PDA

View Full Version : Minicat Hydro prop shaft



sundog
03-13-2011, 12:59 AM
Need one of these: 094 Flex Cable with 3mm propeller shaft for 3mm props that are designed for a drive dog style shaft. Measures approx. 7.65" from end to end

Evidently these were once sold by OSE but are no longer offered. Want to change from the threaded props to drive dog props.

SweetAccord
03-13-2011, 10:53 AM
I thought Minicat sold these also. http://www.minicatracingusa.com/mparts.html

Get with Jim at Minicat racing. Telephone: 813.996.6997 or info@minicatracingusa.com

sundog
03-13-2011, 01:28 PM
Thanks, I looked on his site but don't see them. They have what I 've got, and a "Drive Dog Flex Shaft 3mm Flex shaft 4mm prop shaft". But I need a 3mm prop shaft to fit the bearing/strut. Guess I'll PM Jim. Might have to go to 4mm threaded (M4) props. Crap, I already have several 3mm and 4mm drivedog props, I didn't want to have to stock a third type. I see Steve stocks several sizes of these.

sundog
03-14-2011, 10:33 PM
Turns out the drive dog prop shaft that Minicat Racing stocks is what I needed - it was just mislabeled on the website. Thanks for your help, Jim.

sailr
03-14-2011, 10:58 PM
No problem! I'll get the website corrected! Sorry for the confusion!