exactly with motor

Raydee and Drax21 = parcel are on the way !!!

[Drax21]

hello Drax

from end will fit, but not rear part, due to fins
ø difference is not so big (ø40 / ø41.8 )
so you can use rear part but it will not fit exactly with motor

Raydee and Drax21 = parcel are on the way !!!

Thanks for letting me know Herve. I have bought a 1515 anyway. Gonna look great in my Cyber Storm

[teddyboy]

How is my mount coming along? Thank you Ted

[Raydee]

Raydee and Drax21 = parcel are on the way !!!

Great!

[cacofonix]

hello Teddyboy

you are the next one !!!

[teddyboy]

Thank you very much!

[Drax21]

Hi Herve. Got the mount today. Looks Good. Very fast delivery. Many Thanks

[cacofonix]

great !!!

keep me aware

[Drax21]

great !!!

keep me aware

62279

Had to use the different slots on the mount to line up with my flex shaft but this works :thumbup:

[cacofonix]

whooo

this was not plan but only result count !!!

[Chrisg81983]

Let me know when u figure out that info I gave you thanks

[6BOOST]

Hey Herve,

I received my mounts on Friday and just wanted to let you know they are fantastic, I'll be back to see you for more rear soon;)

Regards, Kyle

[cacofonix]

hello Kyle

that's great news !!!
i was worried having no feed back from you

coooo!

herve

[cacofonix]

63008hello folks

i have finished 1521 4p whit esc plate for Teddy boy !!
i really like it

[properchopper]

63008hello folks

i have finished 1521 4p whit esc plate for Teddy boy !!
i really like it

Thanks Herve, the mods I suggested will make the install more friendly ! Ted should be contacting you ; and you can ship it directly to me to save time & shipping $.

[teddyboy]

Herve, That is a work of art, really great. I have sent you a PM for payment information. Thank you

Ted

[properchopper]

63008hello folks


i have finished 1521 4p whit esc plate for Teddy boy !!
i really like it

Herve, just recieved Ted's mount. Thanks for the mods I suggested, will make for a super install. Actually it's so beautiful I just might wear it around my neck on a silver chain; it's that beautiful :thumbup1:

[cacofonix]

hello Tony

thanks a lot !!

i can mill a special one for you :rockon2:

[6BOOST]

Hi Herve,

Do you have any mounts for NEU1527 and LMT2280 at all? With ESC plate and floor mount? I'd like 2x 1527 mounts and 1xLMT2280 if possible. Also 1717 4" rail mount x1.

6BOOST

[cacofonix]

hello Kyle

i do have already mill a 1527 floor mount
but without esc plate (2 in stock)

same for 1717 4", i have one in stock, but no esc plate

LMT .......you are the first one who ask !!!

herve

[6BOOST]

Sending PM=)

[cacofonix]

680256802668027
hi all

new year = new projects !!
here is my new baby

a mount for Scorpion HK5035 with water cooling and stuffing tube support !!

herve

[Drax21]

That's a work of art !

[lenny]

Hi and Happy New Year,
Would that motor mount work for a t600 outrunner ?
Link http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11980

Thanks for any info.







680256802668027
hi all

new year = new projects !!
here is my new baby

a mount for Scorpion HK5035 with water cooling and stuffing tube support !!

herve

[cacofonix]

hello Lenny

i don't know, there is no data about mounting screw holes

anyway this motor is smaller than HK5035 (ø61 x L66)

herve

[cacofonix]

hi there

someone can explain me where is CLUELESS1 post ???

[lenny]

hi there

someone can explain me where is CLUELESS1 post ???

Hear you go,http://forums.offshoreelectrics.com/showthread.php?31506-WTB-motor-mount

[Clueless1]

Hi Herve!

Pm sent

[lars_01]

Hi Herve!
I need a 4" railmount with ESC-plate for a NEU1527, can you help me out? If so, can you PM me the cost incl shipping to 12461 Sweden.
I´m not in a big hurry;)
Thanks, Lasse

[cacofonix]

hello Lars

i will PM you

herve

[Drax21]

Hi Herve. I bought a 1515 mount off you a while ago. Need a mount for a 1520 now unless I can modify the 1515 mount somehow??
How much for a 1520 floor mount? Motor has longest HRC jacket.
Thanks

[cacofonix]

Hi Drax

i check this and tell you soon

[Drax21]

Hi Drax

i check this and tell you soon

Any good Herve?

[cacofonix]

hello Tim

i have 2 CC1520 mount in stock !!

[Drax21]

hello Tim

i have 2 CC1520 mount in stock !!

Ok just waiting on a sale of some Lipos. Let me know your paypal address and total for the mount.
Thanks

[cacofonix]

Hi there

one more "big boy" !!

mount for CC2028 +esc plate, and a special version for Chris with rails7041670415704147041370412

[Drax21]

Hi Herve
Won't be needing that motor mount as I sold the motor on.
Will need you in the not to distant future though!

Thanks Tim

[cacofonix]

hi all

some new mounts for Tenshock motor

-twin 2250
-single 2250
-twin 15XX

[Punisher 67]

Those are very nice Herve

[teddyboy]

Herve,
What do you have in a mount for a 1527 nue motor, I do not need the esc mounted over the motor. It will be going into a Phil Thomas PT45. I need a suggestion. There are no rail in this type of hull.
Thanks Ted Wachter

[jerryk]

Im looking for a 5" rail mount for a leopard 5692. Thank you

[cacofonix]

hello jerryk

i don't have stock, i will mill one for you !!

herve

[teddyboy]

Herve, any feedback on post #203?
Ted

[egneg]

How much for a 2230 bottom mount with esc plate? The motor is the new style smooth can.

79170

[cacofonix]

sorry ted

i didn't see your post .....i have 2 in stock, floor mount without esc plate (the right one)
79185

@eneg
i already made mount for 2230, but without esc plate, so i have do design it before

[lenny]

Hi,:tiphat:
How are you doing ?
I had asked about motor mount for this outrunner that has 25mm bolt spacing, http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11980
But would like the motor mount water cooled if possible,
Floor mount I think.

Thank for any info.

[egneg]

@eneg
i already made mount for 2230, but without esc plate, so i have do design it before

No hurry, just need to get an idea of the price for now.

[teddyboy]

I want one, just let me know the paypal and information. Do you epoxy it to the floor?

[jerryk]

that sounds good, how much and how long will it take? thank you

[cacofonix]

@ted = yes you can use epoxy to glue it , price = $47 + $10 shipping

@jerry = i think i can ship it next week, i let you know when it's done

@eneg = 2230 FM + esc plate = $75 + $10 shipping

@lenny = check pics, it's a mount for Scorpion HK4035 i done last week. screw holes space is 25mm also
i can mill specific side part with T600 instead of 4035, or whatever you want.

[teddyboy]

Herve, need a pm for your paypal. Thanks Ted

[cacofonix]

hello

my paypal :

paypal@mini-meca-rc.fr

[teddyboy]

Herve, payment sent yesterday. Thank you, Ted Wachter

[cacofonix]

@ted, i don't see any incoming funds ....

[teddyboy]

Sent to mini-meca, June 19th. Let me know if I need to cancel and resend. Trd

[cacofonix]

sorry, nothing in my PP

adress is :

paypal@mini-meca-rc.fr

[teddyboy]

Got it this time, let me know, thanks ted

[cacofonix]

yeeeess , i got it !!

thanks ted

[jerryk]

Hows that 5692 mount coming?

[teddyboy]

Herve, the mount arrived and beautiful as usual. Thanks. Ted Wachter

[jerryk]

I havent heard anything from Herve so I purchased a mount from South River.

[egneg]

@ted = yes you can use epoxy to glue it , price = $47 + $10 shipping

@jerry = i think i can ship it next week, i let you know when it's done

@eneg = 2230 FM + esc plate = $75 + $10 shipping

@lenny = check pics, it's a mount for Scorpion HK4035 i done last week. screw holes space is 25mm also
i can mill specific side part with T600 instead of 4035, or whatever you want.

I am ready for the motor mount, please PM your paypal info ... thanks.

Chuck

[egneg]

This is the fantastic motor mount Herve made for my Neu 2230/1Y. :rockon2:
He gave me permission to post this picture.

87624

[Alfa Spirit]

Fantastic, Hervé makes premium jobs :thumbup1:

[gyrotron]

Hi Cacofonix,

I was wondering if you could make an over the motor ESC (CC ICE2 HV 200A) mount for 5" rails. I will have an AquaStar T20 (same as the Proteus 520) inhabiting the quarters below.

Thx

[cacofonix]

hi there

yes i'm still making motor mount
but we are close to christmas , so delivery will be B of January

[h2o 1]

Hi there,i would like one of your 1527 floor mounts.You do beautiful work!! If you dont have any available at this time,January is fine. I'll keep an eye on this thread,i will send payment whenever your ready. Thanks alot Herve!! Mark

[cacofonix]

noted !!

[h2o 1]

Hi Herve,got any 1527 mounts ready? Thanks!

[cacofonix]

hello h2o1

i have one in stock !!!

[h2o 1]

Thats great Herve,i'll take it! PM me ur paypal info and i'll send ur payment! Thank you Herve! Do you have any of ur standard servo mounts available? If so, i'll take one of those.Also,if you have a spare stuffing tube t bar assembly, i' ll take one of those too! Let me know! Mark

[jason philllips]

92783

apologies, i dont have a scanner to send a technical drawing and only have very basic programmes on the computer, i hope this makes sense. do you think you could make a mount for twin CC2028's with stuffing tube holder and a V base. also the the V has a T section with through holes in it. these would then mount on a V shaped plate to be tapped and bonded into the hull so i could remove the whole mount as required

[Alfa Spirit]

Thank you "slip de pirate"


http://img594.imageshack.us/img594/6009/suxflyp145.jpg

[adifrum]

Hi did you make motor stand for castle 2028?
How much with shipping to NY?

[cacofonix]

hello

yessss !!

you want floor mount or rail mount ?
with or without esc plate ?

[adifrum]

I think rail mount (I want to convert a boat from gas 52'') and to be with esc plate for hydra ice 2. Thank you

[gyrotron]

hi there

yes i'm still making motor mount
but we are close to christmas , so delivery will be B of January
Hello Cacofonix,

I need a motor mount for a Proteus X524 with an ESC plate for a Castle Hydra ICE2 mounted on 5" rails. How much will it we shipped to Tampa, Florida? Here are the motor specs:

http://www.skyrc.com/index.php?route=product/product&path=39_82&product_id=139

Do you have anything already made for this motor?

Thank you

[cacofonix]

9370693707937089370993710hello

shipping to US is around $15 , any states

Proteus looks like a mix between Leopard and TPPOWER

here are some pics of my latest mount (assy 15 minutes ago)

and also one pic of 2028 5" +esc plate

i have a version ready but no pics

[gyrotron]

I am looking for a motor mount version like the last picture you sent. Do you need any other information or dimensions of the Proteus Motor to make sure it will fit or your mount?

[cacofonix]

just screws space (front plate)

[gyrotron]

just screws space (front plate)
It has a 30mm screw pattern.

[cacofonix]

perfect

[gyrotron]

perfect
Do you have in stock? How much will it be?

[cacofonix]

no stock
i can mill one in next 10 days
$75 + shipping

[gyrotron]

no stock
i can mill one in next 10 days
$75 + shipping
Cacofonix,

I have decided to wait until next month. I will let you know when I am ready to place the order.

Thank you.

[jason philllips]

can you send me a pic of your standard twin 2028 motor mount please?

Jason

[cacofonix]

hello Jason

i have done only floor mount version..........one time
so no pic