ARTR Twin Triton Toysport

[Jesse J]

SSOOLLDD!!!!!!!!!!!!!!!! pymt received

This is a rare hull that is in pristine condition. it saw 3-4 runs before the ponds froze last fall, so essentially just broken in. I could go into why I am selling, but I will just say that I am needing cash pretty badly at this point, so no trades.

here is some video (http://www.youtube.com/watch?v=VXUHYKbtLY0). I had gps readings of mid 50s (on 3S per motor)- I am sure she's got more in her AND you can still go 4S for speed runs if you want. All electronics came back in barely above ambient (less than 90F). near the end of the video, I start pushing her and it shows off how she handles.

$850 plus paypal fees - I'll cover shipping/insurance Cont US - international pays difference


Hull - purchased on swapshop new, added carbon fiber mat and 4" rails, decals are adhesive, so can be painted with very little prep. 31" long. dual through hull water pick up (will add pic later tonight) and one through rudder for independent cooling of each ESC and then split cooling for the motors.

Two new Feigao 9L motors, with thrust bearing and 5mm-.150 Jeff Wohlt couplers
New Peter Zicha twin motor mount
Two gently used Himodel 125A ESC w/ BEC I bought new and water-proofed/cooled myself
Two new .150 flex to 3/16" flex shafts
Two new Speedmaster stingers
Two new b/s x442 props (Egneg's famous matched pair)
new trim tabs and turn fins
Fuller's rudder boom with new rudder - no slop
new high torque servo
5.5 mm bullets to the batteries

Well over $1000 into this ...

Optional boat stand (made from PVC and painted flat black) Add $25 to help with added shipping due to bigger box

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8187.jpg?t=1299687188

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8191.jpg?t=1299687403

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8188.jpg?t=1299687188

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8192.jpg?t=1299687188

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8193.jpg?t=1299687188

http://i298.photobucket.com/albums/mm272/wolfmanfotos/boats/IMG_8194.jpg?t=1299687403

[b.mcdaniel.2009]

WOOOW Jesse I'm loving this boat.....The hull design reminds me some what of real power boat, so do you think she'd handel choppy water without an issue? Did you get a chance to run her on 4s per motor?

[Jesse J]

I am thinking she might do ok on rough water, although I haven't had the chance. I think on 2S per motor and chop less than 12" I could have a lot of fun. I have not run her on 4S per, I was just working on getting the kinks out and then the dang ponds froze. She surprised me on the first run - it worked perfectly!!

It really hurts to let this one go - every once in a while I catch glimpses of her in the shop and she gives me chills with her sexy lines! I didn't offer this as a solution to your request because I didn't think I was in the economic vise that has just tightened some more. But alas, reality took a chunk out of my left cheek.

[Jesse J]

deal has been sweetened: now I cover all of shipping/insurance continental US (international pays extra)

$850 + paypal - shipped! Or round it off to $875 shipped ($850 if paid by gift).

open to reasonable offers

[Lilrich]

Where are you located at.

[Jesse J]

I am in Bozeman MT - 6 hrs drive East of Spokane.
pm replied