DyrtyByrd
03-13-2011, 07:28 PM
maidened my single drive ekos today put it in the water pulled the trigger and it was very slow wouldnt even plain out, so i brought it back in swapped two of the motor wires and tried again, this thing jumped out of the water! i was very suprised no adjustments no tinkering nothing it just ran flawlessly i would estimate high 50s as i dont have a gps yet. is anyone else running a single ekos?
anyways heres my setup
leopard 4082 1500kv
seaking 180 amp
2 turnigy 4000 mah 3s 40c batts (6s total)
futaba s3003 servo
2000 mah 4.8v rx pack
k 42 plastic prop
the only problem i think i have is when i plug the batts in to the esc there is a big pop of a spark is this normal im using 5.5mm bullets
pics and video to come soon!
anyways heres my setup
leopard 4082 1500kv
seaking 180 amp
2 turnigy 4000 mah 3s 40c batts (6s total)
futaba s3003 servo
2000 mah 4.8v rx pack
k 42 plastic prop
the only problem i think i have is when i plug the batts in to the esc there is a big pop of a spark is this normal im using 5.5mm bullets
pics and video to come soon!