rigged insanity 2.1

[Eyekandyboats]

Hey. I got some more shots. I have been building the tub today.
I just have to put done some spar varnish on the hull and the tub is done, next to tackle the sponsons.
I have a old crappy fieago XL can i use for mock up. and 2s2p or 4s1p which every way you have it. and a hydra 240 down the side of it. with your full size MG hi torque servo.

layed a small bit of carbon fiber and kevlar where the stuffing tube exists
the tub is 26,5/8th by 4 inches wide ( add the thickness of the skin) with a hull height of 2.4 inches
you can fit a XL can under there with out a bubble. But some people who runs a NEU 1521 in there with a WJ will need a bubble. So i think it will have a vacuum formed bubble.
and i haven't glued the front part of the deck on yet. so you can see just how far up the cells can go !! you CG will be very eazy to find with his hull, lots of configuration.
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20025.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20023.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20022.jpg

[Eyekandyboats]

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20024.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20027.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20028.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/pictures%201%20026.jpg

[Raydee]

Very Nice!

[Eyekandyboats]

wee gettiing better
after talking a while off form building it , i have to start again. . launch date is on the 27th
so i got the two sponson finished!, and sealed on the inside.

here is the "finished" hull less epoxy

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2554.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2544.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2549.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2548.JPG

[Eyekandyboats]

and here is my perfect CG in just a dead weight hull no added weight what so ever. . . damn i'm good:)
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2555.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2556.JPG

[Eyekandyboats]

update.
paint is on sponons built. rod installed. just waiting to go over to the shop and pick up my speed master!
now just to add Cadillac graphics and Osborn model kit stickers. . . and i'm good to rip her!!
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2563.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2567.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2564.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2566.JPG

[shockerman80]

Looks good should rip

[Darin Jordan]

Taylor... Where do the cell go??

[Eyekandyboats]

they just float behind the boat :) LOL

no no there is room. i will show you, i re did the motor mount so, now it better for the wire drive.
pictures will come in a bit.

[Eyekandyboats]

PICTURES with graphics. .
Steven, Thank you for the hardware! very fast shipping, You have a PM BTW Steven

DARIN- in the pictures you will see 3 lays for the batteries. Tons of room. i can 4s2p in that boat if i move the wires in to a tight spot. it is possible :)
sorry for the fingure prints on the vinyl lol i was eating dinner and doing this as well
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2569.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2571.JPG

[Eyekandyboats]

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2570.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2576.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2574.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2573.JPG

[Eyekandyboats]

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2575.JPG
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/IMG_2568.JPG

[ace028]

That is sweet!!! What do you put over your carbon fiber cloth? epoxy?

[Eyekandyboats]

yes i do.
west system actually

[Doug Smock]

Nice work Taylor!
How long till your water gets soft??

Doug

[Eyekandyboats]

water is soft this weekend in a large canal by some factories. . .
:) never gets frozen and there is no current.
right now i am just trying to find a coupler locally to use for this weekend

[Eyekandyboats]

my setup wasn't the best, i ran a underpowered motor a TINY prop with my strut way up. it ran VERY good with its miss matched setup. tail dragging a bit but i knew that ( small prop and strut to high
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture017.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture018.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture019.jpg

[Eyekandyboats]

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture004.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture005.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture006.jpg

[Eyekandyboats]

http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture009.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture010.jpg
http://sincitytrader.com/Uploader/files/6/rigged insanity 20/Picture011.jpg

[Raydee]

Nice, all the water around here is frozen.

[kck741]

Wow She looks good

[kin]

i think u`ve done a beautiful work on your outrigger, any videos to show and what kinda speed u attaining with it ?

[Eyekandyboats]

Thank you Kin!
I don't have any video. . well thats a lie But it is such poor quality it would not do any justice!!
I am probably getting 40+ mph right now the way it is setup thats slow in comparison to what it should be running.
I am looking to have it push 60 by the time i am setup

[kin]

where do i get materials for building a rig ? seems fun and your rig bug has kinda slowly biting me lol.... watched a video from OSE `micro rig and it was going darn fast and very stable , currently im just running my sv on stock condition with the lipo punches ~ any advice for building a outrigger ?

[Eyekandyboats]

this boat will be coming out as kit VERY shortly.
and can/hopefully be bought though OSE.
i develop boats for for the company in my signature