10gauge
03-22-2011, 10:39 PM
I have a Hyperion EOS1210i Charger and a LBA10 Balancer. I noticed that once the charger nears 90% capacity, the charge current trickles down to around 0.3A. I no longer get 1C charge rate after ~90%. Is this normal???...
I charge my LiPos 1-2 times a year, I can't remember if the charge rate remained constant remained @ 1C or not?...
BTW, My Hyperion LBA10 is rather quirky, it has a tough time recognizing that a battery is connected and I get an error message repeatedly. After about 5 tries of connecting the cable to the cells, keep pressing Mode/Reset, I get the LBA10 to finally initialize, then I am good to go. I wonder if the new Hyperion 0720i Super Duo charger is as quirky with the built in balancers?...
I've been away from the hobby for 2years. I used to be a regular here and on the pond, but I've shied away since our ponds have been overflown with weeds in recent years. However, I am looking forward to spending more time at the pond this spring.
I charge my LiPos 1-2 times a year, I can't remember if the charge rate remained constant remained @ 1C or not?...
BTW, My Hyperion LBA10 is rather quirky, it has a tough time recognizing that a battery is connected and I get an error message repeatedly. After about 5 tries of connecting the cable to the cells, keep pressing Mode/Reset, I get the LBA10 to finally initialize, then I am good to go. I wonder if the new Hyperion 0720i Super Duo charger is as quirky with the built in balancers?...
I've been away from the hobby for 2years. I used to be a regular here and on the pond, but I've shied away since our ponds have been overflown with weeds in recent years. However, I am looking forward to spending more time at the pond this spring.