FS: Delta Force Mini Sniper ARTR

[b.mcdaniel.2009]

TRADED. Seeing if there's anyone interested in this sweet little DF Mini Sniper hull only four runs old. OSE 380-540 motor mount running a Tacon 2550 kv 2860 motor W/ leopard water jacket. Turnigy 120 amp esc with 5.5mm bullets motor side. All stock hardware with a Hughey Pinned .130 drive cable that has step down to .125" so you can use almost any prop. Stock servo also. The bottom of hull on the rear pad is scuffed lightly with scotchbright pad so its not so sticky on the water. This little boat throws a heck of a rooster tail!!!!

Some of the clear came off from tape but doesn't affect performance. I ran a carbon 40mm prop on 3s and she moves great and will handel full throttle turns and is ice cold after a full run. I still have original box it came in and will include the stock 3 blade prop. Prop shaft has a little play in strut, not a biggie (lose is fast). Just add RX/TX and lipo. Runs 40+ MPH !!!!!

[b.mcdaniel.2009]

Ttt

[teach]

I am interested but have no idea what to offer you. Would you mind shooting me a PM with a price?

[b.mcdaniel.2009]

I am interested but have no idea what to offer you. Would you mind shooting me a PM with a price?

PM sent.

[b.mcdaniel.2009]

Price listed......

[b.mcdaniel.2009]

Here's a quick video on 3s with a m445.

http://www.youtube.com/watch?v=2j6c5UjTVVw

[99z286spd]

What kind of trades? land vehicles or boats only? The video sold me.....I shouldnt right now but I have to have it....

[b.mcdaniel.2009]

Boat more than land, but wouldn't mind another SCX10 kit version.


Video is poor quality

[99z286spd]

How bout this bad boy? Aluminum frame and alloy axles ....All parts in driveline from scx10 Already built now but was 320.00 when i bought it. no esc or rx though.
Lemme know

[b.mcdaniel.2009]

How bout this bad boy? Aluminum frame and alloy axles ....All parts in driveline from scx10 Already built now but was 320.00 when i bought it. no esc or rx though.
Lemme know

Nice more pics please....Very interested!:biggrin:

Here's some of my old one's....

[99z286spd]

I wanted to buy that one from you but it was going to be a three way swap...

I'm at work all weekend so I do not have access to get u any more pix till Monday or so. If u can hold off I'll get them to you..
Leon

[b.mcdaniel.2009]

10-4

[99z286spd]

Here i got some more a little sooner.....

[99z286spd]

and a few more The blue scx10 is for a comparison

[b.mcdaniel.2009]

Brand of chassis? motor-esc?

[99z286spd]

no esc.....no rx.... motor is 540 mabuchi as SEEN in pix aluminum chassis no "BRAND" or shall i say "custom".... Axial drive parts from scx10

[b.mcdaniel.2009]

Did you buy it from e-bay?

[99z286spd]

No.......
No fleabay

[b.mcdaniel.2009]

Ttt

[99z286spd]

So I take it ur not interested anymore? Let me know...
Leon

[lenny]

How big is that mini mono and what kind of run time for sport running ?

Thanks.

[b.mcdaniel.2009]

How big is that mini mono and what kind of run time for sport running ?

Thanks.

23" long......I get about 4-6minutes on a 4000mah lipo but I'm hard on the throttle.

[b.mcdaniel.2009]

So I take it ur not interested anymore? Let me know...
Leon

You didn't recieve my PM I take it?

[99z286spd]

No sir. Nothing in inbox???

[b.mcdaniel.2009]

What the crap....Sending PM.

[lenny]

OK thanks !
Yes pm are not working !

[b.mcdaniel.2009]

OK thanks !
Yes pm are not working !

No problemo.

[b.mcdaniel.2009]

Price dropped alittle guys......Any taker's?

[b.mcdaniel.2009]

Really No one?

[b.mcdaniel.2009]

Final price drop.

[tim v]

how much shipped to maple ridge bc canada v2x1e3.... thanks tim

[JMSCARD]

brad the vid of you running this boat is VERY nice... that thing carves VERY nice... and goes like hxll too.... haha.... is that just one 3s pack?

[b.mcdaniel.2009]

Yep, just a cheap 3s zippy 30c 5000mah...run times around 8-10 minutes to! Also got the hoping problem taking care of when turning to the right with just a minor turn fin adjustment.:rockon2: I really hate to get rid of it but i can never run it on the lake.

[b.mcdaniel.2009]

how much shipped to maple ridge bc canada v2x1e3.... thanks tim

One moment I'll check Tim......

[b.mcdaniel.2009]

how much shipped to maple ridge bc canada v2x1e3.... thanks tim

USPS is a bit pricey around $40 W/ insurance 3-5 days.....It would of been $15 to ship here so, Ill do $285 shipped to your door.

[a69baldone]

If i wasnt building a brushless emaxx this would be headed my..this is EXACTLY what im looking for..Bump it up for a sweet deal

[b.mcdaniel.2009]

If i wasnt building a brushless emaxx this would be headed my..this is EXACTLY what im looking for..Bump it up for a sweet deal

:beerchug:

[b.mcdaniel.2009]

how much shipped to maple ridge bc canada v2x1e3.... thanks tim


USPS is a bit pricey around $40 W/ insurance 3-5 days.....It would of been $15 to ship here so, Ill do $285 shipped to your door.

Tim, are you still interested?

[johnson22456]

$250 shipped to 63050?

Let me know, thanks.

[b.mcdaniel.2009]

$250 shipped to 63050?

Let me know, thanks.

I traded her off late last night.....I also got my props today.:thumbup1:

[johnson22456]

Dang...

Glad to hear you got the props though.

[b.mcdaniel.2009]

I got that 29" mono Also...Make you a heck of a deal on that......

[Ken Hildreth]

I must be missing something, I cannot tell what the price is? A little help please?

[b.mcdaniel.2009]

I must be missing something, I cannot tell what the price is? A little help please?

Boat was traded. Hince the no price and traded at the OP.

[JMSCARD]

I must be missing something, I cannot tell what the price is? A little help please?

Just helping brad my friend... looks like this boat the mini sniper is SOLD... he has a couple other sick little monos for sale... a REAL nice 29" and a 33"....here ...

http://forums.offshoreelectrics.com/showthread.php?t=23840

and here is the 33"

http://forums.offshoreelectrics.com/showthread.php?t=23418

these are both super clean builds and very strong runners.... If I was in the market for a NICE mono both would be mine! both look of very nice quality build and very, very nice components...