Aquacraft 36-56 1800kv - Y or D wind

[dag-nabit]

I just finished upgrading a pair of original SV27's with the 1800kv motor from the SV27R and Turnigy 120amp ESC's.

Wondering about the timing setting so would like to know if anyone knows for certain if these motors are Wye or Delta wound?

If I can't find out I'll start a low timing setting and work my way up while checking amp draw and temps. But would be easier if I knew the wind configuration.

Thanks
Kevin

[longballlumber]

Just an FYI, but on the Tower website it lists the stock controller at 10 degrees of timing...

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXZGW7&P=Z

Later,
Mike

[dag-nabit]

Thanks Mike.

The Turnigy doesn't have a 10* setting, but I can use 7.5 or 11.25 as a starting point and go from there.

Kevin