castle bec eliminator

[dano1]

Anyone using these castle bec eliminators? Are they just a plug and play set up or is there programming required, thinking of going this route over a battery pack

[Diesel6401]

I run one on my MG. Just soldered to the esc power wires and disconnect the esc's bec (red wire). I don't perfer it over a rx pack, but I do perfer it over the esc's bec. I am a rx pack kinda guy these days. I only run that cc bec on 4s. I haven't even tried 5s or 6s on it, to be honest I don't think I ever will.

http://i1238.photobucket.com/albums/ff484/Diesel6401/IMG_20110313_125234.jpg

[dano1]

i THOUGHT YOU DIDNT RUN ONE, LOL...THATS ONE THING THAT I WAS WONDERING IF THERE CAPABLE OF HIGHER POWER, I'LL PROLLY JUST BUY ANOTHER PACK FOR MINE TO, THANKS DALE

[Diesel6401]

i THOUGHT YOU DIDNT RUN ONE, LOL...THATS ONE THING THAT I WAS WONDERING IF THERE CAPABLE OF HIGHER POWER, I'LL PROLLY JUST BUY ANOTHER PACK FOR MINE TO, THANKS DALE

I thought I texted you pic of it installed lol.... Yea nothing bets the old rx pack :bowdown:

[dano1]

Yeah, thats my thoughts also, theres really not alot running verses the rc trucks and they run 3 days easy or more on battery charges, i always top mine off if its been a few runs. Im buying some pretty big batterys that pack some juice and can charge them with my traxxas charger, that was the whole idea behind t and so far been working very well.....except for the one that shorted

[Alexgar]

On my fut fm o 4.8-9.6 I use a 800 mAh lipo for 2.4 I use a turnigy bec works great but I use an external lipO shield after losing a couple packs

[Igoreski]

I use a 800mah 2s lipo with my Castle bec and it will run for a long time before it needs charging,probably 5 or more sets of battery packs.I am running 1 Traxxas 2075 waterproof servo & radio.