PDA

View Full Version : F/S: HOR Twin


Diesel6401
03-18-2011, 03:36 PM
SOLD


Item: HOR 32" cat artr or bnd
Condition: Used
Price/Shipping: BND: $365 shipped, ARTR: $325 shipped lower 48

Ok guys, really don't want to let it go, but need $$$. I bought it used as a hull/hardware from here. Ran it once on CF40s and got 53.1mph, currently I have CF45's on it and should get close to 60mph with it. The motor mounts have been re-fitted to accept 25mm bolt pattern. The struts have been modded with 3/16 aeromarine bushings and everything has been re-epoxyed. The esc's are wired in parallel and the I ran it with (2) 3s 6000mah 25-50c nano-techs for 6s. Comes with the following.

Hull: HOR Apparation 32" with Carbon/kevlar reinforcment ($150}
Motors: (2) Suppo 3126 1600kv outrunners, re-badged as Turnigy. {$20 each}
Esc's: Seaking 80HV with 5.5mm bullets, re-badged as Turnigy Marine. {$70 each)
Props: CF40 C/R & CF45 C/R {$20}
Drive shaft: .150 3/16 (PB Miss Geico C/R :doh:)
Couplers: Octura 5mm .150 {$10 each}
Drive dogs: Octura 3/16 {$3 each}
Bushing: Aeromarine .187 {$5}
RX: MR200 {$50}

Total BND: $430

* I do not want to part this out!
tunnelvision
03-22-2011, 01:29 PM
Diesel, I'll take it if its still available.

Thanks,
Rob
Diesel6401
03-22-2011, 01:32 PM
Diesel, I'll take it if its still available.

Thanks,
Rob

Still available. You want artr or bnd?
tunnelvision
03-22-2011, 01:38 PM
Cool, I'll take it BND. Thanks! Paypal is ready, just send me your address.
Diesel6401
03-22-2011, 01:40 PM
Cool, I'll take it BND. Thanks! Paypal is ready, just send me your address.

sending pm.
Diesel6401
03-22-2011, 01:48 PM
Here's a link to the batts I used and they worked great. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11939

Or any 3s 5000mah 30c or higher would work as well. Just FYI...
bigpapa
03-22-2011, 09:05 PM
diesel any other goodies u partin with
Diesel6401
03-22-2011, 11:32 PM
diesel any other goodies u partin with

Only other one I would even think of parting with would maybe be my Stiletto I have been secretly working on :spy:, I haven't even run yet. It's about 85% - 90% complete. Has a seaking 120 and a CC 1512 1800kv. Haven't decided what I want to do with it yet though. Bought it used & gutted it, did some mods to work the motor in, cut the motor shaft down to fit the outboard modded the outboard cover to fit the cc motor. Boat looks cool with that 1512 hanging off the end. Should run very well I hope lol... Other then that I got nothing.